Pirani RC have released this new clutch spring for on road 1/8 scale cars. This new generation of springs is made with a special steel that does not lose tension even after long use, helping to keep the clutch consistent for the length of a race, avoiding any loss of torque. Easy to regulate and high performance in high traction track conditions.
Source: Pirani RC [andreapirani.com]
More precision-machined brass chassis balancing weights from Xray, this time designed for their RX8 chassis. Mounted in the front and rear weight integration holes, they come marked with the weight value for easy identification. The front 60g weight can be mounted either fixed or flexible to avoid undesired stiffening effect and you can also add an additional 20g to top of this weight or the other graphite insert. At the rear there is a 20g and 40g weight, only one of which can be mounted at a time.
Source: Xray [teamxray.com]
Pro-Line have introduced lots of new tire updates across the different classes. First up is the Revolver 2.0 M3 off road buggy tire which will now be available pre mounted on V2 white wheels. For the truggy class, the Caliber VTR 4.0″ and Hole Shot VTR 4.0″ 1/8th truck tires will be made available in their new M4 super soft compound. The 1/10th truck class 2.2″ rear tires will also get the same treatment, with the Hole Shot T, Caliber and Suburbs T also now being made available in the M4 compound.
Lots of new SC tire combos from Pro-Line, starting with the release of their new Hole Shot SC 2.0 tire. It features more pins and a wider contact patch for insane amounts of traction and the unique mini-pin design gives the optimum level of traction in dusty, hard-packed and grooved conditions. Available in soft and super soft compounds. Pro-Line have also announced that their Caliber SC 2.0 tires will be available pre mounted on ProTrac Renegade black wheels as well as standard Renegade black wheels. The Trencher and Gladiator SC tires will also now be available pre mounted on Renegade black wheels.
Xray have released 3 new M18 Pro LiPo chassis sets in different graphite finishes. Available in silver, black and blue, they include CNC-machined graphite parts like chassis, top deck, battery holder & top bumper upper holder, molded composite parts like the battery backstops & rear bumper, alu LiPo battery strap posts and mounting hardware.
View the 3 different colour sets here
As a result of actions that were in direct violation of instructions from a ROAR Executive Committee member, ORCA brand speed controls are not permitted in ROAR sanctioned competition for the next six months. The violation stems from a discussion about the true amount of timing in the second generation of ESC from the brand, in which it was not in compliance with the zero timing specification as indicated in the rules. Given that it was only days before the event, it was instructed that the new ESC and the software could not be used. Upon further inspection, it was determined that the new software was loaded on to the previous generation ESC, in direct violation of the timing rule itself, and the instructions of the Technical Director. The six month suspension will take effect 5/1/11, and assuming a satisfactory agreement can be made before the 11/1/11 expiration, the ORCA ESCs can be considered for use in ROAR competition again.
Source: ROAR [roarracing.com]
Akula Racing have announced a range of carbon fibre option parts for the Agama A8 Evo. Designed and manufactured in the UK, the range comprises front and rear shock towers and a centre diff brace. These have been through extensive performance and durability testing, with the final production parts being run at Neo11 with no reported breakages. The front and rear shock towers are made from 5mm thick carbon fibre. Lighter than the standard towers helping to lower the centre of gravity, the standard geometry for the shock and camber link locations is retained with additional lower shock and camber link locations added. These give more tuning options and are especially suitable for low traction tracks where they should provide grip than the standard locations. The centre diff brace is made from 3mm carbon fibre, saving weight over the standard part and increasing the stiffness of the centre diff and brake assembly. The first batch of these parts is in stock now, and as a special introductory offer they are offering free standard shipping to all Red RC readers. Just quote discount code RED1 when ordering.
Subcultures, the popular three tier design from JConcepts, are the latest in 1/8th truck tire development. The elevated, angular, bead configuration provides elements that combine light weight with performance. In general, 1/8th truck tires are heavy and minimizing rubber and insert material was the focus. By utilizing the tire sidewall as the mounting bead, the Elevated design eliminated the need for excess rubber and insert material, dropping weight, while simplifying the mounting / gluing contact patch and location. Designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Subcultures, in green compound, while in new condition excel on hard slick surfaces that are either dry, wet or when traction is hard to come-by. Worn Subcultures on the second or third tier of lugs, excel on surfaces where a groove has formed with minimal dust buildup. At the heart of the revolutionary tire bead for 1/8th truck racing is the Elevated 1/8th truck wheel. Utilizing the tire sidewall as the mounting bead, the Elevated wheel design eliminated the need for excess rubber and insert material, dropping overall weight. Available in bright white and fluorescent yellow the Elevated bead wheel is manufactured in a durable material which is able to withstand the heavy rigors of 1/8th truck racing.
