Red RC

March 13, 2015

2015 Speed King Tour Rd2 – Report

The second round of the 2015 Speed King Tour was held at the World Jam Racing indoor tarmac track in the Gunma prefecture. Run in Touring Car Modified and Stock classes the event, as usual, attracted both local talent as well as nationally and internationally experienced drivers. In the Modified class 2014 “Speed King” and winner of the opening round, Akio Sobue (Tamiya), started the qualifying taking TQ in round 1 but come the second qualifier VBC driver Yugo Nagashima scored the fastest time only to see Akio striking back in the third qualifier to take the overall TQ.

Click here to continue reading the report

March 13, 2015

RB BXR LS5 V2 long stroke buggy engine

Following the introduction of the BXR LS5 Plus and the BXR SLS5 V2 French company RB now announce the next off-road related engine with long stroke technology, the BXR LS5 V2. The 5-port MES technology engine features a 14.5mm crankshaft, steel ball bearings and a redesigned carburettor with double adjustment and extra spraybar as it is used on all 2015 engines RB introduced to far. Also new is a low centre of gravity cooling head that still allows for exceptional cooling performance and the engine is designed for the use on tracks that need a good amount of power while keeping mileage in mind.

Click here to view the features and more photos

March 13, 2015

Muchmore 16AWG super flexible silicone wire

New from Muchmore comes super flexible high current 16AWG wire that comes in handy especially for 1/10th and 1/12th scale classes. The thin diameter and highly flexible silicone insulation will greatly reduce the chance of unwanted chassis and power pod tweaking while still allowing high currents as experienced in modified racing. The black colour wire comes in coils of 100cm.

Source: Muchmore [muchmoreracing.net]

March 13, 2015

Jordan Chong wins at Sabah Borneo off-road race

The Sabah Borneo nitro off-road race was the first ever race held on the newly built facility and it attracted 22 drivers in total. The start of the 45 minute Nitro Buggy A-main saw Jo Wong and Jordan Chong climbing up the field until Jo ran into trouble that allowed Jordan to catch his teammate. Jordan than was able to cruise to the win with Jo Wong in 2nd place while Salman Siran, who took the TQ after the qualifiers, came in 3rd to complete the podium.

Click here to view the top 10 result

March 13, 2015

Avid T4’15 aluminium main chassis plate

Avid T4'15 aluminium main chassis plate

Avid introduce their 7075-T6 aluminium chassis for the Xray T4’15 touring car. Designed for the use in medium to high-bite conditions the main chassis, cut from 2mm high-quality aluminium, offers several unique features. Compared to Xray’s own alloy chassis the Avid part has several cutouts added and existing diff cutouts enlarged to reduce weight and increase flex while keeping enough material on the sides for the speedo to hold with servo tape. The battery tape on the bottom of the chassis has a cutout slot so it does not interfere with ride height checks or drag on track. The motor pocket width is decreased and is double pocketed to keep as much strength possible. The motor mount flex control hole as been modified with a large bevel on top of chassis to prevent the screw head from hitting chassis while the pinion adjustment hole moved to better access the set screw. The 2mm thickness material also allows for a lower centre of gravity and offers the ability to lower roll centres more than stock. The chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering with the chassis being narrowed to 84mm allowing the chassis to roll deeper through a corner.

Click here to view more photos

March 13, 2015

JConcepts Challenge Rd5 – Report

The 5th round of the Norwegian JConcepts Challenge was held at Mustit RC with the track being run in its normal fashion this time. Saturday started out with 4WD Buggy and 4WD Short Course with Daniel Kobbevik sitting on TQ in both classes. Daniel then went on to win the first two Short Course A-mains to take the overall win early. The race then was on for the runner-up spot with Dag Andre Karlstad ultimately grabbing the 2nd spot from Robert Stormyrbakken in 3rd.

Click here to continue reading the report

March 13, 2015

Infinity 1/8th nitro on-road car – First images

Back in January Japanese company Creation Model announced their Infinity branded 1/8th nitro on-road car and now first images of the project are available. Developed by former Japanese National Champion and World Championship podium finisher Masao Tanaka the yet unnamed car is currently in its final stage of development and it undergoes track testing on various international tracks. The kit is set for a release this Summer with more images being available soon.

Click here to view another photo

March 12, 2015

Mobers and Rettke take German 1/12th titles

Markus Mobers and Jan Rettke have captured the 2015 German 1/12th scale titles. The international German Championships were held at the “Eifel-Ring”, the indoor track of the hosting MAC Adenau club, very close to the Nuerburgring. Like the famous “Nordschleife”, the 111 metre long “Eifel-Ring” is well-known for its interesting and challenging layout where driving ability is more important than the material used. Record-breaking 70 entries were received for the open championship which often attracted only some 40 entries over the past years. Among these entries were also racers from France, Luxembourg, the Netherlands and Poland.

Click here to continue reading the report