Red RC

April 21, 2016

Hupo Hönigl double TQs & wins Austrian Buggy opener

The opening round of the Austrian 1/10th Electric Off-road Nationals was held at the MRC Oberaich track, attracting a record entry of drivers. The track is unique in a way that it can be run with both 1/10th and 1/8th scale vehicles without appearing to big or too small for each of them and in recent years it also offered loads of traction but this year the sugaring did not work out, leaving the track glazed and polished yet still very abrasive. Xray’s Hupo Hönigl was able to TQ both the 2WD and 4WD buggy classes and at the end of the day he went home with a double victory although it took him some time in each final to find his rhythm and pace. Behind Hupo, Schumacher’s Peter Pinisch would grab the runner-up spots in 2WD and 4WD with Marcel Rekettye (Yokomo) coming in third in 2WD while Team Associated factory driver Stefan Pfeifhofer rounded out the 4WD podium.

View the final results here

April 21, 2016

Schumacher 4WD Mini Pin 2 front tyre

In addition to the Mini Pin 2 rear tyre, Schumacher now have also introduced the Mini Pin 2 4WD front variant. The version 2 front tyre was designed to match the super high grip Mini Pin 2 rear tyre which is popular on lower traction multi surface venues. The tyre offers maximum steering response and it is available as tyre only or pre-glued on Schumacher’s 12mm hex Flexlight wheel.

Source: Schumacher [racing-cars.com]

April 21, 2016

Team Titan Blitz GT2 1/8th scale GT bodyshell

Team Titan have introduced the new Blitz GT2 body shell for 1/8th GT chassis using a wheelbase between 323mm to 328mm. The GT2 body is designed to provide more steering than the previous GT shell, utilising a redesigned rear boot lid that increases air flow to the wing for more stability without losing top end speed from excess drag. The rear of the body features three wing support towers, with included large diameter plastic wing screws, to ensure a lightweight yet durable wing mounting. The body comes clear, with window mask, wing mounting hardware, sticker sheet and two wings to help tailor the required down force.

View more images of the GT2 here

April 21, 2016

Muchmore lightweight 40mm cooling fan mount

Muchmore have introduced a lightweight aluminium motor cooling fan mount for 40mm units. Cut from high-quality aluminium and coming black anodised and laser-etched the mount features an inner cut out to route the fan connection wire to in order to make for neat and clean wiring. The mount simply attaches to the motor by clipping it on and it is designed exclusively for the use with 40mm fans.

View more images here

April 21, 2016

Exotek 22 3.0 LCG aluminium gearbox set

Following a first teaser image Exotek have now released full details on their all-new LCG gearbox set for the TLR 22 3.0 buggy. Centred around an aluminium gearbox with 3-gear setup the concersion let the three transmission gears operate in a straight line for an extra low centre of gravity and a smoother running idler gear. The diff case is machined from 7075 aluminium and the new motor plate is of a vented design to lower the motor temperatures. In addition to the lower centre of gravity the gearbox stiffens up the rear of the chassis as well as the shock tower for improved consistency on high-bite tracks. Using the gearbox requires to drill two extra holes into the chassis although the original gearbox can still be used, allowing for gearbox swaps if conditions call for it. Included in the set comes the black anodised and laser-etched gearbox, the alloy lightweight motor plate, a Delrin diff cover, carbon fibre battery strap with alloy hinge as well as alloy waterfall spacers, the chassis drill template, hardware and full instructions.

View more images here

April 21, 2016

Ficco, Wynn & Witteman win at Mile High Indoor Champs

The recent Mile High Indoor Championship marked the unofficial end of the 2015/16 indoor season in the US and it saw TQ holder Mario Ficco walking away with the win from team mate Brian Wynn in the Formula class. In the growing World GT-R rubber tyre category, Brian Wynn would secure the pole position for the A-main that he went on to win in style. Elsewhere in the hotly contested 1/12th 13.5T class, veteran racer Mitch Witteman laid down some impressive TQ runs and he also took the win in the A-main final in a group of fast, sponsored, top level drivers.

Source: CRC [teamcrc.com]

April 21, 2016

Reflex Racing introduce new TC7 & TC6.2 options

Reflex Racing have new option parts for the Team Associated TC7 and TC6.2 touring cars available. First up is an alloy chassis for the TC7 that was custom designed around the latest AE Platform to maximum performance especially on the new CRC and ETS black carpets. The chassis moves the flex points away from the centre of the chassis and towards the bulkheads for more rotation, steering and stability which translates into faster lap times and a more consistent car that is also easier on tyres over a full run. The chassis is now also narrower, allowing for lower ride heights and less rubbing on the newer CRC Carpet which calls for higher ride heights. The 81mm wide chassis is cut from 7075-T6 ThyssenKrupp aluminium alloy, it includes carbon fibre battery brackets and mounting hardware.

Continue reading here

April 21, 2016

Schelle B5M & TLR 22 3.0 vented motor plates

Coming from Schelle Racing Innovations are lightweight vented motor plates for the Team Associated B5M and the TLR 22 3.0. Cut from high-quality aluminium and coming in an anodised finish the motor plates offer minimised weight, increased airflow, and maximised rigidity. The unique vent slits are machined partial depth on the back side of the motor plate to create two tiny slits in the plate. These slits will keep air flowing through, and everything else outside and the plates are fully machined to keep them from warping under extreme stress and heat and they weight in at only 12.95g for the B5M and 13.8g for the TLR plate. They are available as B5M 3 or 4-gear variant in black or blue colour and as black or hard anodised finish version for the 3-gear TLR 22 3.0.

View more images here