Red RC » Products

May 15, 2018

Bittydesign 1/10th on-road car stand

Bittydesign have introduced their new 1/10th on-road car stand for touring and formula cars. Moulded form high-quality 1mm thick polycarbonate the car stand comes clear and can be customised in many ways. Included is a pair of black anti-slip foam pads and while coming in handy to place the car on top during building, setup and maintenance the stand also incorporates a small parts tray and holes to hold the car’s shock absorbers while filling them with shock fluid.

View more images here

May 15, 2018

Answer RC THECar 5mm carbon Ackermann plate

Answer RC have introduced a 5mm carbon fibre steering Ackermann plate for the JQ Racing THECar Black and Grey Edition kits. Designed to replace the standard alloy Ackermann plate, the carbon part features four flanged bearings and is made from 5mm carbon fibre for strength. The aim of this upgrade is to prevent build up of slop in the steering on both the Black Edition and the Grey Edition. Included, beside the plate and bearings, are also two 25mm button head screws to replace the existing countersunk fasteners.

Source: Answer RC [answer-rc.com]

May 15, 2018

Yokomo touring car body post markers

Yokomo have introduced their new body hole markers for 6mm touring car body posts. The markers help to easily and conveniently locate the body post positions on both clear and painted bodies. Aluminium tubes are placed on all four body posts and the body is placed onto them with four magnets marking the individual front and rear body post positions that then can be marked using a fine line permanent marker prior to drilling. The strong magnetic force of the magnet prevents the body from moving on the markers for even greater precision and the markers come in sets of four in a convenient carrying case.

View more images here

May 15, 2018

RC Cox introduce new T4 option parts

Coming from RC Cox and made for the Xray T4 are several new option parts. Starting with the Xray specific ones, first up is a front low FF suspension mount with optional brass insert. The low specification mount lowers the front suspension pins which improves the car’s rotation in corners while the 8g add-on brass weight allows to fine-tune the car’s weight balance, making it easier to drive. It easily attaches using a single screw for on-the-fly setup changes.

Continue reading here

May 15, 2018

DE Racing G6T short course oval tyres

DE Racing have introduced their all-new G6T and Grooved G6T short course oval tyres. Purpose-designed for dirt oval racing the tyres fit industry-standard 2.2”/3.0” short course rims and they are available in D30 and D40 compounds. No inserts are included but most 1/10th SC inserts will fit to fine-tune the tyre’s performance.

View the Grooved G6T tyre here

May 15, 2018

Arrowmax 2400mA 6.6V Futaba TX battery pack

Coming from Arrowmax and made for Futaba transmitters such as the 7PX, 4PX, 4PK and 4PV is a 2400mAh 6.6V LiFe battery. The softcase pack measures 73x40x16mm and it has the perfect size for the above radios with the high capacity ensuring long operation times. The battery comes pre-wired with a a Futaba-compatible connector and a standard balancer plug for secure charging and balancing.

Source: Arrowmax [arrowmax-rc.com]

May 14, 2018

EcoPower WP110T & WP120T waterproof servos

Coming from AMain Hobbies’ EcoPower brand are two new waterproof servos. The standard voltage WP110T (0.16s/20.1kg-cm) and WP120T (0.09s/28.8kg-cm) are an ideal upgrade for ready-to-run cars, trucks and rock crawlers and they feature metal gears, dual ball bearings and lightweight upper and lower cases with aluminium centre sections. The WP110T is powered by a cored DC motor while the high-voltage compatible WP120T utilises a coreless motor. EcoPower recommends the WP110T servo for all 1/10-scale applications, while the higher power WP120T would be best suited for heavy monster trucks, 1/8-scale vehicles and crawlers.

View lists of the specifications here

May 14, 2018

JConcepts 6.1 motor plate & rear ballstud mount

JConcepts have introduced two new option parts for Team Associated’s 6.1 version off-road kits. First up is a 3-gear laydown/layback motor plate that incorporates a honeycomb milling affect with placement more suited to surrounding geometry making the plate light-weight and very rigid in multiple directions. The honeycomb features add a 3D look featuring the natural aluminium while the rest is available blue or black anodised colours. The motor plate is compatible with the Team Associated B6.1 spur gear guard and remains light of weight. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look quite slim and trim. The plate is usable with the B6.1, B6.1D, T6.1 and SC6.1.

Continue reading here