Red RC » Products

September 27, 2019

WellRC Racing body cut template & starter box plate

A new brand is coming out of SoCal, WellRC Racing by nitro guru Walter Diaz. The first products are body cut templates and starter box plates. Starting with the WellCut templates, they were designed to take the hassle out of mounting ProtoForm R18, R19 and P909 bodies. They are placed on top of the body and accurately trace the cut lines for engine, air filter, fuel tank, roll bar, top end needle, and rear body post holes. Made from high quality ABS plastic for long life, the templates are available for Mugen, Serpent and Xray cars.

Continue reading here

September 26, 2019

JConcepts 1982 GMC K10 1/16th E-Revo body

Coming from JConcepts is the 1982 GMC K10 truck body shell for the Traxxas 1/16th E-Revo. For the early 80’s model year of the popular truck, the iconic square body emerged, a chiseled front-end, gently swept back from the center. Fenders were redesigned as well as the hood and the classic vent windows. A new sloped hood replaced the previous generation hood that had less rake, and the exterior changes include optional headlights and an updated tailgate. Side-markers were now horizontal rather than vertical which is another tell-tale look of the later generation styling. The wheel wells have been scaled to the original size vehicle, for the most clearance or maximum articulation with large tires, it might be necessary to trim further into the fender flares for the tire size used. The square body generation spanned an incredible 14 years and with small changes to grille, headlights, and trim packages throughout the years, JConcepts has added a bonus to the included decal sheet. Five different grille options are included on the sheet giving the user the option of their favorite square body grille and trim package. Quadruple light and double light bezel setups are included which contain bar and tube grille combinations. In addition, a plethora of badges are offered on the sheet featuring Sierra Grande, Custom Deluxe, Cheyenne, Scottsdale and Silverado combinations.

View more images here

September 26, 2019

RDRP B74 aluminium steering optionals

RDRP have introduced their new aluminium steering optionals for the Team Associated B74 buggy in the form of alloy bellcranks and a +4mm steering plate. Starting with the aluminium steering bellcrank set, it is a direct replacement for the standard composite parts, it is machined from aircraft-grade 7075-T6 aluminium and comes black anodised and with machined silver edge details. Using the alloy steering bellcranks over the standard parts adds much needed precision to the steering system while also greatly improving overall durability. The increased overall rigidity will also help with steering emphasis, enhancing the steering feeling especially in high-bite track conditions such as carpet and astro turf.

Continue reading here

September 26, 2019

MonacoRC folding storage box

MonacoRC have introduced their new folding box that allows easy and convenient transportation and storage of smaller parts such as bolts, nuts and ball bearings. Made of sturdy plastics the box features a magnetic closure that ensures the multi-compartment box stays closed even during travelling. The white colour box is decorated with colourful MonacoRC logos and it is available now.

View more images here

September 26, 2019

Axial SCX24 2019 Jeep Wrangler JLUC CRC RTR truck

Coming from Axial is their new SCX24 2019 Jeep Wrangler JLU CRC 4WD micro RTR truck that can be taken both indoors and outdoors. It allows to go crawling on the desk when stuck at work and a messy room becomes an ideal obstacle course. The vehicle can also be taken outside — where its water-resistant electronics are safe from the elements. Full-time 4WD and a 3-link front/4-link rear suspension let the driver muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The truck offers exceptional performance with looks to match. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tyres. For quick battery access makes a tilt back body. Two LEDs in the front bumper light up the trail for night-time crawling. The truck comes ready-to-run with radio and electronics included and installed and it is available in two body shell colours.

View a list of the key features here

September 26, 2019

Xpress Execute FT1 FWD touring car kit – Coming soon

Xpress have issued a teaser image of their production-ready Execute FT1 FWD touring car kit that is scheduled for release in mid-October. The car utilises parts found on the proved XQ1 4WD touring car, such as low-profile shock absorbers, a floating steering servo mount and others, however it also sports new design features such as a front bumper with an integrated cooling fan mount as well as bumper-located front body mounts that ensure easy and reliable body mounting even when running bodies with a lower hood section. Full details will become available in time for the release.

Source: Xpress [rc-xpress.com]

September 26, 2019

Awesomatix tease A800MMX mid motor touring car

Awesomatix have released a first teaser image of their forthcoming new A800MMX mid motor touring car. No official details are available yet but it is understood that the car will be a mid-motor-only offering, rather than a conversion kit as the company’s current top-of-the-foodchain kit that has to be build using the standard rear motor car and the mid motor conversion. Full detail will become available in time for the release which is scheduled for November.

Source: Awesomatix [awesomatix.com]

September 26, 2019

HB Racing vented Mod 0.8 clutch bells

HB Racing have introduced their new Module 0.8 vented clutch bells that help cool the clutch for more reliability during long races. The Mod 0.8 gears have a finer gear pitch for smoother and quieter gear mesh, finer gear ratio adjustment, and improved drivetrain efficiency. They are precision machined from high strength steel and designed to be a direct bolt-in replacement part for non-vented Module 0.8 clutch bells. The clutch bells are available in 16T and 17T specification and they fit HB Racing’s 59T and 60T module 0.8 spur gears.

Source: HB Racing [hbracing.com]