Red RC

July 25, 2017

Simon Moss teams up with Serpent

Serpent have announced the signing of UK’s Simon Moss to their 1/10th scale off-road team. Simon will be working closely with Serpent’s design team as well as UK distributor Tony Evdoka and he has the following to say:

Today I am delighted to announce joining the Serpent Off Road team. I can’t thank Tony Evdoka, Ronald & Michael at Serpent enough for giving me the opportunity to represent this great brand and continue to build their presence in the 1/10th Off Road market. I am truly excited about this and look forward to continue development of our off road platforms together and be a real presence at the sharp end of the UK 1/10th scene.

Source: Serpent [serpent.com]

July 25, 2017

T-Works 6.5″ 1/10th buggy rear wing sets

T-Works have introduced two new 6.5″ wide 1/10th buggy rear wings. Available as flat and hump-type variant, both are moulded using lightweight polycarbonate, they feature triple gurney cut lines and raised side dams to make way for the rear tyres during suspension compression. The wings come clear and in sets of two each.

View the hump-type wing here

July 25, 2017

Traxxas 4-Tec 2.0 brushless & brushed chassis sets

Traxxas’ new 4-Tec 2.0 1/10th scale 4WD car is soon also available in two additional variants without body shell. Coming as brushless-powered VXL and brushed standard variant, both make use of the same modular chassis, strong suspension and drivetrain components and they also include a 2.4GHz TQ radio system. Included with the VXL set is a Velineon VXL-3s electronic speed control, a Velineon 3500 brushless motor as well as Traxxas’s TSM stability management. A one-piece steel driveshaft and adjustable steel turnbuckles and steering links round out the upgraded package. The standard brushed variant comes with the XL-5 speedo, a Titan 12-Turn 550-class motor, alloy centre driveshaft and rigid composite steering links and turnbuckles. The cars can accommodate most of today’s 200mm touring car and GT body shells and they will hit stores very soon.

View more images here

July 25, 2017

T-Works release full line of B64 option parts

T-Works have released a full line of option parts for Team Associated’s B64 1/10th 4WD off-road buggy. First up is a carbon fibre battery strap. Machined from high-quality graphite material the part is of an adjustable design that allows to shift the shorty battery pack forth and back in order to fine-tune the buggy’s weight bias. Included with the strap comes suitable hardware.

Continue reading here

July 25, 2017

Swiss McBest Cup Rd5 & Rd6 – Report

Round 5 and 6 of the Swiss McBest Cup were recently held in Herblingen. Run with “hand-out” engines and fuel the qualification format is also special as the 7-minute qualifiers have a mandatory pit stop. Round 5, run on Saturday saw Xray’s Martin Wenger coming out on top in the 1/8th class from Shepherd racer Stefan Graber 2nd and Nick Zünd 3rd.

Continue reading the report here

July 25, 2017

RC Maker Awesomatix LS1/LS2 Ackermann plates

New from RC Maker are graphite Ackermann plates for the LS1 and LS2 steering racks. Coming in a set of three and including 1mm, 1.5mm and 2mm plates, they make adjusting the steering Ackermann a lot easier and faster. Drivers only need to undo the ball-studs on the steering plate enough to slide the shims in, then re-tighten. The plates are ultra-lightweight and durable, and allow 1mm to 4.5mm of Ackermann adjustment overall.

View another image here

July 25, 2017

Duratrax Punch & Six Pack 1/8th buggy tyres

Duratrax have introduced their new Punch and Six Pack 1/8th buggy tyres. The Punch is ideal for loose, hard-packed wet and damp clay tracks while the Six Pack tread works on pavement, grass and hard-packed dry tracks. All are available unmounted or mounted on white dish, black spoke or black chrome spoke wheels in soft C2 compound and including suitable foam inserts.

View more images here

July 25, 2017

Arrowmax 20mm chassis droop gauge

Coming from Arrowmax is their new -3mm to 10mm droop gauge for 1/8th and 1/10th vehicles. Designed for the use in combination with 20mm chassis blocks the CNC-machined alloy gauge comes black anodised and with the company’s signature golden anodised details.

Source: Arrowmax [arrowmax-rc.com]