Red RC

May 2, 2017

Rob Janssen wins at Dutch EP On-road Nationals Rd1

Round 1 of the Dutch Electric On-road National Championship was held at the HFCC Racing Club in Den Haag. The tight low-grip track was a bit of a challenge for most drivers but come Sunday the grip level raised, making for some good racing. The fight for the win in A1 was on between Robert Krens and Rob Janssen. In the final stages of the leg Robert, who was in the lead, made a small mistake, allowing Rob to pass and to bring home the win.

Continue reading the report here

May 2, 2017

ABC Hobby Gambado 2017 1/10th M-size FWD car kit

Japanese company ABC Hobby have introduced the 2017 version of their popular Gambado 1/10th M-size FWD car kit. Based off of the previous version the 2017 variant features redesigned aluminium steering knuckles, new 3mm carbon fibre upper suspension plates with stabiliser mounts as well as a new aluminium rear suspension brace for improved overall rigidity. The chassis accepts 208mm to 210mm wheelbase body shells and it will hit stores soon.

View more images here

May 2, 2017

Tamiya TT-02D Mazda RX-7 FD3S 1/10th drift car kit

Coming from Tamiya is the Mazda RX-7 FD3S drift car kit on the proved TT-02D 4WD chassis. Made for entry-level drifting or as a base for further customising, the shaft-driven car features a clear, highly detailed RX-7 body shell, it comes with multi-spoke chrome rims, special drift tyres and the kit will hit stores in early July.

Source: Tamiya [tamiya.com]

May 2, 2017

Patrick Hofer wins Swiss 1/8th Buggy Nats Rd1

The opening round of the Swiss 1/8th Off-road National Championship was held this past weekend. In the Expert class Patrick Hofer would bring home the win in the 45-minute main final one lap ahead of Team Associated teammate Robby Lüber while Jeremy Pitted (HB Racing) ended the race in 3rd, some eight seconds short of Ronny’s time.

Source: Team Associated [facebook.com]

May 2, 2017

Kyosho Inferno GT3 1/8th nitro on-road kit

Kyosho have released first information on their forthcoming Inferno GT3 1/8th nitro on-road kit. Developed for the ever growing 1/8th GT class, the vehicle is based off of the successful Inferno MP9 TKI4 off-road platform and it is the follow-up model to the long-running and ageing GT2 kit. The kit will feature aluminium big bore shock absorbers and alloy shock stays for improved handling while significantly lighter differential make for quicker acceleration and improved mileage. The suspension components are understood to be taken over from the TKI4 as well while the proven 2-speed gearbox is a reminiscence to the GT2. Also new is a large yet light bumper assembly while the body mounts allow for forward or rearward mounting positions. All that is attached to a redesigned chassis with optimise flex characteristics and weight distribution. The car can be outfitted with select MP9-series option parts and it will hit stores in July.

View the features and more images here

May 2, 2017

Apandi doubles at Singapore Astro Buggy Champs Rd4

The fourth round of Singapore’s Urban Astro Buggy Championships was held this past weekend, and once again the race was concurrently a Singapore national series points scoring event. With the weather being sunny, the dry high traction astro surface at the Urban PlaySpace Raceway in downtown Singapore proved to be a challenge for the racers to master. In the 2WD Buggy Class, Esmail Apandi (Xray) took the TQ honours by winning rounds 1 and 2 of the three rounds of qualifying. It was the same story in the finals, with Esmail securing an early overall win by taking legs 1 and 2 of the A-Main. Dennis Chiang (Xray), who started 4th on the grid, secured the win in leg 3 to finish 2nd overall, while Kamen Koh (Serpent) took the final podium spot in 3rd.

Continue reading the report here

May 2, 2017

THR B6 under LiPo weight, bulkhead shims & thumb nuts

UK brand THR has introduced three new option parts for the Team Associated B6 series of 2WD buggies. First up is a tuneable under LiPo weight that allows for easy and swift weight gain in a 40g to 70g range by simply removing or adding three separate weight inserts. Cut from stainless steel the weight measured an overall 53x87x2mm and it is a drop-fit for the B6’s battery compartment. While adding or removing weight, the design also makes weight bias adjustments easy courtesy of the placement of the inserts within the frame. The weight can also be used in the Yokomo YZ-2 buggy with a special version for the Schumacher Cougar KD and KC being in the making too.

Continue reading here

May 1, 2017

Reflex Racing RSD TC7.1 aluminium flex chassis

Reflex Racing’s all-new RSD TC7-1 flex chassis for the Team Associated TC7.1 has been optimised to provide better flex for a broader range of adjustment. Designed to be used for asphalt and carpet the main plate is cut from genuine Thyssen Krupp 7075-T6 aluminium and it provides an easier to drive car in high-grip and hot temperature asphalt racing conditions while also increasing rotation on high-grip carpet tracks for more corner speed and quicker lap times. Included in the kit are carbon fibre battery locators which replace the original ones.

View more images here