Red RC

June 21, 2018

Gmade BOM 1/10th 4WD trail truck

Gmade have released first information and images of their forthcoming BOM 1/10th scale 4WD trail truck. The kit builds on a scale-looking ladder frame constriction with stand-up front shock and laydown rear dampers that make way for the scale roll cage construction. The steering servo is located in the front part of the chassis and the steering assembly is of a zero-Ackermann design for maximised steering performance. Angled front king pins minimise the scrub radius for further increased steering efficiency. The heavy-duty threaded aluminium shock absorbers utilise 3.5mm shock shafts and the transmission, with all-metal internal gears, is of a torque twist reducing design. Optionally a 2-speed hi/lo transmission conversion will become available to add speed when needed. The kit is rounded out by grippy tyres, a cool looking body shell a couple of scale accessories.

View more images here

June 21, 2018

Double Ceramic ceramic motor bearings & lube

Double Ceramic from California have introduced their new ceramic motor bearings as well as their ceramic-infused bearing lube. The first product is focusing on reducing magnetic interference around the motor to maximise electric motor performance. The full ceramic 540 motor Bearing achieves this with the use of Zirconium Oxide balls and races, which has 80 percent less friction than bare chrome steel balls, while also being 40 percent lighter. This results in less centrifugal force on the balls and less heat generation between the balls and races. The bearing also uses a variation of Double Ceramic’s custom moulded PEEK cage, resulting in no magnetic interference in brushless motors, resulting in quicker spool-up and higher RPM. The Full Ceramic motor bearing also contains no shielding, further reducing friction and increasing high RPM capability.

Continue reading here

June 21, 2018

RC Aurora ARR V2 6200kV sensored brushless motor

PPM have introduced the new RC Aurora ARR V2 6200kV sensored brushless motor for 1/28 scale vehicles. The motor features a new can design that allows to use the power plant in an even wider range of cars such as the GLR, GLA, BZ and SZ kits. The V2 sports a single sensor port and easy to reach heavy duty solder tabs and it is available now, coming also in a 7000kV variant.

Source: PPM [ppm-rcracing.com]

June 21, 2018

Queensland State Titles – Report

The 2018 1/10 Off-Road Queensland State Titles were held at Sunshine Coast’s Valley Raceway in Queensland, Australia last weekend. The event titles saw drivers from the local clubs and some drivers from NSW come to race on the Valley Raceway track on a lovely Queensland winter weekend. The club had done some changes to their layout, adding some of the 1/8 track jumps to the 1/10 layout, providing some great racing over the weekend. With the slippery track 2WD Mod was always going to be about smooth driving, from early on it was going to be the battle between the Australian champ, Christopher Sturdy and the 2017 state champ Alex Bernadzik, Christopher Sturdy taking Q1, Q2 and Q4 to take out the TQ with Alex in 2nd and Mitchell Pratt in 3rd. A1 and A2 was all Christopher Sturdy taking the title over Alex Bernadzik with Mitchell Pratt in 3rd.

Continue reading the report here

June 20, 2018

ProTek 155 series high-voltage servos

ProTek RC have announced two powerful high-voltage, digital servos in the form of the 155T and 155S. They are usable for both 1/10th scale and 1/8th scale applications and feature precisely machined cases with deep, machined cuts in the lower cases that work as a heatsink to provide additional cooling. The 155T (0.08s/32.6kg-cm) and 155S (0.06s/26.6kg-cm) servos are ProTek’s first to feature a conformal coating – a thin layer of polymeric film that contours to the printed circuit board to protect against vibrations, moisture, dust, chemicals and extreme temperatures. Both servos operate from 4.8 to 7.4V, so they can easily handle high voltage input when conditions warrant maximum speed and torque. Other features include powerful coreless motors, metal gears and black receiver wires for that factory look.

View the 155T servo here

June 20, 2018

Josh Cyrul joins Capricorn

Capricorn have officially announced the signing of veteran U.S. on-road racer, Josh Cyrul to their US team. The multi-time US National Champion will use the Capricorn’s electric touring and pan car kits while also making a possible return to nitro racing, using the Italian-brand’s popular 1/8th and 1/10th IC platforms. Josh says:

Since the first time I saw a Capricorn car, I knew the quality, dedication and most importantly the passion for racing. I was super impressed and honestly jealous of the drivers I had to race against who were using Capricorn. For myself wanting a quality electric platform to work with and develop, plus the potential to return to nitro racing where I’ve had some of my greatest accomplishments in RC, this is absolutely a dream come true! Massive, massive thanks to Dwight Smith, Paolo Morganti and especially Patrizio Rossi for this opportunity!

Source: Capricorn [capricornrc.com]

June 20, 2018

JConcepts Truth 2 UTV Slash 2WD/4×4 body shell

Coming from JConcepts and made to outfit the Traxxas Slash 2WD and 4×4 short course trucks is the Truth 2 UTV body shell. The new shell draws an inspiration from Glamis, California, where peace of mind, relaxation and all-out performance pack the dunes each weekend. The T2 body was started as a clean slate design and sculpted with high-impact features, detailed front fascia and large angular wheel wells. The rigid design fits right into the line-up as the body shares styling cues from key family designs such as the Finnisher line of off-road racing bodies. The large surface roof and cage are profiled to ensure proper integration with the popular Slash and Slash 4×4 chassis. Inside clearance has been maximised for a vast assortment of inner features any customer might have installed. The body comes clear and including large footprint window masks and a detailed decal sheet.

View more images here

June 20, 2018

Mugen MTC1 Team Edition limited edition kit

Mugen Seiki Europe have introduced their new MTC1 Team Edition limited edition electric touring car kit. An exclusive to MSE, the kit includes a 1-piece carbon fibre top deck, an additional rear anti-roll bar wire, belt tensioner, lightweight wheel axles, aluminium spool outdrives as well as the optional floating battery mount, lightweight front upper arm turnbuckles and also the recently introduced soft shock and diff O-rings and the heavy duty diff internals kit. Also included are additional parts to recreate the latest setups as used by Mugen’s Robert Pietsch and Viljami Kutvonen. The kit is made solely for the European market and only available through the MSE dealer network.

Please note that the upper image of Robert Pietsch’s personal MTC1 is just for reference.

Source: Mugen Seiki [mugen.eu]