Red RC

July 27, 2016

Reflex Racing RR12T2 conversion & geometry update kit

Reflex Racing have introduced the new RR12T2 conversion kit for the RR12V2 and the Team Associated 12R5.2 as well as an geometry update set for the RR12V2. Starting with the conversion, it will take the RR12V2 to new RR12T2 specifications and it includes a 7075-T6 aluminium chassis, 2mm quasi weave lower pod plate, a new rear motor mount brace as well as revise geometry motor pod and pod sliders compatible with a motor fan. Also included is a revised geometry shock mount, new stronger rear droop plate, symmetrical servo mount a well as a new 7075-T6 unimount with silver chamfered edges and a left side axle spacer. The kit will also work with the Team Associated 12R5.2 and it is available now.

Continue reading here

July 27, 2016

Giuliano Marra wins at Swiss Touring Nats Rd4

Round four of the Swiss Electric Touring Nationals was held at the HSH outdoor track in Dintikon. In the Pro Stock class Giuliano Marra made a clean sweep in the qualifiers to take the pole position for the finals from Jan Hässig in second and Cedric Brütsch in third. Giuliano and Jan would also make it out in the triple A-mains with Giuliano taking wins in A1 and A2 and Jan coming in first in A3. Overall Giuliano Marra (Yokomo) took the winning honours from Jan Hässig (Yokomo) while Marco Balmer (Team Magic) snatched the final podium spot in the tie-breaker.

Source: HRC Distribution [hrcdistribution.com]

July 27, 2016

Avid A800 Aura driveline bearing kit & Ti ball studs

Coming from Avid and made for Awesomatix’ A800 touring car are the Aura driveline bearing kit and the titanium ballstud conversion. Starting with the bearing kit, included are a total of 14 ceramic ball races that utilise Si3N4 ceramic balls for smooth rotation and reduced drivetrain drag. The ball bearings come lubed with high-speed AeroShell light oil to further reduce friction. Please note that above image is just a sample with the actual set containing differing sizes and also shielded bearings.

Continue reading here

July 27, 2016

Yeah Racing Traxxas Slash nylon mesh chassis guard

Yeah Racing have introduced their new nylon mesh chassis guard for the Traxxas Slash, E-Revo and Summit. Designed to protect the electronics from dirt and rocks the mesh cover fits like a glove around the chassis tub and it is easily fastened using velcro-backed tape. A zipper along the centre line allows for easy battery changes without the need to remove the whole cover.

View another image here

July 27, 2016

MIP B6 Roller Pucks bi-metal drive system

Coming from MIP and made for Team Associated’s B6 2WD buggy is the Roller Pucks bi-metal drive system. It features two-piece bi-metal outdrives that are comprised of both 7075–T6 aluminium and high-grade heat tempered machine steel to shred 30 percent off of the OEM rotating mass, which equates to quicker acceleration without compromising strength. Being that the diff outputs are steel, it is fully compatible with the popular MIP Roller Pucks which have a 360 degree wear pattern and are 100 percent replaceable. The system is ideal for racers using 10.5T motors or higher and it not only fits the new B6 but also the older B5 and B5M. The kit includes all needed parts to perform the conversion minus the stock diff gear, wheel axles and CVA rebuild kit.

Source: MIP [miponline.com]

July 27, 2016

X Factory Infinity RB5/6 carbon idler shafts

X Factory have introduced their new Infinity carbon idler shafts for the RB5 and RB6 line of 1/10th 2WD vehicles. The shafts are exactly 5mm in diameter and they replace the somewhat undersized original parts that can lead to idler gear failures due to the bearings wobbling on the shaft. The Infinity items are made from high-quality carbon material and they are of a hollow design, making for slight weight savings.

Source: X Factory [xfactoryrc.com]

July 26, 2016

Marc Fischer teams up with Trion

Trion have announced the addition of Germany’s Marc Fischer to their factory team. The newly signed Capricorn pilot will be using Trion’s range of brushless motors and speed controllers alongside Muchmore LiPo batteries, chargers and tyre heaters. Marc has the following to say about the deal:

I would like to take the opportunity and thank Trion and Mr. Kobayashi as well as Muchmore and Mr. Jang for the support and the trust in me. This is a real dream coming true and I am looking forward to a fruitful cooperation for the remainder of this season and beyond.

Source: Trion [team-trion.jp]

July 26, 2016

Shin Adachi confirmed for Dragon Stone Champs

Adding to the growing talent pool of the 2016 Dragon Stone Asian Buggy Championships, the event’s organisers have announced the confirmation of one of the industry’s most notable and experienced racers, Team Serpent’s Shin Adachi. With Shin’s massive experience in 1/10th scale electric vehicles as multiple time Japanese National champion, Shin is also lead designer and team manager of Team Yokomo’s offroad division. In addition, Shin also plays a crucial part in Team Serpent’s 1/8th nitro development program. On top of his 1/10th scale accomplishments, Shin has made numerous appearances in Japan’s Nationals finals, a NeoBuggy finalist, and current 2016 FEMCA Vice Champion in 1/8th scale. Having Shin on hand will be great addition as he will be able to apply his experience and expertise to help all Team Serpent customers as well as demonstrating his 1/8th nitro prowess on track.