Red RC

October 6, 2016

Traugott Schär crowned Swiss 200mm National Champ

The sixth and final round of the Swiss 1/10th 200mm Nitro Touring Championship was held in Sitterdorf. Going into the final round it was Raphael Wicki who lead the championship with Traugott Schär also having the chance to take the overall title. Unfortunately the weather had different plans than to offer the pilots a nice weekend of racing and so the first three qualifiers were held on a wet track with Q4 being the only one to be run on a dry track. Michael Schäfer would take a maiden TQ in a National Championship race in front of Raphael Wicki. Traugott Schär came in third from nitro newbee Oliver Krähemann.

Continue reading here

October 6, 2016

T-Works hard-coated aluminium touring car drive axles

Coming from T-Works and made for the Yokomo BD, Xray T4 and HB Racing Pro5 touring cars are hard-coated aluminium drive axles. The shafts are machined from high-quality 7075-T6 aluminium and they sport multiple mounting holes for the CVA cross pin to allow the usage of a new set of holes once the currently in use starts to wear out. A hard-coating makes for improved durability and included with the set come shims, cross pins and cross pin retaining rings. The wheel axles are available as variant for the Yokomo and Xray cars as well as a HB Racing specific set.

View more images here

October 6, 2016

Tebo opens Day 2 with TQ run

Jared Tebo has opened the second day of qualifying at the 1:8 Offroad World Championships with a TQ run, the Kyosho driver maintaining the Japanese manufacturer’s reign at the RC Tracks of Las Vegas. Opening qualifying with a P2 behind team-mate Elliott Boots in Q1 and then a P7 in the second round, the former Worlds Top Qualifier would top the times in Q3 by 3.5-seconds from reigning World Champion Ty Tessmann. Posting his first Top 3 run, Dakotah Phend, who runs in the same heat as Tessmann, would complete the Top 3 ahead of relative unknown Tomi Salonen, the Finnish driver having set his impressive time in the second heat of the reshuffled running order. Having dominated yesterday’s action TQ’ing both rounds, Boots’ third run would contain a number of mistake that would leave the European Champion with a P7.

Continue reading this report here or view our full event coverage here.

October 5, 2016

Philip Leung wins at TRC racing track GT series

The recent GT series race held at the Hong Kong based TRC racing track saw Philip Leung walking away with the win in the main final. Philip took the pole position for the A-main and right from the start he never looked back to take the victory with his Tesla-powered Mugen ride.

Source: Capricorn [carpricornrc.com]

October 5, 2016

Xray Racing Series Poland – Announcement

The opening round of the Xray Racing Series Poland will be held on the 29th and 30th of October in Lodz, Poland. Classes run will be 1/10th 2WD buggy, 4WD buggy and truck with round two and round three dates have yet to be announced. More information can be found here.

October 5, 2016

First day of qualifying belongs to Boots

Elliott Boots stamped his authority on the opening day of qualifying at the 1:8 Offroad World Championships, the Kyosho driver making it two from two in Vegas as he took the second round of qualifying. Having taken the opening qualifier from team-mate Jared Tebo, the former Worlds Top Qualifier set the pace on a much slower track ahead of Ryan Cavalieri, his time advantage similar to that of Q1. Behind them, star of practice David Ongaro made up for a disappointing first qualifier to complete the Top 3 ahead of Dakotah Phend and Ryan Lutz with Joern Neumann 6th. For reigning champion Ty Tessmann, 9th was the best he could do after he went with a wrong tyre compound choice.

Continue reading this report here or view our full event coverage here.

October 5, 2016

Arrowmax 20mm droop gauge blocks

The latest addition to Arrowmax’s black and golden tool line are 20mm droop gauge blocks. Machined from aluminium, sporting honeycomb-shaped ornaments and coming in Arrowmax’s new signature black and golden anodising, the blocks help to precisely measure the suspension droop after placing the chassis on the blocks – using an optional droop gauge or callipers. The car stands work for 1/10th touring cars and also buggies and they are available in sets of two now.

Source: Arrowmax [arrowmax-rc.com]

October 5, 2016

Reckward-Tuning glow plug inspection tool

RMV Deutschland have introduced the Reckward-Tuning glow plug inspection tool. Designed by Merlin Depta and made in Germany the tool allows to inspect all Turbo-style glow plugs in order to rate their condition and also parameters such as carburettor settings and more. The tool is pretty simple to use; screw in the glow plug, switch on the lighting and the included loupe will show the glow plug coil in 50-times magnification. Included with the tool comes a handy pouch for easy storage and transportation.

View more images here