Red RC

April 11, 2017

Tamiya M-07 Concept chassis kit – Coming soon

Tamiya have officially announced the forthcoming release of the all-new M-07 M-chassis kit. Although there are still no images available, Tamiya USA have released information on all features of the kit that was designed by the same designer who brought the TA-07 Pro Touring Car Chassis to life. The chassis takes a number of design cues from Tamiya’s touring car models and features a largely changed design from its numeric predecessors. The goal set forth with this new platform; ease of maintenance and responsive drive characteristics, all of which were attained during its development. The kit is set for a release at the end of June and it will be accompanied by 13 hop-up parts that will become available at that time too.

View lists of the feature and available option parts here

April 11, 2017

Schumacher CAT K2 wide rear pivot conversion

Coming from Schumacher and made for the CAT K2 buggy is the wide rear pivot conversion kit. The set is best used on high-grip astro and carpet tracks with Schumacher’s factory team having found out the wider pivot to improve landing performance and overall agility on direction changes. The conversion only increases the pivot width and does not increase the track width of the buggy. Included are a new shock tower, suspension mounts and wheel hex adapters.

Source: Schumacher [racing-cars.com]

April 11, 2017

Michael Ivo takes Danish 1/12th Modified title

The final round of the Danish DASU Electric On-road National indoor series was held in Tolloses. The bumpy track made things a bit unpleasant for the 1/12th scale drivers and after ending the day on the runner-up spot, following some issues with said track, Michael Ivo would take the overall title championship title.

Source: Xray [teamxray.com]

April 11, 2017

Xray 48 pitch moulded offset spur gears

Xray have introduced three new 48 pitch moulded composite offset spur gears. Designed for the T4 series of touring cars, the gears are precision moulded using a hard composite material for efficiency and durability, they are of a lightweight design and come in the three sizes of 72T, 76T or 79T.

Source: Xray [teamxray.com]

April 11, 2017

Lutz & Bornhorst sweep 10th Annual Psycho Nitro Blast

After 10 years, the Psycho Nitro Blast has built itself to become one of the most recognizable racing events in the United States. From its 24hr practice schedule to the massive 900+ entries, make for an event that is profoundly unforgettable and an experience like no other. Known to have one of the craziest layouts hosted in a massive arena, the stories have been legendary and the dedication to participate in such an event is enormous. Not only did the 2017 PNB test the drivers, but also their equipment’s durability as the grueling condition was relentless on all fronts. This past weekend in White Pine, Tennesse, the 10th Annual PNBlast drew in some of the biggest names in the game to compete on a jaw-dropping, massive track featuring perhaps one of the longest jumps in 1/8th off-road racing known as the Dragon’s Tail. This triple was 60ft long from tip to tip and took the lives of many 1/8th scale buggies and truggies along with it.

Continue reading the report here

April 11, 2017

HB Racing D8 series front arm B mounts

HB Racing have introduced new front arm B mounts for the D8 series of off-road vehicles such as the D817, D817T and E817. The B – or FR – mounts allow racers to fine-tune the front kick-up and roll centre of the vehicle as the suspension hanger controls the location of the rearmost end of the front suspension hinge pins. The mounts are available as +0.0mm, +1.4mm, and +2.8mm variant with the higher numbers equal a smother and easier to drive vehicle when the grip is high. The mounts come machined from aluminium, with a black coated surface and they also fit the D815 and D812 kits.

View the 2.8mm mount here

April 11, 2017

Yokomo Racing Performer 1/10th buggy shock springs

New from Yokomo are the Racing Performer shock springs for 1/10th off-road buggies. Aimed at racing on high-grip tracks such as carpet and astro turf the springs differ from the Yatabe springs by the material used and also manufacturing process, giving a different feels especially on jumps and when the going gets tough. The colour-coded springs become available by mid-April in five different front and three different rear hardnesses.

Source: Yokomo [teamyokomo.com]

April 11, 2017

Bowie Ginting wins at Jakarta EP On-road regionals Rd2

The second round of Jakarta Electric On-road regionals was held at Sunter International Speedway, Jakarta. A clear sky made and hot weather made for sizzling track temperatures and overheating tyres towards the end of the 5-minute runs. The opening qualifier of the Touring class was won by Bowie Ginting after a mistake of Suwardi Suliandy while in Q2 Bowie cruised to a comfortable win, some four seconds in front of Suwardi and Christian Mamesah. For Q3 traction decreased and Bowie rolled his car on the first lap. He decided to pull out, making way for Ronny Suwarto who then snatched the TQ and the P2 spot on the grid.

Continue reading here