Red RC

July 17, 2017

Ryan Cavalieri doubles at Hot Rod Hobbies Shootout

The 20th Annual Hot Rod Hobbies Shootout was held this past weekend at Hot Rod Hobbies and Raceways in Santa Clarita, California. Historically the event attracts the top teams and drivers from around the U.S. with the 2017 edition making no exception. The event was held in the usual mix of Modified and Stock off-road classes and in the premier 2WD Modified Buggy category it was Xray’s Ty Tessmann who took the TQ after the qualifiers and he would also come out on top of the field in the opening A-main but A2 and A3 belonged to Ryan Cavalieri (Team Associated), coming from the 4 spot on the grid, after the wind played havoc on the drivers. With a constant performance Team Associated’s Spencer Rivkin, who started from 3rd on the grid, obtained the runner-up spot while TQ holder Ty Tessmann had to settle for 3rd overall. Jared Tebo (Kyosho) in 4th and Dustin Evans (Team Associated) completed the top 5 result.

Continue reading the report here

July 17, 2017

T-Works 7mm & 5mm short nut drivers

Coming from T-Works are two short nut drivers in 7mm and 5mm specification. Both are made of high-quality aluminium and they come black anodised and with silver edge details for looks. The 7mm variant, made for the M4 wheel nuts of 1/10th scale vehicles, features additional holes for screw driver blades that can help to crank even tightly fitted nuts while the 5mm variant is usable for the M3 nuts used to hold pistons and other parts on RC vehicles.

View more images here

July 17, 2017

Kum Yew wins 4WD Buggy class at NOOB Rd5

The recent fifth round of the NOOB racing series saw Xray’s Kum Yew walking away with the win in the 4WD Buggy class ahead of Kamen Koh (Serpent) and Mark Lim (PR). In the opening A-main, pole-sitter Kum made a mistake in the early stages which cost him the lead. Mark took over the 1st spot with Kamen in 2nd. A technical gremlin however saw Mark surrender the lead, leaving Kamen and Kum Yew to battle it out, eventually resulting in Kum Yew taking the win. In the second leg, Kum Yew took the race win from start to finish to secure the overall win. In the final leg, Kamen and Mark battled it out, with Mark taking A3 after a mistake from Kamen.

Source: Xray [teamxray.com]

July 17, 2017

Agama A215 aluminium lower servo saver

UK Agama distributors Nemo Racing have introduced an aluminium lower servo saver for the A215 kits. The part is designed to increase the efficiency and durability of the servo saver and it comes machined from high-quality aluminium and hard-coated for looks and wear. The part will hit stores very soon.

Source: Nemo Racing [nemoracing.com]

July 17, 2017

Sugiura wins Invitational class at Kyosho Masters Japan

The 14th Kyosho Masters Japan were held this past weekend at the RC Land Taki track in Chiba with about 70 entries from Vietnam, South Korea, Malaysia and Japan. The 2-day event was held in Invitational, Expert and Sports classes and in the premier Invitational class it was Yusuke Sigiura who walked away with the win from Wataru Takashiro in 2nd. In 3rd Dani Choi would round out the top 3 podium result.

Image: Yusuke Sugiura

July 17, 2017

Yeah Racing T4 & general touring brass weight sets

Coming from Yeah Racing are two brass balance weight sets, one for Xray’s T4 line of touring cars as well as a general set. Starting without the Xray-specific set, the kit contains a total of eight weights with two dedicated ones for the centre line of the car while the additional six weights can be positioned in the steering and rear chassis area. The flat 8g and 13g weights that are part of the T4 set are also available as general 6-piece kit usable for nearly all touring and drift cars. The weights are machined from high-quality brass material, they come with a black surface coat and are engraved for easy identification.

View the 6-piece set here

July 15, 2017

TPro M4x10mm downstop screws

Coming from TPro is a set of downstop screws for 1/8th off-road vehicles. Specially designed with a flat head that better protects the chassis area compared to a normal set screw, that can grub into the chassis plate over time, the construction also makes for more precise droop settings thanks to the increased contact patch. The set includes eight M4x10mm screws that are usable on many of today’s 1/8th buggies, trucks and GT kits.

View another image here

July 14, 2017

LRP Pulsar Sport AC/DC charger

LRP’s Pulsar Sport AC/DC charger is the company’s latest offering out of their popular Pulsar charger line. The smaller brother of the Pulsar Pro offers up to 6A of charge current to fill up to 6S LiXX packs or up to 15 cell NiXX batteries fast and conveniently. A dedicated LiHV program allows to make use of the latest generation of Lithium-Polymer cells and an integrated power supply does away with the need for an external power source. The package is rounded out by a backlit display, a 5V/1A USB port as well as an integrated balancer with XHR port.

View the specifications here