September 26, 2019

Thurston & Paton win at BRCA 1/8th Circuit finale

The final round of the BRCA 1/8th Circuit Series took place at the Wombwell Circuit near Barnsley with damp weather conditions. Alex Thurston had a great debut for his new chassis sponsors Capricorn, taking the TQ and win in the nitro class from Mugen drivers Andy Hastings and Sam Snell. In the Electric class again Capricorn dominated as Jamie Paton took the win from Rob Scott and 3rd was Shepherd driver Robert Stevenson.

View the Electric class podium here

September 25, 2019

HB Racing E817 long wheelbase chassis

New from HB Racing is a long wheelbase chassis to upgrade the E817 and E817V2 electric buggies to the same wheelbase as the E819. The new chassis is 2mm longer than the stock E817 chassis for improved handling and jumping. The main plate is precision machined from high-quality aluminium for a perfect fit, and hard anodised black for durability. When using the long wheelbase chassis the E819 36mm rear centre dogbone must be used.

Source: HB Racing [hbracing.com]

September 25, 2019

Xray T4 2020 electric touring car – Coming soon

Xray have released a first teaser image of their forthcoming all-new T4 2020 electric touring car kit. According to Xray the car will be a complete redesign with spy shots of prototype cars suggesting a move to the now-popular mid motor/mid spur gear design and possibly also newly designed, longer A-arms. Full details will become available in time for the release.

Source: Xray [teamxray.com]

September 25, 2019

Patrick Hofer takes Swiss Expert Nitro Buggy title

The Neuchatel Mini Buggy Club held round 5 of the Swiss 1/8th Off-road nationals last weekend. In the Expert class it was Christoph Affolter with the overall TQ from Jeremy Pittet in 2nd and Sven Zünd in 3rd. Overall championship favourite, Patrick Hofer only qualified in 7th overall. In the 45-minute main final it then was Jeremy Pittet with the win a lao in front of David Naldini as Patrick Hofer was able to take the final podium spot, some seven seconds behind David. With round 5 being the season finale, also the overall champions would be crowned with his 3rd place being enough for Patrick to bring home another Swiss National Championship title.

Image: Patrick Hofer

September 25, 2019

Helix Designs RX-491 antenna cover

Coming from Helix Designs are two new antenna mounts for the use with the Sanwa RX-491 receiver. The 3-D-printed parts offer a clean sleek way to hold and protect the receiver’s antenna. Helix are offering two different versions; Low Profile and Long Range. The low profile cover keeps the antenna in a small space low and out of the way for a clean looking electronics install. Recommended for medium to small track sizes. Long range holds the antenna upright for a small compact way to make the most range and consistency possible. This comes with the set screw and perfect length antenna tube for the Sanwa RX-491. The latter mount is recommended for the largest of tracks out there. Installation of both required the use of optional double sided tape.

View more images here

September 25, 2019

Paolo Morganti takes ROAR 200mm Sedan title

Last weekend’s 2019 ROAR Nitro On-Road Nationals, held at the One Eighth Racers of Toledo, saw Serpent’s Ralph Burch taking the overall TQ in the 200mm Sedan class, however it was Paolo Morganti (Capricorn) who would be crowned National Champion after the 30-minute A-main final. Qualifying in 2nd Paolo would bring home the win after battling with Ralph for the lead for a good part of the race. The latter would score an unfortunate DNF after about 23 minutes, allowing Paolo to take the lead and bring home the win a lap in front of Shepherd’s Ted Hammer as Serpent’s Jeremiah Ward came in 3rd, some 15 seconds behind Ted.

Source: RC Target [rctarget.com]

September 25, 2019

Exotek RB7 alloy front camber mount & wing stays

Exotek have introduced new aluminium optionals for the Kyosho RB7 and RB6 series of 2WD buggies in the form of an aluminium front camber mount and aluminium rear wing stays. Starting with the front camber link mount, the heavy duty 7075 aluminium construction front bulkhead is of an updated design to accept the RB7 front roll bar and finished with Exotek’s 2-colour black with red chamfer anodising to give any RB7 that extra special factory look. The 1-piece design eliminates the two plastic steering post spacers and includes two M3 set screws to hold in the steering posts for a snug fit. The part is intricately machined to reduce its weight to only 12.4g while insuring its heavy duty construction.

Continue reading here

Tonisport
Mibosport
LC Racing
VP Racing
T-Works