Coming from Radtec and made for the Xray T4 series of touring cars is a 51mm premium steel double joint driveshaft set. The shafts are made from ultra-hard spring steel for improved wear characteristics with the machined wheelshafts further improving precision. Included in the set, that adds to the already existing 50mm and 52mm shafts, are two 5x10x3mm high-grade ball bearings.
Source: Radtec [radtec-rc.com]
Destiny have announced the release of an aluminium main chassis plate for their new RX-10SR touring car. The item is machined from high-quality 7075-T6 aluminium and it comes with a dark surface coating for wear and looks. Furthermore the fully symmetrical chassis sports a Destiny logo on the bottom side for easy identification and it features chamfered edges to reduce chassis rubbing during cornering.
Source: Destiny [destinyracing.jp]
The Italian TLR Cup was held at the RC Landia facility in Scandiano, Italy this past weekend. In the 2WD class Davide Ongaro (Team Associated) and Giuseppe Fermi (Xray) battled for the overall TQ with the better end for Davide who would snatch the pole position for the triple A-mains in the end. Over in 4WD it was again Davide with the TQ, this time from Tekno RC’s Alex Zanchettin.
Continue reading the report here
Coming from ARC is the R8.1 2018 1/8th nitro on-road kit. The ’18 variant sports a couple of changes such as an updated front bulkhead that incorporates a belt tensioner to adjust the belt tension between the front bulkhead and middle layshaft for improved efficiency. Also new are several tuning parts that were optionals previously such as aluminium front downstop arms, 2.4mm and 2.6mm front as well as 2.6mm and 2.8mm rear anti-roll bar wires and also different-size 1st and 2nd gear spur gears. The package is rounded out by new shock springs and an X-hard clutch spring.
PSM from Germany have introduced a carbon fibre front upper deck for the Team Associated B64 buggy. This front upper deck was designed to reinforce the vehicles front end and will provide more traction along with smoother overall cornering. It comes with a flex-limiter system that can be used as an additional option to limit the torsion for advanced flex control.
Yeah Racing have introduced an aluminium gearbox protector for the Tamiya CC01 chassis. The part is machined from high-quality alloy, it comes blue anodised for looks and wear and attached directly to the lower side of the chassis. A machined chamfered edge adds visual impact to the part that makes for improved transmission protection and precision.
Source: Yeah Racing [yeahracing.com]
The Pan American race was held at Homestead RC Raceway in Florida this past weekend and in the 1/8th GT class it was Joaquin Desoto Jr. with the overall TQ, and the only 22-laps run in qualifying, from Lazaro Alonso and Paolo Morganti. In the hour-long A-main it was again Joaquin who prevailed as the took the win some two laps in front of Rino Lino with Fernando Mendez coming in 3rd to round out the podium. Elsewhere in the supporting 1/10th 200mm Nitro Sedan class it was DJ Apolaro with the TQ and DJ would also take the 1-hour A-main with a three laps margin from Paolo Morganti in 2nd and Joaquin Desoto Jr. in 3rd.
T-Works have announced the signing of Sweden’s David Ronnefalk to their factory team. The 2016 IFMAR 1/8th Buggy World Champion will be using T-Works accessories in all of his HB Racing vehicles and he has the following to say about the deal:
I’m very happy to be representing T-Works for 2018 and beyond. As I didn’t make any official announcement during 2017 it was time to do so now. I want to thank Mr. Wilson Woo for the opportunity to use his high quality accessories on all my HB Racing vehicles. The unique “UFO” screws look really cool and they are also very strong compared to many others I have tried. If you haven’t given them a try yet, I really recommend you to do and I’m sure you won’t be disappointed!
