Red RC » Products

February 6, 2012

Clean Tyres – No additives

The tire treatment debate in 1/8th and 1/10th gas on road has certainly divided a lot of racers and the widespread use and inability to consistently and effectively test for these substances has pushed rule makers to allow the use of additive. Some people are tired of waiting for rule makers to do something about it so are taking this matter into their own hands. For example there is a new gas on road race series about to get underway in Europe this season that uses hand out tires and in Switzerland there is the moral commitment movement to not use tire additives. The latter is signed by a number of the top gas racers in the country, and will see the drivers carry the ‘Clean Tyres’ decal on their cars to show that they are against, and do not use, additives and it is a campaign that they wish to spread across Europe.

Read the full statement here

February 6, 2012

Futura Wet tyre additive

Futura 2012 have released their new tyre additive for wet surfaces. This new additive has been made with special components to improve traction on tire treads on slippery wet surfaces. It is enough to apply the additive on the tyre 2 minutes before the race or apply 2 coats for better traction, leaving couple of minutes between applications. Also Futura Wet comes in handy airtight cans with application brush, suitable for foam and rubber tyre.

Source: Futura [tyreadditive.com]

February 6, 2012

Spec-R 64P touring car spur gears

Spec-R have released their new 64P touring car spur gears. Made from high quality nylon with carbon, they are smooth, durable and lightweight and can fit a wide range of popular cars. Available from 105T to 116T.

Source: Spec-R [spec-r.com]

February 6, 2012

Advantage Racing Products high quality air filters

Advantage Racing Products is now offering high quality air filters for many popular 1/8 Off-Road Buggies and Truggies. After several months of testing in a variety of conditions, they are very happy with the final product. These Air Filters provide an excellent balance of protection, performance, and cost. They come Pre-Oiled for the ultimate in convenience, and are also available dry for those who prefer to use their oil of choice. Available in packs of 4, 9, and 18 filters they are now available for the Losi 8ight/8ight-T, Serpent S811/S811T, Kyosho MP9 TKI2, Hot Bodies D8/D8T, Durango DNX408 and Mugen MBX6/MBX6T. They are currently working on filters for additional models and expect to have more available this spring.

Source: Advantage RP [advantageracingproducts.com]

February 5, 2012

KM Racing NT1 spur gears

KM Racing continue to release parts for the Xray NT1 with the introduction of their own range of 2-speed spur gears. Made from a durable high grade plastic, they are available in 53T, 54T & 55T for 2nd gear and 58T, 59T & 60T for 1st gear.

Source: KM [km-rc.com]

February 5, 2012

Capricorn rim reamer

Italian company Capricorn have released this rim reamer tool for 1/8th and 1/10th scale wheels. The tool is simple to use, fitting into the back side of a rim and using the axle hole as a central rotation point, it allows your to change the thickness of the wheel by shaving the material away. A rim with thinner material is softer and so provides more traction.

View the 1/10th rim reamer here

February 4, 2012

Toy Fair 2012 – Various 2

Thunder Power RC were showing the latest editions to their range of high end LiPo packs with the introduction of the Advanced Energy 6200mAh 65C 1S pack. The Advanced name means it has the lowest internal resistance and lowest operating temperatures and boasts more voltage, more run time and lightest weight in its class. Other packs include the Short 3800mAh 65C 2S Pro Race pack and the 5000mAh 65C Pro Race saddle pack. For the motor range there is the new Z3R4X 550 sized motor with balanced neodymium rotor and 0-50 degree adjustable timing. In the 1/8th BL category they have the Z3R8 with a ribbed aluminium heat sink can, balanced 4-pole neodymium rotor and will be available in 1400kv, 1900kv, 2100kv and 2400kv. Finally TP showed of their new TP1430C charger with 1000W/30A max charge and 100W max discharge.

Click here for more information and photos

February 4, 2012

Toy Fair 2012 – RB Products

RB have their new line of Xtrem engines on show with a simplified naming structure and reduced number of motors. In the buggy line up there is the new BX, a 5+2 port .21 engine with a 14.5mm crankshaft and CNC machined piston. The BXR is the high end version of this motor with balanced and lightened crankshaft and ceramic main bearing. For on road there is the CX which is a 9+2 .21 port engine again with 14.5mm crankshaft and CNC machined piston. It is also available as an R version with 2 additional lubrication holes, ceramic bearing and lightened balanced crankshaft. Finally for 1/10 touring there is the TX which has 3 ports and an 11.9mm crankshaft and the R version has the extra lubrication holes in the liner as well as the additional R benefits of the other engines.

Click here for more information and photos