Red RC

August 4, 2015

Axial SCX10 Jeep NuKizer & Mighty FC bodyshells

Axial have two new bodyshells for the SCX10 truck available. First up is the Jeep Nukizer 715 concept vehicle that was revealed back in 2010 at the 45th Annual Easter Jeep Safari. The body is scaled around 12″ wheelbase SCX10 vehicles and compatible with the SCX10 Wheel Wells. The wheelbase can be easily adjusted by using the SCX10 TR Links Set 12″. Also new is the Mighty FC concept vehicle body. Again made for the SCX10 the pick-up body uses a 11.4″ wheelbase. Included with the bodies are full decal sheets, easy to install LED light buckets, front and rear body assemblies, all necessary body hardware and window mask sheets.

Click here to view more photos

August 4, 2015

Shepherd Velox V8 EC Black Edition kit

Following the introduction of the Velox V10 Pro Black Edition Shepherd have announced the Velox V8 EC Black Edition. Like the V10 Black Edition the 1/8th scale kit is equipped with black anodised aluminium parts instead of the regular Shepherd blue parts, giving the successful platform a new and stylish look. The black aluminium parts will be also available as a conversion kit or as single pieces.

Source: Shepherd [team-shepherd.com]

August 4, 2015

Updated Serpent 1/10th electric buggy wheels

Serpent have introduced a range of 61mm wheels for 1/10th off-road buggies as well as standard size 4WD front wheels. Starting with the 61mm rims, they are of a larger diameter compared to standard wheels to accommodate the latest ROAR wheel dimension updates. Available as 2WD front, 4WD front and general rear variant in yellow and white colour the wheels fit Serpent’s range of 1/10th buggies as well as many other brands. Also new are standard size 4WD front buggy wheels for the forthcoming Spyder 4WD kit. Like the 61mm rims they are available in fluorescent yellow and white colour.

Source: Serpent [serpent.com]

August 4, 2015

Serpent 977 Evo radio plate support post

New from Serpent and made for the 977 Evo 1/8th scale kit is a radio plate support post. The 7075-T6 aluminium part will stiffen the front end of the car which can be a helpful tuning aid on very high-bite surfaces. The part is a direct fit on the Evo and must be used in combination with the central flex system to make it work.

Source: Serpent [serpent.com]

August 4, 2015

PSM RC8B3 shock standoff set & carbon shock towers

German company PSM have introduced a range of option parts for the Team Associated RC8B3 buggy. First up is a set of aluminium shock standoffs. Made from high-quality 7075-T6 aluminium and coming with EV2 silver coating for improved surface protection the set weighs in at only 11g including mounting material. The 12-piece set is made in Germany and includes the standoffs, shock alignment shims as well as counter shims. Also new are 5mm front and 4mm rear carbon fibre shock towers. Made from authentic PSM semi-gloss finish material the ultra lightweight parts are direct replacements for the stock shock towers and they weigh in at 16g and 18g respectively.

Click here to view more photos

August 4, 2015

LRP VTEC Groove & Kamikaze 1/10th buggy tyres

LRP’s VTEC Groove 2WD front and rear tyres are now also available with white multi-spoke rims. The proven tread design allows to use the tyres on a range of surfaces while the special J-compound rubber makes for optimised traction and a high durability. Coming pre-glued and including moulded foam inserts the wheels are usable for many of today’s 1/10th 2WD off-road buggies with 12mm wheel hex adapters.

Source: LRP [lrp.cc]

August 4, 2015

Kammann takes West division E-Buggy regionals Rd4

Round four of the German West division 1/8th E-Buggy regionals was held at the RCRT Duisburg track. Hot weather made for dry and dusty conditions and this caused some headache for the drivers and after the qualifiers it was Chris Kammann who came out fastest from Lukas Strothmann an Max Kempchen. In the single 10-minute A-main leg Chris was able to conserve his performance to take a commanding win some 14 seconds in front of second placed Lukas Strothmann. Peter Schulte-Batenbrock would round out the podium in 3rd.

Source: Team Durango [team-durango.com]

August 4, 2015

Exotek Exo22 replacement bottom plates

Coming for Exotek’s recently introduced Exo22 chassis conversion kits are two replacement bottom plates. Made from either dark anodised 3mm 7075 aluminium or 2.5mm carbon fibre the plates not only are a direct replacement but they also act as a tuning aid as both are interchangeable and offer different characteristics. Using the carbon plate in a former aluminium car makes the buggy lighter and more responsive while the alloy chassis maximises stability and traction beside offering a lower centre of gravity.

Click here to view the carbon fibre chassis