Red RC » Products

April 16, 2018

Yeah Racing M07 alloy arm mounts & heat sink

Coming from Yeah Racing and made for Tamiya’s M07 Concept M-chassis kit are new aluminium rear arm mounts and a motor heat sink. Starting with the rear arm mounts, the parts are of a modified design with suspension ball inserts to prevent the assembly from binding when the arms sit at an angle. Included are four arm mounts, pivot balls and an assortment of shims to fine-tune the toe angle. Also new is a motor heat sink in blue anodising. As the motor of the M07 sits wrapped within the chassis the heat sink, that is connected to the motor plate, will greatly improve heat dissipation and thus the performance and lifespan of the motor.

View the motor heatsink here

April 16, 2018

Arena 1/10th touring body trim block

Arena have introduced a body trim block for 1/10th touring car body shells. The 3-D-printed tool was designed for the use with a Zebra fine pens and similar fine liners and its design allows to conveniently draw lower body trim lines at heights of 5.5mm up to 7.0mm by simply flipping the block.

View another image here

April 16, 2018

T-Works MP9 aluminium shock stand offs

Coming from T-Works and made for the Kyosho MP9 TKI4 and TKI3 series of buggies are aluminium shock stand offs. The parts are machined from aircraft-grade 7075-T6 aluminium and will reduce the overall weight while lowering the centre of gravity. The stand offs come in sets of four including suitable screws.

Source: T-Works [rc-tworks.com]

April 13, 2018

UREE B6.1 aluminium waterfall & pitch damper

UREE from Japan are currently working on an aluminium waterfall and pitch damper set for the Team Associated B6.1 buggy. The waterfall will be of a slim design to take an optional slim fan unit in order to improve motor cooling while the upper pitch damper improves drivability in a range of track conditions. No word yet on a release date but we are keeping you posted.

View another image here

April 13, 2018

Tekno EB410 composite & alloy Ackermann plates

Tekno RC have announced the release of an updated composite and new aluminium Ackermann plate for the EB410 1/10th scale 4WD buggy. The durability of the new composite Ackermann plate has been improved to help survive those big crashes while the new alloy Ackermann is perfect if racers want the most durable steering assembly possible or are just looking to add a little bling. The composite plate comes including steering bell cranks and three servo horns and it is a bolt-on upgrade for drivers already sing the revised bulkhead, however the part is also usable with the original bulkhead when a slight modification to the pinion bearing support is carried out. As for the aluminium Ackermann plate, the item is supplied without accessories, it weighs in at 5.9g and comes anodised black for a sleek finish.

View the aluminium Ackermann plate here

April 13, 2018

Shepherd Mod 1 20T & 21T pinion gears

Shepherd have introduced new module 1 pinion gears in order to offer a wider gearing range for their Velox E8 1/8th electric on-road kit. The gears are machined from high-quality burnished steel and they come with size engraving for easy identification. Both the 20T and 21T pinion gear are available now.

Source: Shepherd [team-shepherd.com]

April 13, 2018

Reckward-Tuning SRX8 carbon fibre mud guards

RMV Deutschland have introduced the new Reckward-Tuning carbon fibre mud guards for the Serpent SRX8 series of buggies. The parts are moulded from high-quality carbon fibre for a low weight yet greater durability compared to polycarbonate mud guards. The parts attach to the rear lower A-arms and help to keep dust, dirt, mud and moisture away from the rear arms, driveshafts and lower shock parts which results in less dirt and weight build-up over the run. The mud guards come in sets of two and they are a direct fit on the SRX8 and SRX8E.

Source: RMV Deutschland [rmv-deutschland.de]

April 13, 2018

Hiro Seiko Project 4X Evo screw sets

Coming from Hiro Seiko and made for Serpent’s new Project 4X Evo touring car are two new lightweight screw sets. Available now are an all-titanium and also a mixed titanium and aluminium set with the latter including grey anodised alloy screws for the upper regions of the chassis. Using the screws over the standard steel fasteners will scrub a good amount of weight while improving corrosion resistance and looks.

View the mixed titanium and alloy screw set here