The opening round of the Austrian 1/8th Electric Off-road Nationals was held this past weekend and it was Rene Kargl (SWorkz, Hobbywing, Pro-Line) who walked away with the win. Winner of round 1 of the nitro off-road nationals, Jürgen Trieb (SWorkz, Nosram, TPRO) came in 2nd while Andreas Mayr (Mugen, Tekin, Pro-Line) would round out the podium in 3rd.
Source: MW RC Cars [mwrccars.at]
Austrian Picco distributors MW RC Cars have announced the addition of multiple Austrian national champion, Dominic Bauer to their team. Dominic will use the Italian engines in his 1/8th nitro off-road campaign and he has the following to say:
Reliability and Power and driveability, made my decision easy, to trust in Picco engines.
Source: MW RC Cars [mwrccars.at]
Italian company BMT have introduced a set of hard belt pulleys for the 701 on-road kit. Made from an orange colour composite material and harder than the stock parts, the items are best used in high temperature conditions and when the traction is high. Included are also differential cases with all parts are also being available separately.
Source: BMT [bmt-team.com]
Coming soon from Schelle Racing Innovations are aluminium rear hubs for the Team Associated B64 1/10th scale buggies. The 2-piece design with replaceable caps increases adjustment and durability as the hubs fit the kit axle height inserts for 0, +1, +2, and +3 adjustability. The standard location “inside, +1mm shim” matches the kit standard upper row middle “B” hole. The upper cap design can space away from the main hub with ballstud shims, allowing racers fine in-between adjustments for the rear upper link. True to the kit geometry, the Schelle aluminium hubs are 0 degree toe-in when using the Associated inserts. The SCH1095 aluminium upper caps carry over from the B6 design, and are shared the same part left and right. The upper cap design reduces leverage on the outer ballstud, and is much easier to use when needing to remove a broken ballstud. Lastly, these hubs are zero slop, with plastic bearing inserts and 2 set screws for the hinge pin. The hubs will become available from end of May in blue or black colour.
Traxxas makes tackling sand and snow, or even hydroplaning on water easy with the introduction of a range of pre-glued paddle tyres. The all-new lineup features strong scoops combined with strengthening ribs and TSM-rated glue joints to provide a whole new dimension in traction and off road fun. All tyres are sold in pairs and are pre-glued on genuine Traxxas wheels to make it fast and easy to get going. They are available for X-Maxx, Revo and Maxx trucks, Slash, Rustler, and Stampede models.
Protoform have introduced new Pro-Lite variants of their successful AMR-12, Strakka-12, BMR-12 and BMR-12.1 1/12th scale body shells as well as a regular weight variant of the Swift-235 Pro10 lid. The 1/12th bodies are made of genuine Lexan polycarbonate material and due to they very low weight they are recommended for the expert racer who is in search of the very last bit of performance. The Swift-235 body for 235mm wide Pro10 cars is moulded from 0.030″ Lexan and due to its higher stiffness and weight it is recommended for outdoor modified racing.
Club Circuit Téléguidé St-Hyacinthe in Quebec, Canada help its 3rd Annual Quebec Onroad Nationals with 65 racers and 135 entries coming from across Canada and the US, making it the second biggest event in Canada. Competition was very close and the changing track condition made it very challenging to stay on top, there were top notch drivers competing in each main who showed a high level of sportsmanship. In the premier Modified Sedan class it was Team Associated’s Keven Hebert who took the TQ and win from AE teammates Alex Fournier and Adam Hutchison.
Coming from Avid are aluminium rear hub spacers for the Mugen MBX7 and Team Associated RC8B3 as well as domed droop screws for 1/8th scale vehicles. Starting with the rear hub spacers, the parts are machined from 6061-T6 aluminium and they are specially designed to remove all the slop from the rear hubs while providing strength. The spacers are available in grey colour for the Mugen MBX7 series of buggies, trucks and cars and in black colour for Team Associated’s 3rd generation RC8 kits.
