August 11, 2011

Xray RX8 Ultimate Racing Springs

XrayRacingSprings

Xray release their new line of Ultimate Racing Springs for front and rear shock absorbers. All feature the same thickness wire with the stiffness being controlled by the number of coils. Softer springs with lower “C“ value have more coils whereas stiffer springs with higher “C“ value have fewer coils. They come black coated and the top of each spring is laser engraved with spring size for quick and easy identification. Available as a pair of C7.0 to C10.0 front and C5.0 and C5.6 rear springs, each one is individually measured, controlled, inspected and matched to provide identical damping characteristics. Also available is a progressive C9.0 spring marked as 7-9 that feature a progressive rating from 7.0 to 9.0 while being compressed, making the car steer better at the beginning of the corner, and resist rolling in the middle of the corner because the spring becomes harder. Recommended for medium-high traction tracks.

Click here to view another picture

August 10, 2011

Fastrax 1/10 off-road moulded inserts

Fastrax-MouldedInserts

Fastrax have added new moulded inserts for 1/10 scale buggies to their growing range of tyre accessories. Available in three sizes suitable for 2WD front, 4WD front and rear tyres. The inserts are of a medium profile making them a good all-round solution.

Source: CML Distribution [cmldistribution.co.uk]

August 10, 2011

Fastrax moulded inserts

Fastrax have added new moulded inserts for 1/10 scale Short Course trucks to their growing range of tyre accessories. Especially made for Traxxas Slash and HPI Blitz wheels that require stepped inserts with two different inner diameters.

Source: CML Distribution [cmldistribution.co.uk]

August 10, 2011

Arrowmax MRX-5 rear lower arm shaft

ArrowmaxMRX-5RearSuspensionShafts

Shortly after releasing front lower suspension arm shafts for Mugen’s MRX-5 1/8 scale on-road car Arrowmax now comes up with suitable parts for the rear end. Made from high-quality spring steel the shafts come as pair and are titanium-nitride coated for reduced friction and enhanced durability.

Source: Free Max [freemaxmp.com]

August 9, 2011

F.V.S.S. Futura 2012 tyre additive

FVSS-Futura2012TyreAdditive

Pirani RC in cooperation with F.V.S.S. announce a new odourless tyre additive called Futura 2012. Suitable for both rubber and foam tyres as well as asphalt and carpet tracks, the traction compound already showed its performance during the 2nd round of the Italian 1/8 scale on-road championships. The additive is best applied three hours before the run and comes in handy airtight cans with application brush.

Source: F.V.S.S. [fvssrc.com] and Pirani RC [andreapirani.com]

August 9, 2011

Bittydesign MBX6 Force body shell

bittymbx-6_force

Bittydesign distributor Ansmann Racing release first information on the Force body shell for the Mugen MBX6. Featuring a cab forward design the body was used by 2011 European Champion Robert Battle at the recent 1/8 scale off-road European championships in Sand/Germany. The body gives the buggy more steering due to its cab design, provides better airflow around the engine, is made from 1.0mm Polycarbonate and available soon.

Source: Ansmann Racing [ar-rc.com]

Tonisport
Mibosport
LC Racing
VP Racing
T-Works