Red RC

May 9, 2017

Reds Racing VX 540 17.5T high torque brushless motor

Coming from Reds Racing is the new VX540 17.5T high torque electric brushless motor. Complementing the already existing 13.5T and 21.5T high torque variants, the motor offers a precision-machined 6061-T6 high airflow can, a balanced sintered rotor as well as low resistance solder tabs. The specially tuned motor will offer increased low-RPM torque while maintaining unchanged top speed, making it ideal for tracks that requires both lots of bottom end power and speed.

Source: Reds Racing [reds-racing.com]

May 9, 2017

SkyRC D100 V2 AC/DC multi-chemistry charger

SkyRC have introduced their new D100 V2 AC/DC multi-chemistry charger. The device offers dual output channels, a USB output, and a 13.8V 100 watts power supply, making it usable with up to 6S LiXX batteries or up to 15-cell NiXX packs. With its internal power supply the charger is able to power additional DC devices while Bluetooth 4.0 connectivity allows to remote control and monitor the charger using iOS or Android mobile devices. Another new feature to the D100 V2 is the Scan to Go function. With a QR code generated by SkyRC’s SkyCharger app and attached to the respective battery the charger will start charging or discharging automatically once the QR code is scanned with a mobile device. The function will prevent the use of wrong charge modes or parameters. The features are rounded out by a back-lit display and temperature-controlled fan units.

View the specifications here

May 9, 2017

Arrowmax 5.5mm & 7.0mm 2-piece nut driver set

Coming from Arrowmax is a 2-piece set of nut drivers, containing both 5.5mm and 7.0mm tools. The nut drivers sport the company’s signature black and golden honeycomb handles for cool looks and minimal weight while the 100mm tool tips feature a gold-colour titanium-nitride surface coating for wear and corrosion-resistance.

Source: Arrowmax [arrowmax-rc.com]

May 9, 2017

Kyle Branson successful at BRCA 200mm Nats Rd2

The second round of the BRCA 1/10th IC circuit championship was held at the Halifax track. In qualifying it was Capricorn’s Kyle Branson who managed to take the TQ and set a new track record ahead of Joe Kerry, followed by Alex Thurston in 3rd and Mark Green in 4th. The final got under way with Kyle managing to pull a gap early on from Mark, who managed to get into 2nd in the opening laps. A great battle was going on from around the 10 minute mark with Alex and Mark fighting for the 2nd spot for almost the remainder of the race. After 30 minutes it was Kyle who took the win with his Capricorn car nearly two laps ahead of the two Serpents of Mark in 2nd and Alex in 3rd.

Source: Capricorn [capricornrc.com]

May 9, 2017

Ofir Avitan wins at Israeli League Rd8

Round 8 of the 1/8th Nitro Buggy Israeli League was held at the Omer Ring track in fantastic weather conditions. After the four rounds of qualifying it was Ido Carmon to take the TQ honours. At the start of the 40-minutes main final Ido was not able to take profit of his pole position as he had a bad start which dropped him down the field. This allowed Yaniv Sivan, who came from the 2 spot on the grid, to take over the lead and to open a gap on the field. It wasn’t for long though as a few mishaps and a flame out promoted Ofir Avitan into the lead. However Yaniv managed to recover and to hold onto the 2nd position while Ido Carmon had fuel flame out which he could not recover from. Meanwhile there was a battle between Aviv Maymon and Or Balulu for 3rd. Aviv had some issues and lost valuable time which promoted Or Balulu into 3rd as Asi Bitton and Gil Harush were in the fight for the 4th place. Ultimately Gil Harush had the upper hand but up front Ofir Avitan would walk away with the win from Yaniv Sivan in 2nd and Or Balulu 3rd.

View the final results here

May 9, 2017

RPM DEX8T & Kraton rear A-arms

Coming from RPM and made for the Team Durango DEX8T and Arrma Kraton line of off-road trucks are rear A-arms and mud guards. Starting with the A-arms, the parts are moulded from RPM’s renown nylon compound for rigidity while the design also eliminates slop as the parts reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings. The next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower centre of gravity. This second shock mount matches the additional shock mount hole on RPM’s DEX8T/Arrma front A-arms. On top of this the arms are about ten percent lighter while also allowing to attach RPM’s optional mud guards. The arms are sold in pairs, they replace the stock Arrma AR330249 and stock Team Durango TD330707 parts and Team Durango’s stock mud guards are not compatible with these A-arms.

Continue reading here

May 9, 2017

LRP tease X22 540-size brushless motors

LRP have released first information on their forthcoming X22 electric brushless motors. Follow-up model of the successful X20 series, that has won three World Championships, multiple European and National as well as ETS and EOS titles, the motors will sport an updated, ultra-lightweight and precision machined 7075-T6 aluminium housing with maximised cut-outs and additional openings on the flat parts to further increase the cooling surface and lower the running temperatures due to improved airflow even at maximum loads. The most noticeable change has been made at the surface of the housing. The X22 comes with the “dark shine black” anodising with X22 engraving that will make it stand out in every chassis.

Continue reading here

May 9, 2017

Exotek introduce new B6 & B64 alloy option parts

Coming from Exotek are new aluminium option parts for the Team Associated B6 and B64 off-road kits. First up is an aluminium front camber mount for the B6 and B6D. The heavy duty 7075 alloy bulkhead is intricately machined to reduce its weight to only 15 grams, which is only four grams more than stock, while insuring its heavy duty construction. The part maintains stock geometry and it is available in polished factory blue or black.

Continue reading here