Red RC

July 6, 2015

Exotek Exo-Five Evo5/Evo5MS chassis conversion kit

Exotek have introduced the Exo-Five chassis conversion kit for the Tamiya Evo5 and Evo5MS. Although a bit outdated the Evo5 is still a desirable platform for Stock and VTA racers and with the help of the Exotek conversion the car will be 2015 ready. This chassis set is designed for stock type motors and has the opening in the top plate to work correctly with the smaller spur gears and large pinions used in 13.5T to 21.5T type blinky classes and because of this, the largest spur gear that can be used must be 34mm diameter or smaller. The conversion utilises key features such as a stiffer and ultra narrow 2.25mm chassis, a redesigned motor mount that sits on the left side of the chassis to counter torque steering, and the new one piece, hard anodised spur mount/input shaft eliminates the play and vibration of the stock unit. The new hard anodised centre shaft drive cup uses a Tamiya CVD puck for reduced wear and a quieter drive line. Also included is a new 1-piece servo mount and a trick battery mounting system that accepts standard or shorty 2S LiPo battery pack. The limited edition kit is available for pre-order now.

Click here to view the full features list and more photos

July 6, 2015

Tamiya TT-02 Petronas Tom’s RC F kit

Tamiya TT-02 Petronas Tom's RC F kit

Tamiya soon have a new bodyshell variant of their versatile TT-02 4WD entry-level chassis available in the form of the Petronas Tom’s RC F. The 1/10th kit features a highly detailed bodyshell with comprehensive decal sheet, a black plastic rear wing and black multi-spoke rims to make for a scale appearance. As for the chassis underneath, the TT-02 is a 4WD shaft-driven vehicle with simple yet sturdy suspension components, a plastic tub chassis and sealed gear differentials. The Petronas Tom’s RC F will become available by end of August.

Source: Tamiya [tamiya.com]

July 6, 2015

Paolo Morganti wins at Byron Fuels Challenge

The annual Byron Fuels Challenge was held at Leisure Hours Raceway in Joliet, Illinois in the the three classes of 1/8th Nitro On-road, 1/10th 200mm Sedan and 1/8th GT. The event officially kicked off on Friday but the day had to cut short due to bad weather. Qualifying got underway in a very similar format to an IFMAR race with 10 minute qualifiers, points system and one hour mains. In the opening round of the 1/8th class Paolo Morganti had a nice clean run and he was able to TQ that round by a large margin. After a heats of the second round, water started to come up making the track slippery. The track crew was trying to keep it dry but at some point it got really bad and they decided to stop. They came up with the solution to change the layout and since in the process they lost some time sorting this out, they decided to go to a 5 minute qualifying program. The interesting part was that the whole left of the track was different, with really narrow sections and chicanes – a typical EP sedan layout.

Click here to continue reading the report

July 6, 2015

Darren Bloomfield wins at BRCA 1/8th Buggy Nats Rd3

Round 3 of the BRCA 1/8th Nitro Buggy Nationals was recently held at the revamped Slough track near Windsor Castle. For the first time in many years, the competitors arrived at Slough to a completely new layout, rather than a tinkered one that could trace its roots back 10 years or more. The new layout offers a huge driving challenge, despite on the face of it looking quite simple. The track is very fast, but has numerous high speed sections that require extreme precision, and with some bumps thrown in the mix it meant mistakes were very easy to come by. Qualifying saw Darren Bloomfield, Elliott Boots and Neil Cragg challenging for the overall TQ, with Elliott taking it from Neil and Darren. The times over the last few rounds were very close as the drivers honed their set ups and worked on the tyre selections. Unusually for Slough the surface was very abrasive and causing high tyre wear for everybody.

Click here to continue reading the report

July 6, 2015

Kaja Novotny wins at KS Challenge Rd3

The 3rd round of the KS Challenge was held at the Kolin RC track in the three classes of 1/10th Electric Open, 1/8th Nitro Buggy and 1/8th E-Buggy. In the 1/8th Electric class Kaja Novotny (Team Durango) took the win from the Serpent duo of Vaclav Broz in 2nd place and 3rd placed Jiri Garbaczewski.

Source: Serpent [serpent.com]

July 4, 2015

6th annual Bring The Heat – Announcement

Flowood R/C Indoor Park will be hosting their 6th Annual Bring The Heat Race September 11th to 13th. Adam and Ronda Drake, along with Ryan Lutz will be returning to FRC and Richard “King Richard” Saxton will be making his first appearance at what is the biggest event held at FRC each year. The number of entries will be limited to the first 300 paid to allow for enough track time for each driver. The race will be run in 1/8th Nitro Buggy, Nitro Truggy, E-Buggy, E-Truggy and 1/10th SC classes and more information is available here.

July 3, 2015

BRCA 2015/16 National LMP Champs – Announcement

The BRCA have announced its calendar of events for the 2015/16 National championship for 1/12th scale electric LMP cars. The championships will be contested over five indoor rounds on carpet, with each driver’s best 3 scores counting towards their final placing in the series. During the season the Championship will visit several of the established venues, but also a couple of new ones. The venues have been chosen based on their geographic spread, the level of their track and facilities, their previous track record of hosting similar events and of course the feedback we have received from our competitors from last year.

Calendar dates
October 31st – November 1st – West Kent (Tonbridge)
November 21st/22nd – Crewe
December 12th/13th – Tamworth
February 20th/21st – Newbury
March 19th/20th – Leeds (MB Models)

Click here to read the remainder of the announcement

July 3, 2015

JConcepts Futaba 4PX radio bag

JConcepts Futaba 4PX radio bag-1

JConcept’s radio bag is now also available in a variant tailor-made for the Futaba 4PX transmitter. Designed with travel, cushion, ease of use and protection in mind the lightweight design consists of a rugged outer bag which has a convenient and easy access zipper closure and inside it has a Velcro closure pouch for additional easy access items. Inside, pull and pluck foam pieces are arranged throughout the entire inner liner allowing racers to chose the size and shape of the item needing protection or organisation while a lower stage foam insert cushions the bottom. The bag is travel friendly and sized to fit inside most luggage or racing carrier bags. JConcepts’ Striker logo and graphic imagery is printed on the outside to match with the remainder of JConcepts’ transportation bags.

Click here to view more photos