Red RC

May 18, 2016

Stefan Schulz wins at Berlin Touring Masters Rd1

The opening round of the Berlin Touring Masters was held at the 1. MRC track in Berlin, Germany. The event was held in the three classes of 13.5T, 17.5T and Rookie and in the 13.5T class it was Niko Gorski who took the TQ after the qualifiers. In the triple A-mains though local racer Stefan Schulz made maximum use of his track knowledge, passing Niko on the first lap in every leg and bringing home the win from Niko Gorski on the runner-up spot while Julian Köster rounded out an all-Xray podium in third.

Source: Xray [teamxray.com] | Image: Stefan Schulz

May 18, 2016

LMR 27 1/10th scale low-profile buggy wing

LMR have introduced their all-new 27 wing for the use with 1/10th off-road buggies. Designed with high-traction racing in mind the wing weighs in at only 17 gram while its low-profile design significantly lowers the car’s centre of gravity. For lower grip racing conditions the wing has a recess where an optional 1mm carbon fibre plate can sit and act as a stiffener, making this wing produce the maximum amount of downforce and still weighing less than 20 grams in the process. The pre-drilled plate, currently only available for Yokomo buggies, has three hole placements so the wing can be moved forward or back depending on the level of traction required.

Source: LMR [l-m-racing.co.uk]

May 18, 2016

Arrowmax 7.4V 5000mAh low-profile LiPo battery pack

Arrowmax have introduced their new 7.4V 5000mAh low-profile LiPo battery pack. Aimed at touring car racers the battery utilises an only 22.5mm tall hardcase to lower the car’s centre of gravity. It is made using high-performance 55C/110C cells, ideal for both Modified and Stock racing, and uses 5mm tube-type connectors.

Source: Arrowmax [arrowmax-rc.com]

May 18, 2016

BRCA 1/10th Electric Off-road Nationals Rd2 – Report

BRCA 1/10th Electric Off-road Nationals Rd2 - Report

Round two of the BRCA 1/10th Electric Off-road Nationals was held at the famous Robin Hood Raceway. As usual the 2WD portion of the event was held on Saturday and in round 1 of qualifying Neil Cragg would take the round by near 6 seconds. Craig Collinson came in 2nd and Kev Lee in 3rd. In round 2 Lee Martin would snatch the top spot from his team mate Tom Cockerill and with Craig in at the 3rd spot. Craig Collinson with a 3rd had already cemented his A-final. The 3rd round was again exhibition stuff from Neil Cragg to go some 5 seconds quicker on time and take round 3 with Lee in 2nd, Craig another 3rd with Tom Cockrill in 4th. The last round would decide the pole position on the grid, a shoot out between the superstars but a certain Tom Yardy popped up to the party to set a blistering time. It was the fastest at the time. Lee had it all to do and was on fire from the off. Lap by lap he was on and off beating Tom’s time and at the end he took another second off Tom’s time to take the fastest time of the day and also secure pole for the final. 2nd in round went to Tom Yardy with Neil in 3rd.

Continue reading the report here

May 18, 2016

Sweep Racing silicone shock & differential fluids

New from Sweep Racing comes a range of silicone shock and differential fluids. Made using pure high-quality silicone oil the fluids are available as 200cst to 950cst shock and 1k to 10k gear differential variants and they come in 50ml bottles with pointed caps for easy and convenient use.

Source: Sweep [sweepracing.com]

May 18, 2016

Samix aluminium servo arms for Axial vehicles

Samix have introduced aluminium servo arms for a range of Axial vehicles. Machined from high-quality aluminium the arms are of a clamping design for a secure fit even in high-stress applications. Available as 23T and 25T variant the arms offer 16mm and 20mm ball stud mounting positions, they are available in six different colours and fit the Axial SCX10, XR10, Wraith, AX10 and Exo.

View another image here

May 18, 2016

Kyosho R4Evo V2 aluminium upper rear bulkhead set

Coming from Kyosho and made for the R4Evo 1/10th 200mm nitro touring car is the V2 aluminium upper rear bulkhead set. Using the parts makes for more rigidity of the rear end for improved traction while two different camper mount plates allow for a wider setup range. Included in the set are two new upper bulkhead halves, two carbon fibre camber plates and suitable hardware.

Source: Kyosho [kyoshoamerica.com]

May 18, 2016

Truman, Tatlow & Everett win at SRS Series Rd3

The 3rd round of the SRS series was held at the relatively unknown ARC venue near Colchester. The Nitro Buggy class was dominated by Tony Truman taking the TQ and win, with Mark Rumble 2nd and Mark Everitt 3rd. The Truggy class saw an excellent win by James Tatlow, who drove an excellent final to take top honours after placing his truggy on pole. Backing up James were fellow Agama racers Allan Bridgeman and Martin Hart to complete the podium.

Continue reading here