Red RC » Electric

February 14, 2009

Xceed RC Cells and Fuel

xceedpcx

The press office at Xceed RC is rather busy with two more press releases hitting our desks as the brand enters the market of providing power for your car with the release of matched cells and nitro fuel. The PCX range of cells are based on the best 4600 NimH batteries available which are selected, pushed and matched by experts in Germany to create packs for the most demanding racers. Available in both Stock and Modified versions they will be available in 4, 5 and 6 cell packs. For nitro racers Xceed have called on respected engine tuner Karl-Heinz Meister to created a special blend of high quality racing fuel that will be produced in the Netherlands by well known fuel producer Jonkers. The Pro-Fuel is made up of the highest quality methanol, mainly mineral oil and small percentage of 3 different types of synthetic oil. Only available in Europe, the fuel will come with 16% or 25% nitro in 1, 2.5 and 5 litre metal cans.

xceedpf

Source: Xceed [xceedrc.com]

February 13, 2009

Novak Ballistic Brushless Motor Series

novakballistic

Novak have released information on a new series of modified brushless motors they are to offer called Ballistic. This next-generation motor series contains a new, easy-to-adjust timing assembly that alters the RPM range, and includes heavy-duty solder tabs that are strong enough to endure repeated soldering and tough crashes. The sensored motors also sport a newly designed exterior with sleek, black end bells and a reconfigured rear end bell that fits more easily into racing vehicles. Each Ballistic motor is also equipped with a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions, and Thermal Overload technology to ensure the motor is operating at a safe temperature. The motors also feature a completely rebuildable design, allowing for the ability to upgrade or replace various motor parts. The new Ballistic series will be available in six different motor turns ranging from 3.5T to 8.5T.

Features
Sensor-based for excellent torque and low-speed driveability
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Rebuildable design with removable shielded sensor harness, sensor assembly, wound stator, sleeve and both end bells
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears
Adjustable timing to help retain previous user settings
Meets ROAR and IFMAR specifications
Meets RoHS compliance and includes 120-Day Warranty
Designed, hand wound and dyno tested by Novak in Irvine, Calif., using globally sourced components

Source: Novak [teamnovak.com]

February 11, 2009

Much More Orange strapping tape

Much More have released this orange colour strapping tape, designed to effectively secure your cells to your chassis plate without the need for a fixed battery strap, saving overall weight. The 50m long and 17mm wide roll has been fabricated from extra high tensile strength reinforced fibre and performs exceptionally well in all temperatures and humidity conditions. As its orange, it will also go well with your orange anodised car, like the Xray, Serpent and others.

Source: Much More [much-more.co.kr]

February 9, 2009

Losi 8ight-E Aluminium Motor heat sink

With Losi pushing full ahead into the brushless 1/8th scale scene, they need to release some additional extras to help with their performance and this 8ight-E aluminium motor heat sink is one such item. It helps to dissipate the heat produced by high-powered electric motors providing lower operating temperatures, by up to 25 to 30 degrees, longer run times and increased motor life. Suitable for 670-sized motors, it installs easily and removes easily for maintenance.

View the heat sink mounted

February 9, 2009

Losi 1300Kv E-Power Combo set

Losi have released this 1300Kv E-Power Combo set which provides 8ight/2.0 platform owners with an easy and affordable way to convert to brushless electric power. The combo includes the electronics and gears needed to achieve ultimate levels of power and top-end speeds. This money-saving combo offers you the consumer a savings of $124.97, when compared to the cost of purchasing each included item at their individual MAP prices. This electric power combo includes one 1/8-scale 1300Kv Xcelorin Brushless Motor and ESC Combo, one 18.5V 4000mAh 5S 25C Hard Case LiPo Battery, one 16T 1.0 Module Pitch Pinion Gear and one 45T Plastic Spur Gear.

Source: Losi [losi.com]

February 9, 2009

Much More Comm polishing set

For those racers that don’t use brushless motors, Much More have released this handy Comm polisher set. It comes with an aluminium dial and a polishing stick and it works by simply removing the brush and inserting the stick. You then mount the dial on the end of the shaft, and lock it in place with its grubscrew, and rotate the dial counter clockwise 10 times and the polishing stick will have the comm polished like new. No need to remove the commutator from the motor or have an expensive comm lathe. The stick is available in both medium and hard versions.

Source: Much More [much-more.co.kr]

February 3, 2009

ROAR LiPo Battery Specification Amendment

ROAR logo

ROAR, the U.S./Canadian sanctioning body for R/C car and truck competition, have announced a 1:8 LiPo Battery Specification Amendment. “The 1:8 Electric Racing Classes are an emerging form of our sport. Our responsibility in ROAR Leadership Role is to outline a set of specifications which ensure a responsible growth and flexibility to leverage advancements based on the benefits they offer our users. The Executive Committee, in accordance with our responsibility to ensure our Members, Organizers, and Affiliate Partners have access to provide the best Technology available for our members benefit, are issuing the following Revision to our 4S Battery Dimension Specifications. The change will allow our Affiliate partners to take advantage of a growing assortment of next generation LiPo cells for 1:8 Electric Racing, as well as the option using larger gauge wire in the assembly process. Rule 8.3.2.3.3. is revising the Hardcase Length dimension from 160mm to 165mm.”

4S Hardcase LiPo Dimension Spec
Current Rule 8.3.2.3.3. Max Brick Style 4S Length: 160mm Width: 52mm Height: 52mm
Revised Rule 8.3.2.3.3. Max Brick Style 4S Length: 165mm Width: 52mm Height: 52mm

Source: ROAR [roarracing.com]

January 28, 2009

Brushless Tornado – Team Orion Vortex BL ESC

When it comes to competition Electronic Speed Controls (ESC’s) for 1/10 scale cars, consumers are faced with an ever expanding range of offerings. One of the newest additions is the Team Orion Vortex BL sensored/less 100A speedo. It was introduced some time ago and is available now. Please do not mistake it for the KO Propo based Team Orion Vortex Race Spec ESC we introduced in our 2008 Electric On-Road Worlds coverage. We hope to bring you a review of the Race Spec version at a later date. But back to the Vortex BL 100A. It comes in a neat cardboard box together with a small but comprehensive manual and a small Team Orion sticker sheet.

Read the full review here