February 23, 2018

Cragg TQs opening qualifying at Hudy Arena

Neil Cragg has TQ’ed the opening round of 2WD qualifying at the Euro Offroad Series in Slovakia. Only 7th fastest in practice, the Team Associated driver put in a faultless drive to top the times ahead of Martin Bayer after a late mistake from the top seed. Behind them, Kája Novotný recovered from a first lap error to complete the Top 3, his Xray posting the fastest lap of the opening qualifier.  For Michal Orlowski he too would have to recover from a costly mistake at the same place as Novotný, getting by Lee Martin in the final minute to open his qualifying with a P4.

Continue reading this report here or view our complete event coverage here.

February 23, 2018

Bayer tops 2WD seeding at EOS

Euro Offroad Series 2WD Championship points leader Martin Bayer has topped seeding for Round 3 at the Hudy Arena, the Xray fastest from team-mate Kája Novotný.  A former winner at his home event, Bayer had a clear advantage over an otherwise closely match field, his best 3-consecutive laps  of 1:13.601 almost a full second quicker than Novotný’s.  Behind the pre race favourite and Novotný, it was last year’s winner Michal Orlowski who was third quickest with Schumacher looking the best of the rest on Xray’s home turf as Joern Neumann posted the 5th fastest time.  Lee Martin set the fourth fastest time, the Yokomo driver unable to improve on his time from the first of the two counting timed practice rounds.  Coming into the event on the back of his first EOS victory last month, Team Associated’s Neil Cragg will be seeded 7th for qualifying, all four rounds taking place later today.

Continue reading this report here or view our complete event coverage here.

February 23, 2018

Fenix BD8 aluminium main chassis & top deck

Coming from Fenix and made for Yokomo’s popular BD8 touring car are an aluminium main chassis plate and top deck. As for the chassis, much thoughts went into in-corner scrub and drag reduction, which leads to more flowing outer lines as well as redesigned battery mounting brackets to further add clearance during hard cornering. The chassis comes with extensive machining in the battery and electric area for optimised flex characteristics, a black coated surface and machined silver edge details. As for the top deck, extra clearance is provided in the pinion area to ensure proper fitting of large pinions when running high-wind stock motors. Both the chassis and top deck will fit the 2018 and 2017 BD8 kits.

View more images here

February 23, 2018

Xpress Xpresso anti-roll bar sets

Xpress have introduced two anti-roll bar sets for the Xpresso 1/10th scale M-class cars. Available as separate kits for the front or the rear of the car, each includes specific swaybar wires for the K1 and M1 variants as well as all needed mounting material including ball cups and ball studs, red anodised alloy stoppers, ball ends and turnbuckles.

View more images here

February 23, 2018

7075.it MP9 TKI4 Mk3 WT main chassis plate

7075 Special Parts from Italy have introduced their new Mk3 WT aluminium chassis for the Kyosho MP9 TKI4 buggy. The part is machined from aircraft-grade 7075 aluminium and it is of an updated design that allows to attach 7075’s new 30g WT rear chassis weight for improved driveablilty in various track conditions. The chassis has also been optimised for the use with the latest TKI4 suspension arm version and it sports an enlarged motor pocket to allow a wider range of engines to be fitted. The hard-anodised surface ensures less wear in abrasive track conditions and the chassis is available now.

View more images here

February 23, 2018

Yeah Racing release new TA-02 & YD-2S option parts

Coming from Yeah Racing are new option parts for the Tamiya TA-02 and Yokomo YD-2S on-road kits. First up is a carbon fibre upgrade set for the Tamiya TA-02 and TA-02SW 1/10th 4WD on-road kits that includes a lower carbon fibre chassis plate, a matching upper deck as well as front and rear shock towers. The conversion will lead to a lighter and stronger chassis assembly while adding visual impact at the same time.

Continue reading here

February 23, 2018

Kyosho RB6 carbon composite bulkhead & upper plate

Kyosho have introduced theRB6 buggy’s front upper bulkhead and upper plate in a new carbon-reinforced composite material. The parts will flex less than the standard items, for a more linear and precise steering feeling on various surfaces, with the effect fully unfolding on high to very high bite tracks. The parts are available separately and they are usable for the latest RB6.6 buggy as well as the older spec RB6, the RT6 stadium truck and SC6 short course truck.

View the upper plate here

Tonisport
Mibosport
LC Racing
VP Racing
T-Works