Red RC » P Off Road

June 2, 2017

Fantom Racing 5500mAh HV Pro Racing LiHV shorty pack

Available now from Fantom Racing is the 7.6V 5000mAh HV Pro Racing LiHV shorty battery pack. Built from high performance 100C/160C high-voltage Lithium-Polymer cells the battery is ideal for outlaw racing classes or unsanctioned racing. The pack can be charged to up to 8.7V, it measures 95x46x25mm and weighs in at 214g. Its hardcase is equipped with 5mm bullet-type power connectors and a 2mm balancer port.

Source: Fantom Racing [fantomracing.com]

June 2, 2017

RPM Castle Mamba X ESC cage

Coming from RPM and made for most Traxxas 1/10th off-road vehicles is an ESC cage for the Castle Creations Mamba X speed controller. The design allows to securely fasten the speedo in the chassis while also holding the on/off switch neatly. The cage uses the original mounting pattern of the chassis, doing away with the need to use double sided tape while also allowing to easily remove the controller for cleaning and maintenance. The cage for the Castle Mamba X ESC fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 and Rally, while also working on other Traxxas 1/10th scale vehicles as well. The cage is available in black or blue colour and it is made of RPM’s renown nylon material for long lasting performance.

View more images here

June 1, 2017

Reds Racing introduce new exhaust manifolds

Italian company Reds Racing have introduced new exhaust manifolds for .21 rear exhaust outlet engines. The new design connects the manifold to the engine with a much better fit. The end result improves the strength and durability of the spring retainers. The new design also provides improved cooling in the exhaust area to guarantee longer life for the gasket, equalling lower maintenance costs. The manifold is available in three sizes; the medium variant is recommended for short tracks where more bottom torque is required, but top speed will be lower. The second is the short manifold that is recommended for medium or standard-size tracks. It is a good compromise between torque and top speed. Last but not least comes the XS extra short variant that is recommended for tracks with long main straights and to achieve the highest top speed but lower bottom torque.

Source: Reds Racing [reds-racing.com]

June 1, 2017

RDRP XB2 aluminium steering plate

Revolution Design Racing Products have introduced an aluminium steering plate for the Xray XB2 series of cars. It is a direct replacement for the standard composite plate and machined from high-quality 7075-T6 aluminium. Coming black or orange anodised the part adds stability to the steering section which can be beneficial especially on high-bite surfaces where the plate leads to a more crisp steering response as it does not wrap under load. The part is a direct replacement and usable on all XB2 and XT2 series kits.

View more images here

June 1, 2017

PR Racing S1 vented slipper plates

PR Racing have introduced a set of vented slipper clutch plates for the S1 vehicle. Machined from high-quality aluminium and coming hard anodised and with a “vented” design the plates will lower the slipper’s temperatures which results in a more consistent performance. The plates are suitable for the 2WD V2 and V3 buggies as wells the V3T and SC201.

Source: PR Racing [pr-rc.com]

June 1, 2017

Team Magic E6 III +15mm offset hex wheel adapters

Made for the Team Magic E6 III and E6 BES are new +15mm hex wheel adapters. Machined from aluminium and including serrated wheel nuts the adapters greatly increase the overall width of the E6 series vehicles for cooler looks and a wider range of wheel options. The adapters come as pairs and they are black coated for looks and wear.

Source: HRC Distribution [hrcdistribution.com]

May 31, 2017

RDRP XB2 brass RF & RR suspension mounts

Coming from Revolution Design Racing Products are the new brass RF and RR suspension mounts for the Xray XB2 series of cars. They are a direct replacement for the kit’s lightweight parts and add valuable weight especially when running in low-traction conditions or when the track is getting bumpier. Machined from black-coated brass and sporting gold-colour chamfered edges the parts weigh in at 12g (RF) and 15g (RR) which shifts the weight bias further back for improved traction and a more planted ride when running on bumpy tracks. The RF and RR suspension mounts fit all XB2 series cars and trucks except for the XB2D’17, they are available separately and can be used together or in a mix with the standard mounts to achieve the desired weight bias and driving feel.

View more images here

May 31, 2017

Xray XB2 & XT2 graphite side guard braces

Xray have introduced new carbon fibre side guard braces for the XB2 and XT2 off-road vehicles. The parts attach from above to the front section of the chassis, sandwiching and reinforcing the composite side guards around the servo section and ultimately taking flex out of the area for increased corner speed, an easier to drive vehicle and more forgiving landing. Also included in the set are new, narrower composite upper bulkhead connectors.

Source: Xray [teamxray.com]