As we get ready for the winter season, Tamiya USA has some new warm clothing for fans of the iconic Japanese brand. Part of the ‘Signature Line’, the range includes a pull-over hoodie sweatshirt in charcoal grey with the logo in black, a 1/4 Zip-Up soft fleece sweatshirt in charcoal grey also with black logo and a full Zip-Up hooded sweatshirt in black with a grey Tamiya logos.
JConcepts has released their F2 truggy bodyshell for the Traxxas Sledge. The F2 was recently released for racing truggies has made a huge difference in performance in racing competition. Now, these exciting new features drop straight on to one of the wildest new releases by Traxxas. The body shell is located between front and rear shock tower which keeps the body simple yet covers all the important parts inside the chassis. No longer needed, is the huge and heavy construction of the inner clipless assembly found inside the stock body type. The JConcepts body secures to the chassis with included hook and loop tape that lines the sides of the chassis and inside the body. The F2 body sits on the front extrusions on the diff case providing a shelf to sit on. In the rear, the body sits between clipless chassis mounted geometry. Since the body is now smaller, streamlined for minimal drag, and mounted with simplicity, it’s easy to remove and install for quick bashing sessions. The JConcepts body adds a racing touch to the famous vehicle using the F2 cab style with dual side window design and recessed louvers on the roof. The body features heavy JConcepts chamfering made famous since 2003, lowered bed area for scoop effect and tall side pods to clear an abundance of different battery combinations on the market.
The new Slam-Tech inserts by JConcepts are a new light-weight alternative for RC monster truck racing. Tyre inserts can be just as important as a performance tyre, and in many instances, proves to assist handling in the most difficult conditions. From a competitive standpoint, jump landings are extremely important, but perhaps most important in the monster truck community where the slightest advantage can produce a huge victory in a single racing pass. In testing, using a hard, closed cell type material in the tyres creates smoother rolling speed, more balance in the tyre and helps minimise rebound in the tyres off jump landings. The Slam-Tech is a new generation of insert with molded exclusive materials with radial details found on off-road racing inserts. Traditional open cell inserts weigh ~38gms each, while the Slam-Tech inserts weigh in at ~24gms each. This lowers the rotating weight of any RC monster truck by a considerable amount thus providing more acceleration, better in-air control, less un-sprung weight, and less overall weight. The inserts are compatible with JConcepts tyres such as the 2.6” Renegades, Knobs, Launch, Racer, and Runner.
Source: JConcepts [jconcepts.net]
JConcepts have added two new tyres to their Monster Truck range. The ‘Racer’ tyre is a twist and a turn off the popular Firestorm tire providing a new cutting-edge option. In the past, the only way to modify scale monster truck tires was to slice and cut by knife, taking up to as much as 40 hours per tire. The JConcepts Racer tire has those trimmed sections built into the RC tire pattern featuring crisply “chiseled” carcass removal and heavily back-cut lugs. The sidewalls have been chamfered, removing overhung tread to provide a light-weight design capable of driving through high-traction turns with a freeness that helps quicken the rotation. The tyres are crew-cut to maintain performance in all the right areas while maintaining low-profile with a wide-body base. The ‘Runner’ tyre has a completely lowered lug to create the low-profile stance making it desirable on the racing scene. The lugs have a front and rear edge so they can dig in both directions without throwing too much free dirt.
Pro-Line has released their first body shell for the Axial SCX6 Rock Crawler, a 1978 Chevy K-10. The fully licensed shell gives your 1:6 scale crawler a super scale, retro-classic look with this fleetside Chevy®, which is one of the hottest nostalgic full-size trucks. The 1978 K-10 body has been carefully sculpted with realistic details that recreate the lines and squared-off style of this iconic truck. It is molded from extra-thick, 2mm thick crystal-clear polycarbonate for extra durability on your giant rig. To fit this body to your SCX6, the AXI350001 body post set from Axial is required.
Factory Team has produced this durable and high-performance steering rack upgrade for the RC10B6.4 buggy line. Machined from billet aluminium, the new design utilises a clamping “crush tube” style ball bearing pivot that minimises play in the steering assembly. The result is a more durable and reactive steering assembly that will allow drivers to tune the steering system responsiveness.
Klinik RC has through its Racetec brand released this nitro engine compression gauge. The digital gauge makes checking the health of your engines a breeze. Check the health of your engines in or out of the car quickly and easily, document your engines wear and find potential problems with reliability or performance in seconds. Compression is a basic test of any engine from the car you drive to atv’s and now in RC engines. The compression gauge will fit any RC engine with a turbo style glow plug. The gauge requires 2x AAA batteries.
Source: Klinik RC [klinikrc.com]
JConcepts has released the Mono wheel that is now available for the RC10 Classic vehicle in era correct 1.9” diameter. The popular dish style wheel is now available for the RC10 Classic. JConcepts has identified all the key points of the 1.9” diameter wheels and positioned them so racers can now have popular Mono flair built for the classic design. The base style of the Mono wheel revolves around the time-tested dish look which has been around since the beginning of RC Racing, but, this time, designed to fit the legendary RC10 vehicle. The JConcepts wheel is built in an extremely durable material with a racing look that combines the winning combination of racing from yesteryear, and competition of today. The Mono front wheel accepts the 3/16” x 5/16” flanged bearing or bushing found on the original and Classic RC10. Available in white, black, and florescent yellow colour with a shiny face appearance.
Source: JConcepts [jconcepts.net]
