Red RC » Products

June 22, 2010

JConcepts MBX-6 Punisher & 2.2″ Flip Outs

New from JConcepts is the Punisher body for the Mugen MBX-6. The radical new Punisher body features the slight cab-forward treatment which is amongst the most aggressive in class giving the Punisher top notch performance. Blended wing / body design gives additional down-force to the side-pods and windshield which increases drivability, corner speed and jump control. The rear base of the cab area represents the latest offering for 1/8th buggy racing featuring a super low profile design for increased engine cooling, air flow and escape. Also new are these Flip Outs, giving drivers that tire in-between the Goose Bumps and Double Dees they have asked for. A very small pin construction makes up the foundation for the Flip Outs design and gives the grip when the conditions are wet and green in the morning, when traction is sometimes hard to come-by. These tires are now available in green compound for both the 2.2″ 4wd front wheel and the 2.2″ truck wheel.

View more product images here

June 22, 2010

JConcepts Ford Raptor SVT SCT-R body

JConcepts has reached new ground with the Short Course version of the popular Ford Raptor SVT body for competition Short Course racing, hanging the acronym SCT-R on the new body with the R giving it racing credibility. Officially licensed by JConcepts, the Ford Raptor SVT body is inspired from the ground up as an all-out SCT race body. Beginning with the latest in 1:1 truck detail by incorporating the latest treatment in grill and headlight design, adding street appeal, the front and rear fender flares provide the clearance necessary to run an assortment of tires and wheels while maintaining that exclusive design and look. Extended cab design with recessed side windows, louvers along the front hood highlight a number of the front-end styling cues, while deep recessed trim-out locations along the hood and bed area provide ample space for air relief cut-outs which reduce the parachute / blow-over affect that is so common in Short Course racing.

View more images of the body here

June 21, 2010

Litemodz Pro & Pro X CVAs

New from Litemodz is their Pro and Pro X CVAs available for the Schumacher Mi4LP, Team Associated TC5, Tamiya 416X, Xray T3, Corally PHI, Yokomo BD5 and T.O.P Photon. The Pro Edition CVA’s feature hard anodized black driveshafts and lightened high tensile steel axles. Developed as an upgrade offering super high strength, the high tensile steel axle has been centre bored to reduce overall weight and so a complete set of driveshafts weighs in at 14 grams a pair. The Pro X Edition CVAs feature hard anodized black driveshafts and axles and are a super light upgrade offering maximum performance through the reduction in weight. A complete set of driveshafts weighs in at only 10 grams a pair.

Click here to see the Pro X CVAs

June 21, 2010

Xray ceramic ball axial thrust bearings

Xray have released these precision axial thrust bearings in 3x8x3.5mm for ball diffs and 5x10x4mm for their XCA clutch, featuring ceramic balls. The highest-quality materials and design guarantees the smoothest operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic, which significantly improves lifespan while reducing friction and vibration. Higher RPM capabilities.

Source: Xray [teamxray.com]

June 20, 2010

LRP X12 StockSpec 1S LiPo tuning rotor

This new sintered rotor from LRP is a tuning option for everyone who uses the successful X12 Stock Spec brushless motor in an 1/12th chassis with 1S LiPo for example. The new 12.25mm sintered 1S StockSpec rotor claims to boost the efficiency and power performance of your brushless motor to a completely new level.

Source: LRP [lrp.cc]

June 20, 2010

HPI Savage Flux 2350

The Savage Flux 2350 from HPI takes the basher-proven features of the Savage Flux HP and optimizes the performance for the popular 4S LiPo battery configuration. The result is faster speeds on 4S at a price significantly lower than the Savage Flux HP. Not only is the Savage Flux 2350 faster than the Savage Flux HP on 4S, it’s also faster than the fastest nitro Savage. Easy plug-and-go convenience is the hallmark of electric RC vehicles like the Savage Flux 2350. Just plug in two matching battery packs and you are off and running! The Savage Flux 2350 is clean, quiet, easy to use, and blistering fast.

Source: HPI [hpiracing.com]

June 19, 2010

Vampire Racing range of tools

The new Vampire Racing tools are designed to the highest possible standards, with high quality knurled black anodised aluminium handles. The heat treated tool tips are hard-wearing and easy on even smallest hexes and are available to fit the popular hex sizes 1.5mm, 2.0mm, 2.5mm and 3.0mm as well as 5.5mm and 7.0mm nuts. Tips are available separately should you ever need a replacement or want to upgrade your existing tools.

Source: Vampire Racing [vampire-racing.com]

June 19, 2010

enRoute Berg 2.2 Nano Tracer competition crawler

Brand new from enRoute comes the Berg 2.2 Nano Tracer competition crawler. Featuring a new lightweight carbon dual frame chassis and new “Nano” gear box design for high rotation brushless motor, the axle parts are same of Berg 2.2 V2 axles and Berg 2.2 Tracer chassis kit. The kit includes the new Berg 2.2 Nano axles, upper and lower carbon chassis frame, clear body plate shell, however the wheels and tires are sold separately.

Source: Racing Art [rac.cc]