Red RC

August 20, 2016

BRCA 1/8 Electric On-road National Rd6 – Report

The sixth round of the BRCA 1/8 Electric On-road National series took place last weekend at the Wombwell Model Car Club. During Saturday’s practice the grip was surprisingly good for a dusty unused Wombwell circuit, Alex Thurston was leading the practice times and it looked set to be another display of domination by the young chap from Coalville. On Sunday the weather was to remain warm and dry, with it becoming slightly over cast towards the end of the day. After four rounds of qualifying the Electric A final saw Alex starting from the pole position with Frank Dambrine on the 2 spot and Paul Bellinger rounding out the top 3.

Continue reading the report here

August 19, 2016

Xray Racing Series – Announcement

Xray have announced their new Xray Racing Series for the 2016/17 season. The events will be run in multiple countries and classes and all information about dates, rules and more will become available shortly.

Source: Xray [teamxray.com]

August 19, 2016

JConcepts XB2 Aero front wings

Coming from JConcepts and made for the Xray XB2 buggies are the Aero front wings. Already available for a range of 2WD buggy the tailor-made wings help to fine-tune the buggy’s aerodynamic behaviour. The Aero front wing mounts in “clean air” and is quite easy to trim, use and test without sacrificing all important track time. Available in two widths, the driver can choose either the “narrow” for a lighter feel or “wide” for heavier down force. Each set includes two narrow or two wide wings.

View the narrow front wing here

August 19, 2016

Team Magic Pro-J touring car setup tools

HRC Distribution have introduced the new Pro-J touring car setup tools. First up is the 3mm to 9mm ride heigh gauge. Offering fine 0.2mm increments in the 3mm to 6mm range the gauge offers a more coarse 0.5mm increments for the 6mm to 9mm range. The tool is machined from high-quality aluminium, it comes black anodised and with laser-etched markings. The second new part is the conventional droop gauge. Designed for “under arm” measurements the tool offers a -3mm to +10mm range and like the ride height gauge it is made from black anodised and laser-etched alloy.

Continue reading here

August 19, 2016

Tekno introduce revised SCT410 bumper & shock parts

Coming from Tekno RC are a revised SCT410 bumper as well as revised shock parts. Starting with the bumper, the front skid plate has returned to the SCT410 bumper by popular demand. This change brings increased durability and chassis protection to the front of the truck. For those that would prefer the added ground clearance, the skid can be easily removed. The part is fully compatible with all generations of the SCT410 and requires one M3x8mm cap head screw and two M4x15mm flat head screws.

Continue reading here

August 19, 2016

Shepherd Velox V10 “WC” 3mm carbon radio plate

Shepherd Velox V10 "WC" 3mm carbon radio plate

Hot on the heels of Shepherd’s Velox V10 WC upgrade kit comes the new 3mm WC carbon fibre radio plate. The new optional upper chassis plate is made using an extra stiff 3mm carbon material to reduce the overall flex of the car, resulting in an even more precise handling especially under high-grip conditions. Furthermore it is more resistant against crashes. Sporting the same design as the “WC” radio plate with different positions for the servo saver and the steering servo it is necessary to use the new #408142 servo saver bushing and a 5x8x2,5mm ball bearing to mount the part.

Source: Shepherd [team-shepherd.com]

August 19, 2016

Josh Cyrul teams up with Destiny

Veteran U.S. on-road racer, Josh Cyrul has announced newly-founded Japanese brand Destiny to be his new electric on-road chassis sponsors for this season. Josh will use the company’s RX-10S touring car alongside the forthcoming Destiny 1/12th scale pan car once it is released and he has the following to say:

Huge Thanks to Terutaka Hanaumi, David Spashett , Scott Jakes and Xenon-USA for the opportunity to jump back heavily into racing this season. I’ve already begun building and super impressed with the fit, finish and overall quality of the car!

August 19, 2016

VBC introduce new pan car option parts

VBC introduce new pan car option parts-1

VBC Racing have introduced a range of new option parts for their 1/10th scale pan cars. First up is the brass lower arm support for the LightningFX and FXM. Machined from heavy brass material the part weighs in at 39.3g, making it 32.4g heavier than the standard composite mount. While offering a high rigidity the support also changes the car’s weight bias which can be beneficial in a range of track conditions.

Continue reading here