Red RC » Products

August 29, 2012

Rsector F104V2 Rigid Rear System

Rsector introduce the Rigid Rear System for the Tamiya F104 V2 line of chassis. The system features an extended motor mount which makes the shock tower shorter therefore offering a stiffer structure over all for the shock to work more efficiently. It also offers two wing mounting positions for more downforce when needed. Included in the set that will also fit the RM-01 chassis, are new side frames, carbon fibre braces and hardware.

Click here to view a picture of the parts installed

August 28, 2012

P1 Brand Trackwares shirt

P1 Brand introduces a classic, but distinct, homage to our signature line of products, the P1 Brand Trackwares tee. Born from the passion for art and motorsport, the Trackwares graphic also calls out P1’s hometown pride, Los Angeles, California, and their year of establishment, 2009. This timeless design will feel right at home in the garage, the paddock or on the podium. Made of 100 percent preshrunk cotton and available in small to xxlarge.

Click here to view another picture

August 28, 2012

RC9394 TC6 double joint CVD & body support

RC9394 are happy to release a new line of option parts for the Team Associated TC6 line of touring cars. First up are the double joint CVD drive shafts that minimise the vibration and wheel chatter at high steering angles. They are made from high-quality spring steel and come with spring retainer clips and bearings. Also available for the TC6 are body support posts that are simply slipped over the stock body posts and secured with a body clip. They make for an improved body fit and better transmission of the downforce created by the body shell. The supports are also available for Tamiya and Xray body post diameter.

Click here to view the body supports

August 27, 2012

Serpent Cobra-E composite spur gears

Serpent introduce the 46T, 48T and 50T composite material spur gears for the Cobra-E 1/8th electric off-road buggy. They feature a steel insert moulded in into the gear to maximize precision and durability. The lightweight gears improve acceleration, are more silent and come including gasket and hardware.

Source: Serpent [serpent.com]

August 27, 2012

T-Work’s 5x10x4mm Hyspin bearing

T-Work’s introduce this special 5x10x4mm Hyspin bearing for the use with 1/8th GP buggy clutch bells. The ABEC5 grade bearings feature a special nylon retainer to keep the inner balls in place to let the bearing handle high RPM and high loads better than bearings of a standard design. They come with a silicone seal on one side for easier cleaning and a steel seal on the other side for less friction to create a ball race of maximum performance.

Click here to view another picture

August 26, 2012

Speed Passion Reventon Pro ESC

Tresrey announce the Speed Passion Reventon Pro brushless speed controller. The competition ESC is designed for 2S LiPo use with down to 3.5T 540-size motors, it features a 6V/3A BEC system and sports dimensions of 35x40x20mm. It comes with a machined case that incorporates cooling fins and the controller accepts sensor and sensorless motors. The speedo becomes available in September in laser blue and gun metal colour and will include a programming card to adjust the software parameters.

Click here to view the colour variant

August 26, 2012

Team C short course body

Team C Racing introduce a new short course body shell for the use with their TS2 and TS4 line of trucks. Sporting a different design than the stock shells the TS404 comes clear, with side number plates and side dams and is useable on other 1/10th SC trucks also.

Source: Team C [teamcracing.net]

August 25, 2012

HPI Plazma 6500mAh 95C LiPo & safe case

The HPI Plazma range of battery packs is growing with the release of this new pack. Fitting within all accepted maximum pack sizes, allowing it to fit in any competition touring car, buggy, short course truck and other types of racing car, the 95C power rating will give you plenty of acceleration while the 6500mAh rating will allow you to fully utilise the power of the pack throughout a 5-minute race. It also features a real Dean’s connector and a universal balancing plug for simple maintenance. For charging your LiPo batteries with complete confidence there is the new HPI Plazma Pouch LiPo safe case. The case is flameproof and provides superior protection for your pit area and home from overcharged or damaged batteries.

View the LiPo safe case here