Red RC

May 10, 2019

Coelho tops Q2 from Rheinard

Having rolled out of contention for a TQ run in the opening qualifier at the ETS in Austria, Bruno Coelho has delivered an error free TQ performance on his second attempt. The Xray driver topped the times by 4/10ths from Marc Rheinard, the Q2 pace 3/10ths slower than the opening time set by Ronald Volker. Again leading away the field, Volker looked to be on target for 2 out of 2 as he pulled clear in the early laps but on his fifth lap he spun out in the chicane and spinning again on the following lap the Yokomo driver decided to pull off. This promoted Rheinard to the top of the timing screens but ultimately two bad laps from the Infinity driver was enough to allow Coelho to come out on top. Behind, Lucas Urbain backed up his P5 in Q1 with an impressive drive to claim 3rd ahead of Yannic Prümper, Akio Sobue and Freddy Südhoff.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Volker takes opening qualifier at ETS

Ronald Volker has taken the opening round of qualifying at the fourth round of the Yokomo Euro Touring Series in Austria. With the Championship making its first trip to the technical ERC Wiener Neudorf track, Volker maintained his practice form in the difficult conditions to top the times ahead of No.2 seed Marc Rheinard. With a roll coming onto the main straight eliminating reigning Champion Bruno Coelho from the TQ hunt, it was Xray team-mate Alexander Hagberg who completed the Top 3 ahead of Akio Sobue, Lucas Urbain and Yannic Prumper. Describing the track during practice as ‘the most difficult track I’ve been to so far’, ETS Madrid winner Freddy Sudhoff had an error fill Q1 which left the Awesomatix driver 10th behind Coelho. With bad weather showing in the Vienna area for Sunday, it is going to be a busy Friday for drivers with the schedule being brought forward to run all four rounds of qualifying today to hopefully allow enough time to run all triple finals tomorrow.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Xray XT8 1/8th nitro truggy kit

Xray have introduced their new XT8 1/8th nitro truggy kit. The kit builds on the proven XT8 platform but features refinements in the suspension and chassis area. First up is the new front suspension geometry with updated C-hubs and steering blocks. The latter are of an new design with interchangeable Ackermann plates and moulded-in threaded bushings for the kingpin screws. New to the “2019” model are also updated C-hubs to accommodate the updated steering blocks as well as CV-design driveshafts front and rear to replace the previous universal-type shafts. The chassis was updated to work with the included “soft” radio tray which is the best solution for low to medium bite track while an optional hard radio tray is available when running on high bite surfaces or in high ambient temperatures. For the rear of the truck, Xray have included a new lightweight 1-piece wing mount that is about 40 percent lighter for a lower centre of gravity and optimised overall weight balance. A new wing mount brace helps to prevent gearbox breakage as it connects the wing mount and chassis braces that help to transfer impact energy towards the chassis. Also part of the kit is an updated 7075 alloy shock rear shock tower to accommodate the new rear wing mount, updated rear uprights with larger outer bearings make for improved reliability and upgraded shock absorbers with soft compound bottom-ribbed volume compensator membranes help with suspension efficiency. The kit is rounded out by new aluminium clutch shoes as well as 2.6mm front and 2.8mm rear swaybars.

View a list of the new features here

May 10, 2019

Bittydesign FWD body shell – Coming soon

Bittydesign have released a first teaser image of their forthcoming new body shell for growing 1/10th FWD touring car class. Full details and more images will become available in time for the release which is scheduled for June.

Source: Bittydesign [bittydesign.net]

May 10, 2019

Xray GTX8 4-shoe clutch set

Coming from Xray and made for their GTX8 1/8th scale nitro GT kit is a 4-shoe clutch set. The design makes for improved throttle feel and engine response and it allows for super-easy clutch setting, ranging from soft to hard settings, ensuring optimised performance on different track conditions and with different driving styles. The 4-shoe clutch also features smaller, lighter internal parts, and the design allows for more balanced clutch bell engagement compared to the traditional 3-shoe design. The clutch setting can be tuned with the adjustment nut to control the engagement point as desired. The complete set includes the flywheel, graphite clutch shoes, a medium hardness clutch spring, assembly screws, flywheel collar, flywheel nut and pressure sleeve.

Source: Xray [teamxray.com]

May 10, 2019

Muchmore MRX482 Sanwa-compatible receiver

Muchmore are busy adding more radio equipment to their line up with the latest being the Sanwa-compatible MRX482 2.4GHz receiver. The compact design “antenna-less” receiver unit measures 23.6×18.4×28.4mm and it weighs in at 7.3g. The 4-channel receiver is Sanwa Normal, SHR and SSR mode compatible and it is usable with 3.5V to 8.4V input.

Source: Muchmore [muchmoreracing.net]

May 10, 2019

2019 SBS 1/10 EP Malaysian Major League Rd2 – Report

The second round of the SBS 1/10 EP Malaysian Major League was held at the SBS track in Sungai Buloh, Malaysia recently. Round 2 was run on a full astroturf surface for the first time and most racers found that the high traction surface was easy to drive on but not easy to be quick. Most spent days before the race trying out different tires and shock setups while at the same time learning to drive on such a high grip surface, which is a rarity in this part of the world. This round saw also drivers from the UK and also Indonesia who travelled for the sole purpose of racing. With the aim to make the race day more interesting, this year’s format is a two-round qualifying heat with four rounds of mains per class. In 2WD Modified, it was Team Associated’s Bashir who took TQ and after a close fight during the finals, took the win in the tie-breaker. 2nd place went to Shahrin (Xray) with the 3rd place being taken by Yuri Taruna from Indonesia.

Continue reading the report here

May 10, 2019

RPM Typhon 4×4 3S BLX rear arms

Coming from RPM and made for the Arrma Typhon 4×4 3S BLX is a set of replacement rear A-arms. RPM’s versions are more adjustable, more durable and 5g lighter than stock. The designers added a second shock mount to the outside of the original stock shock mount, adding adjustability and improving trackability. The outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Moulded from engineering grade nylons, the arms are a lot more durable than the standard parts with the redesigned shape of the A-arms helping improve survivability during severe bashing. The rear arms come in sets of two and they are a direct fit.

Source: RPM [rpmrcproducts.com]