The final round of the Lalihouse Indoor Offroad Series was held this past weekend with a special guest in appearance. Two time IFMAR World Champion Atsushi Hara was there to battle against a fast bunch of local talent and in the 1/10h 4WD Electric Buggy class Hara soon made his intensions clear by taking the overall TQ and winning all three A-mains to take the day’s win from young Jonathan Yeung on the runner-up spot.
Circulo Verde’s CV Race Track played host to the 3rd Annual Philippines Underdawg Race. The event is the only race where nitro buggies run together without the usual segregation between expert, intermediate and novice drivers; this way everybody gets a chance to compete against everyone else. Paul Capino set the TQ but with the finals underway, Capino lost his grip on the lead with a loose engine mount screw and the rest of the field battled it out for the next 55 minutes. In the end, Sherwin Yu took the win followed very closely by former electric driver Gerome Ling. Raffy Abello and Nani Tagle would round out the third and fourth spots respectively, making it an all Team Associated top 4.
Source: Team Associated [teamassociated.com]
Italian brand BMT, know especially for their successful nitro on-road cars, have joined the 1/10th electric touring car game with the introduction of the BMT 601 4WD touring car. The vehicle is based on a symmetrical 2.3mm carbon fibre chassis for equal left-to-right flex characteristics and topped off by a 2mm carbon upper deck that allows for various flex settings. Compact and lightweight aluminium bulkheads take the front spool and rear gear differential with the spool featuring steel outdrives while the rear diff is equipped with composite internals and double O-rings. The centre pulleys are made from aluminium and the belts supplied in the kit are low-friction Bando belts for high drivetrain efficiency. On the suspension side of things the 601 features aluminium suspension mounts with hard composite inserts, the front and rear anti-roll bars use ball races for maximum precision and the bulkhead covers are a one-piece affair with the shock towers attaching using three bolts instead of the usual four. The kit is rounded out by mirror-polished and hard-coated aluminium shock absorbers with TiNi-coated shock shafts and all suspension parts are made from hard-compound plastic composite material.
View the features and more photos here
Sign-up for the 17th annual The Dirt Nitro Challenge will start next Friday, November 20th. For the first time in the 17 year history of the DNC the organisers are limiting entries for the 1/8th scale track, something that is needed after a huge amount of last-minute entries at the 2015 edition. Capping of the entries at around 650 will ensure a smooth event for everyone including time schedules for the weekend and finishing each night at reasonable hours. More information about the iconic event as well as sign-up are available here.
Avid have introduced an aluminium chassis plate for the Xray T4’16 car. At 2mm thickness the chassis makes for an overall lower centre of gravity, the car can be run with lower suspension mounts and the 7075-T6 aluminium material makes for more torsional stiffness, improving handling especially on medium to high-grip surfaces. The 82mm wide chassis also features a battery tape slot on the bottom part, the motor pocket width is decreased and double pocketed to keep as much strength possible and the motor mount flex control hole has been modified with a large bevel on top of the chassis to prevent the screw head from hitting chassis. The part is a direct fit on the T4’16 and available now.
Designed for high speed, Axial’s soft rear swaybar set for the recently announced RR10 will allow to soften up the vehicle’s suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. The set includes all needed mounting hardware and a soft swaybar wire.
Team Associated have introduced the V2 CVA upgrade kit for the ProSC 4×4 short course truck. The kit gives all the parts needed to switch to the new CVAs for greater strength. The parts, that are also available separately, are not interchangeable with the stock items and they also fit the ProLite and ProRally.
Source: Team Associated [teamassociated.com]
Schumacher have introduced the new Core RC hauler bag. Designed to be a more manageable size at 29x44x50cm the bag features three draws that are being made in one piece robust moulded plastic with no assembly required. Made from high-quality material the bag sports subtle Core RC branding and it utilises an oversized zip for extra strength and durability. Underside plastic feet help to protect the canvas material of the hauler bag that fits comfortably under the parcel shelf of a regular hatchback.
