Red RC » Racing

August 19, 2007

Ronny Arnesen wins Norwegian EFRA GP

Our partners Neo Buggy have been covering the Norwegian EFRA GP held this weekend in Skien that saw HoBao racer Joesph Quagraine take the TQ in qualifying. On finals day the rain came and put a bit of a dampener on the day but pole man Quagraine picked up where he left off at the end of qualifying and took the lead from the start up until 20 minutes in when he crashed onto his roof. A confused turn marshall stopped his cars engine, thinking something was wrong, ending the hopes of a win for the Finnish driver. Chris Svensson took over the lead from Quagraine up until 4 minutes from the end when his driveshaft broke taking him out on the spot, but he came home 4th anyway. This allowed local Norwegian driver Ronny Arnesen into the lead where he could control the rest of the race and take the win from Frode Skauen in 2nd and Steffen Culmsee in 3rd.

Click her to see the final results… content

August 19, 2007

Great Lakes Championship Series Rd5

We received a report from round 5 of the Great Lake Championships held at Niagara RC in beautiful Welland Port, which is 40 minutes from Niagara Falls. The Niagara track offered a very technical center race area with tight 45 and 90 Degree turns with challenging rhythm sections that provides some very competitive racing to watch. The track also wound out a large straight which measured at a little over 200 feet.

Click to read the full round 5 report… content

August 18, 2007

Xray NT1 Pinion Gear Tool set

Xray have released this set of two XCA-clutch pinion gear tools to help install and remove pinon gears to and from the XCA clutchbell. The tools are moulded from a special composite mixture which ensures very high durability and very precise fitting to the pinions. The pinion gear tool is specially designed to fit the NT1 pinion gears which have very specific and unique teeth profile and design. The tools fit all NT1 pinion gears, both 1st gears – 15, 16, 17, 18T and 2nd gears – 20, 21, 22, 23T.

Source: Pit Work [pitwork.co.kr]

August 18, 2007

Russian EP Off-road Nationals 2007

Last weekend, the best electric buggy drivers from around Russia came to the RC2 track in Moscow to compete for the 2007 Russian National title. Qualifying saw Kyosho racer Ivan Laptev take the pole position from the JConcepts pairing of Dmitry Malyshko and Victor Spiridonov in 2nd and 3rd. In the race it remained the same with Laptev taking the win and the 2007 title ahead of Malyshko, who was using the MRC Models buggy wing, in 2nd and Spiridonov in 3rd.

Click to see more photos from the event… content

August 17, 2007

Geisendorf takes Rd5 of Swiss 1/8th Nats

The 5th round of the Swiss 1/8th scale Nationals were run last weekend at the fast, but tight, Schaffhausen track in the north of the country. The event saw the pole position go to Serpent 960 driver Markus Geisendorf in a rain interrupted qualifying, with 2nd spot going to Motonica racer and round 3 winner Mattia Pesenti. In the 45 minute final it was Geisendorf all the way as he was able to pull away and take the win from 2nd placed Mugen driver Marco Mueller with 3rd spot going to Simon Kurzbuch.

Source: Trading Tech

August 16, 2007

Graham Alsop wins Truggy Pro Rd3

The 3rd round of the UK Truggy Pro series took place last weekend in Ledbury near the England Wales border and with 100 participants present the weather gods were kind to the racers with the event evntually turning out to be warm and dry. Qualifying saw Kyosho Masters winner Elliot Boots take the TQ spot by 3 seconds ahead of round 2 winner and HoBao racer Graham Alsop in 2nd. After a bit of banging and scraping at the start of the main final it was Boots that emerged in 1st only to be passed 4 laps later by Xray driver Hazlewood and then also eventually by Alsop. With Boots clearly in 3rd it was left to Alsop and Hazlewood to battle it out for the win with the lead swapping a number of times and after the last pitstop it looked like Hazlewood had the win secured, but a coming together with a back marker handed Alsop the lead and despite heavy pressure he could also take the win, with Hazlewood in 2nd and Boots in 3rd.

Source: UK Truggy Pro [uktruggypro.com]

August 15, 2007

Acer Racing Corally RDX Phi bearings

Acer Racing, makers of after market bearing sets, have announced that they have begun selling their Ceramic Nitride Pro Series bearing kits for the Corally RDX Phi US and EU versions. These lightweight bearings have been made using diamond polished ceramic nitride balls for the lowest friction, lowest heat build-up, freest movement & smoothest operation. Available now.

Source: RCCA [radiocontrolzone.com]

August 15, 2007

Manuel Huber wins Austrian Champs Rd4

Xray have a report from their team driver Manuel Huber on the recently held 4th round of the Austrian 1/10th 200mm Nationals. Qualifying saw Huber claim the TQ but with Austrian rules all drivers must race a Semi final and in this race Huber was once again quickest, winning the semi and taking the pole position for the main final. At the start of the final Manuel made a good start, but a split second loss of concentration sent him off the track and back to the back of the field, which allowed Serpent racer Daniel Tomaschko into the lead. A mistake just after 5 minutes forced Tomaschko out of the race and allowed a fast recovering Huber into the lead where he was unchallenged for the remainder of the race and could take the win by 2 laps ahead of Xray team mate Manuel Singer in 2nd and Mugen driver Michael Klausner in 3rd.

Source: Xray [teamxray.com]