Red RC

June 30, 2015

Tekno EB48.3 1/8th electric buggy kit

Tekno RC have introduced the EB48.3 1/8th electric buggy kit. Based off of the successful EB48.2 the new variant features a completely redesigned the suspension geometry with the new design aimed to improve big jump landings while at the same time improve small bump handling and consistency. Longer shocks have been fitted to increase suspension travel and new towers were designed to optimise shock angles. Revised upper camber link positions on both the front and rear shock tower provide setup options that improve driveability and traction in all conditions. A new piston was designed specifically for the longer shocks to adjust the compression/rebound characteristics while the lower arms feature new shock mounting locations.

Click here to continue reading

June 30, 2015

JConcepts Scorpios 2.2″ crawler tyre

JConcepts Scorpios 2.2" crawler tyre

JConcepts have unveiled the new Scorpios 2.2″ all-terrain crawling and rock racing tyre. Ideal for vehicles like the Axial Yeti, the Scorpios scale looking tread, extra tall 152mm size and profile, jump out as the most obvious features. The padded arrangement of tread makes the tyre ideal for transitioning from the hard road to dirt and then into rocky and uneven terrain. Once power is applied to the vehicle, the tread spacing opens up which allows for some deep digging making it a great working tire in dirt and muddy conditions. The flexibility of the compound combined with the close arrangement gives the tyre a grippy feel but still maintains that all important look. The large overall height provides plenty of ground clearance for an abundance of terrain and internal grid ribbing help maintain its upright structure during hard loads and on power bursts. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

June 30, 2015

Max Power GT-R 3.5cc on-road engine

Max Power have introduced the Fantini-tuned GT-R 3.5cc nitro on-road engine. Intended mainly for Rally Game and GT cars the 5-power engine features a “booster” sleeve, a highly tuned, balanced and silicone-filled crankshaft and the piston is made of a special alloy material with a high amount of silicium. The engine comes with a 2-needle carburettor with interchangeable venturi inserts and it is designed to offers both good mileage and high torque.

Click here to view more photos

June 30, 2015

Gary Baird wins at Irish 1/8th Off-road Nationals Rd2

The second round of the Irish 1/8th Off-road Nationals took place last weekend at the AstroTurf track of NIMCC. The track itself is challenging as it is pretty tight, twisty and full on with a pretty quick lap time of below 30 seconds. Qualifying and the weather was playing its part with sun and showers and although it dried very quickly half the track was bone dry the while the other half stayed slick. Alan Scroggie set the pace followed by Gary Baird, Barkley Abernethy and Aaron Vance. For the finals it was the same story with the weather, with clouds in the sky Mini Pins where a no and most in the main final decided to go out with Spirals bolted to their cars so the first few minutes where interesting until everyone got used to the grip level. Alan had an issue and had to retire by the first round of pit stops which left Gary to take up the lead which he did not come close to relinquishing. Barkley had a flame out at the 10 minute mark and spent 35 minutes clawing his way back up to 2nd. Aaron Vance cut a few times and promoted Colin Whelan to a well deserved 3rd while Gary Baird had a cool 45 minute drive to a deserving win in difficult conditions.

Source: Nemo Racing [nemoracing.com]

June 30, 2015

Brilliant RC cleaning gum

New from Brilliant RC comes a special cleaning gum for both nitro and electric cars. Not comparable with other cleaning gums available the Brilliant RC product is of a special, slightly harder yet extra sticky formula that keeps its consistency even under high temperatures. The putty comes in easy to use 100g flat cans and it is available now.

Source: Shepherd [team-shepherd.com]

June 30, 2015

Schelle B5M offset V2 topshaft set

The new Schelle offset V2 topshaft set for the Team Associated B5M, T5M and SC5M was designed to shift the motor weight closer to car’s centre line. The set utilises a 3mm extended hard-anodised aluminium top shaft, spacer tube, and a 3mm carbon fibre motor plate spacer to shift the motor plate and slipper unit in the car. This results in more stability and symmetric turning forces. The set fits any V2 3-gear or 4-gear gearbox.

Source: Schelle Racing Innovations [schelleracing.com]

June 30, 2015

Scorpion Precision Tools mini tools pack

Scorpion have expanded their line of Precision Tools by the mini tools pack. Offering a total of 8 different drivers and wrenches the pack is ideal when building, maintaining or adjusting mini RC vehicles such as the Atomic AMZ, the Kyosho’s Mini-Z or even 150 to 250-size helicopters. The durable tool tips are made from HSS, the tools feature aluminium handles and come in a zipped back for easy and secure storage and transportation. Included in the set are 0.89mm, 1.27mm and 1.5mm hex drivers, 3.5mm and 4.5mm nut drivers and 1.8mm, 2.5mm and 3.0mm Phillips screwdrivers.

Source: Scorpion [scorpionsystem.com]

June 30, 2015

Samix SCX10 high clearance knuckle arm set

Samix have a new option part for Axial’s SCX10 off-road chassis available in the form of the high clearance knuckle arm set. CNC-machined from high-quality aluminium and coming anodised in black, green, silver and gun metal colour the parts not only improve the durability but they also allow for higher steering angles and greater adjustability as the steering plate offers three different steering link positions to adjust the Ackermann effect. The knuckles can be used with the standard steering links and the bearing seat comes additionally machined after anodising for improved precision. Also included is a POM bearing adapter, again to add precision and durability with its design allowing to extract the ball bearings by using a standard wheel axle.

Click here to view more photos