Red RC

October 3, 2018

Raceform ET410 V2 polycarbonate shock towers

Raceform have released ET410 specific V2 shock towers that are made of a new high-impact modified polycarbonate. They are precisely machined and tested for durability with the rear tour being suitable for rear shock front position conversion with multiple camber locations. M3 threaded camber holes eliminate the use of a nut in order to save weight while calculated flex at critical areas saves gearboxes and shock standoffs. The front tower weighs in at 11g while the rear tower weighs 17g.

View another image here

October 3, 2018

Mark Sousa wins at Brian Decaire Memorial Race

SPARC R/C Raceway of Kingsville, Ontario held the Brian Decaire Memorial Race last weekend. In the Nitro Buggy class Xray’s Mark Sousa was able to take overall TQ and win in front of Serpent’s Abiye Birku on the runner-up spot. Douglas Shewfelt (Serpent) would round out the podium in 3rd.

Source: Xray [teamxray.com]

October 3, 2018

Xpress Execute XQ1 vertical top deck set

Coming from Xpress and made foe the Execute XQ1 and XQ1S kits is a vertical top deck set. The multi-piece top deck was designed to replace the standard top deck with a construction that will increase both forward traction and side bite in low to medium grip track conditions. Several flex features allow to adjust lateral grip by adding or removing centre stiffeners while the design also allows to connect the top deck with the motor mount stiffener post. The set includes all needed parts to perform the conversion.

View more images here

October 3, 2018

Austrian 1/10 Electric Off-road Nats Rd5 – Report

The fifth and final round of the Austrian Electric Off-road Nationals was held at the MRC-Traiskirchen club close to Vienna. The track underwent a major redesign with the former dirt track now being laid out with astroturf. However the natural contours have been preserved to ensure an off-road feeling, making the track very technical. Classes run were 2WD Buggy, 4WD Buggy and 2WD Truck and it was Team Associated’s Peter Pinisch who took the overall TQs in all categories. In the 2WD A-main 2WD there were tough but fair fights between Peter Pinisch and Yokomo driver, Lucas Grainer. In the end Peter would prevail to take the win from Lucas on the 2 spot. Yokomo’s Thomas Pumpler came in 3rd to round out the podium.

Continue reading the report here

October 3, 2018

Infinity IF15 front upper suspension shaft E-ring type

Having just claimed the 2018 Euro Nitro Series title with Jilles Groskamp, Infinity has released a new front upper suspension shaft for its IF15 200mm nitro touring car. With firm fixing both ends of the shaft, an E-ring one end and a stopper on the opposite end, the new shaft is designed to give added security against vibrations during long finals. Also added to the Infinity parts line-up are vivid red anodised aluminium washer sets (3mm inner diameter), which, if used in combination with the black versions can help easily distinguish a driver’s set-up. Supplied in packs of 10, they are available in 0.5, 1, 2 and 3mm thicknesses.

View more images here

October 3, 2018

Tamiya TT-02RR 4WD on-road chassis kit

Coming this December is Tamiya’s new TT-02RR 4WD on-road chassis kit. The race-worthy variant of the company’s popular entry-level chassis comes equipped with a host of performance-enhancing parts such as a blue hard-compound tub chassis, adjustable caster and oil-filled CVA shock absorbers. Also included are an aluminium centre driveshafts and rear aluminium uprights.

Source: Tamiya [tamiya.com]

October 3, 2018

RC Mission T4 rear hub upper blocks

Coming from RC Mission and made for the Xray T4 series of electric touring cars are the rear hub upper blocks, clever alloy caps that prevent the ball studs from breaking the hub in the event of a crash. The caps are machined from aluminium and they fit on top of the rear hubs, reinforcing the whole assembly and ensuring less stress on the single ball stud mounting position as the spare hole is filled with a grub screw. The caps can be flipped to use either the inner or outer ball stud mounting position and they are available as 2mm or 4mm variant, the latter resembling a setup with additional ball stud spacers.

View more images here

October 3, 2018

Trinity universal brushless motor bearing tool

Trinity have introduced their universal brushless motor bearing installation tool. It works with all brushless motors and allows for easy removal and installation of motor bearings. Included with the tool, that is made of quality aluminium, come all necessary adapters and sleeves.

Source: Trinity [teamtrinity.com]