Red RC

January 26, 2017

Tamiya set for more (re-)releases in 2017

Information about forthcoming Tamiya (re-)release kits is coming in thick and fast these days as the Japanese company is set for more re- and new releases this year. Following some interesting re-releases such as the Bigwig 2017 and Top Force 2017, Tamiya will reportedly also re-issue the Grasshopper II alongside new releases such as the DT-03 based Racing Fighter Chrome entry-level 2WD buggy, the Ferrari F12TdF and the MAN TGS Team Reinert Racing truck. We bring you more information on all kits as soon as they surface.

View the other new kits here

January 26, 2017

HRC Racing polarity checking adapter harnesses

HRC Distribution have introduced several polarity checking adapter harnesses pre-wired with the most popular power connectors. The adapters check the battery’s polarity once they are plugged in with a red LED warning for reverse polarity while a green LED indicates that everything is ok. The harnesses are available with 4mm or 5mm bullet-type connectors for the battery side and T-type, EC3, Tamiya, Traxxas and XT90 connectors on the charger/ESC end. An integrated balance port allows to use the hardnesses as charger adapters but also to make tube-style connector competition LiPo packs usable with reverse polarity-protected “RTR kit” connectors.

View the other adapters here

January 26, 2017

Reflex Racing YRX12 alloy chassis & TC7 hard bumper

Coming from Reflex Racing are an aluminium main chassis and lower pod plate kit for the Yokomo YRX12 as well as a hard wide bumper and bumper brace kit for the Team Associated TC7.1. Starting with the Yokomo parts, the chassis and lower pod plate were designed for racing on high-bite CRC black carpet and they will increase stability and enhance traction under high-bite conditions. Both parts are machined from high-quality 7075-T6 aluminium, they come black anodised and with machined silver edge details.

content

January 26, 2017

SWorkz S35-3 1/8th nitro buggy – More images

Ahead of its official introduction SWorkz have released more images of the new S35-3 1/8th nitro buggy kit. The latest incarnation of the S35 platform comes with newly designed front arms with the upper wishbones allowing to use carbon fibre inserts to adjust stiffness while a new steering plates makes for an optimised Ackermann geometry. Other changes include new shock towers, a redesigned radio tray, updated rear arms as well as a new 7075 aluminium chassis that allows to attach optional weights to fine-tune the buggy’s weight distribution.

View more images here

January 26, 2017

TLR 22T 3.0 2WD stadium truck kit

Team Losi Racing have introduced their new 22T 3.0 2WD stadium truck kit. Based off of the championship-winning 22 3.0 buggy the latest variant of TLR’s popular race truck benefits from the same innovations as the 22 3.0 buggy and so the truck features a revised motor position that is 12mm closed to the diff gear for better rear end grip, more corner entry steering and an overall easier to drive vehicle. Also included is the new 3-gear transmission for decreased chassis roll and improved stability. The front suspension received a make-over with all-new C-blocks and A-arms as well as a bellcrank steering system that makes for a more neutral yet nimble handling.

Continue reading here

January 26, 2017

Lee & Chiang successful at Urban Astro Buggy Champs

Singapore’s electric buggy racing season flagged off this past weekend at the first round of the 2017 Urban Astro Buggy Championships. Run at Urban PlaySpace in downtown Singapore, racers were greeted with a track layout sporting a new wall-ride as well as an elevated straight. In the 2WD class, Esmail Apandi (Xray) TQ’ed in front of Nicholas Lee (Yokomo) and Kamen Koh (Serpent). In the finals, Esmail took the leg 1 win after an early mistake by Nicholas. In leg 2, Nicholas bounced back with a win as Esmail tumbled in the tricky front-double section. With Kamen finishing second in both legs 1 and 2, there would be a 3-way showdown in the final leg. A3 then was a close affair with Esmail holding the early lead after mistakes by Nicholas dropped him to fourth. Never giving up, Nicholas put in a masterclass performance to close rapidly on Esmail. At 90 seconds remaining, Nicholas took advantage of a small opening as Esmail ran wide to take the lead. Nicholas held off the determined Esmail to win an exciting Leg, taking the overall win.

Continue reading the report here

January 26, 2017

T-Works BD7/8 steering limiter screw sets

T-Works have introduced three steering limiter screw sets for the Yokomo BD8 and BD7’16 and ’15 kits. Machined from aluminium, coming black anodised and with silver details the parts directly attach to the steering assembly of Yokomo’s latest touring car kits and they help to create defined and wobble-free mechanical steering limiting. Available are three sets including 7mm to 8.5mm diameter screws, 7mm to 10mm or 9mm to 10mm limiters.

View the other sets here

January 26, 2017

ProStar B6 titanium hinge pin set

Coming from ProStar R/C and made for Team Associated’s B6 series of buggies is a titanium hinge pin set. The 8-piece kit replaces the stock parts with high-quality Grade 5 titanium upgrades that will not rust or break. Included are four 3x34mm front bulkhead pins as well as two 3x26mm and two 3.5x48mm shafts and the kit is available now.

Source: ProStar R/C [prostarrc.com]