Red RC » P Off Road

November 1, 2014

JConcepts TLR 22 & 22-4 Fin titanium turnbuckle sets

JConcepts introduction the Fin turnbuckle sets for the Team Losi Racing 22 2.0 and 22-4 buggies. The base of the shafts’ design is centred around a .143″ titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts the TLR HD ball-cups. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the centre. The turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation.

Click here to view more photos

October 31, 2014

Fast Race 1/8th buggy tyre cutter

From Fast Race and made to cut 1/8th buggy tyres off their wheel is this tyre cut device. The simple yet clever tool is usable with most of today’s 1/8th rims, made of sturdy aluminium and it makes re-using rims easier. An adjustable holder takes a standard scalpel blade so no unusual blades are needed once they need to be replaced. Using the device is pretty simply as you can see from the video that can be found after the break. The tyre cutter will become available by beginning of November.

Click here to view a video of the tyre cutter in action

October 31, 2014

Oscar Baldo wins at Levante regional champs Rd1

The first round of the Levante regional championship was held in Alicante, Spain with more than 60 drivers in attendance. The A-main saw Xray’s Ignacio Candel chase Mugen driver Oscar Baldo hard for the whole race but at the end Oscar took the win with Ignacio in 2nd. Jose Tomar Escudero (Bergonzoni) rounded out the podium in 3rd place.

Source: Xray [teamxray.com]

October 31, 2014

Active Hobby Products WR-02 alloy motor guard

Active Hobby Products WR-02 alloy motor guard-1

Coming from Active Hobby Products and made for Tamiya’s WR-02 2WD wheeler chassis is an aluminium motor guard set. Included is a machined motor guard with numerous slots for cooling and weight reduction as well as all needed mounting hardware. The assembly protects the somewhat exposed motor of the WR-02 chassis during on-road and off-road abuse while adding a bit of visual impact at the same time. The set is available in four colours including blue, black, red and silver.

Click here to view more photos

October 30, 2014

Xray XB8 steering knuckle brass adjusting nut

Xray now have a brass adjusting nut for the steering knuckles of the XB8 buggy available. Made to capture the pivot balls of the steering assembly the nut is three times heavier than the stock part and made to fine-tune the handling characteristic of the buggy.

Source: Xray [teamxray.com]

October 30, 2014

Slovakia Cup Rd1 – Report

The 1st round of this Winter’s Slovakia Cup was held at the Hudy Arena in Trencin, Slovakia. Run in the six classes of Touring Car Modified and Stock, Formula, Pan Car as well as 2WD and 4WD Buggy the race attracted a good turnout of racers. In the Touring Car Modified class Martin Hudy soon set the benchmark with David Nemcek and local driver Tomas Liptak battling for 2nd and 3rd spot in qualifying. The triple finals were then again dominated by Martin with David coming in 2nd and Tomas rounding out the podium in 3rd.

Click here to continue reading the report

October 30, 2014

Vaterra 1986 Chevy K-5 Blazer Ascender RTR

Vaterra’s lifted 1986 Chevrolet K-5 Blazer Ascender kit is soon also available as an RTR variant including a Dynamite brushed crawler motor, waterproof speed controller and Spektrum DX2E transmitter. The vehicle is based on the Ascender chassis that features stamped steel ladder frames, metal gear transmission, an adjustable wheelbase and a long-travel suspension. The package is topped-off by a replica Blazer bodyshell and grippy scale tyres.

Click here to view more photos

October 30, 2014

SWorkz S350 series aluminium option parts

SWorkz have new aluminium option parts for the S350 series of 1/8th scale vehicles available. First up are rear hub carriers with various mounting positions for the upper camber links and the lower hinge pins. Coming as pair the hubs include reduction bushings for the ball bearings and they are gun metal anodised. The second new part is an upper steering bellcrank lever for the PSP system. Adding some visual impact the lever also increased the stability for improved steering input and precision. Last but not least are closed Pro Series wheel nuts. They not only look the part but also protect the wheel axle threads from the influence of dust, dirt and moisture. Again coming gun metal anodised they match the remainder of SWorkz’ alloy option parts.

Click here to view the other new parts