Red RC

February 25, 2015

Pro-Line limited edition Fuel Stick

Pro-Line introduce the “very limited edition” Fuel Stick. Used in Ty Tessmann’s dominating performance at the 2014 IFMAR Buggy Worlds, the Fuel Stick is designed as a no expense spared successor to the original Pro-Line Fuel Gun. Built for ultra-fast refuelling, the nozzle tip is also designed to fill the tank completely. The diffuser screen covering the outlet prevents excess splashing and prevents large bubbles from forming during filling. The vertical trigger orientation makes refuelling a truck or buggy more ergonomic especially when doing so over high pit walls and it is also good for use with 1/8th and 1/10th cars. An easy to read gauge marked in 10cc increments helps to estimate mileage at a glance. Continuing the over-the-top theme, the nozzle and trigger assemblies are made of machined billet aluminium anodised in Pro-Line blue. Each Fuel Stick is stamped with a unique serial number and certificate of authenticity verifying that it was fully made in the USA and hand assembled in Pro-Line’s Southern California headquarters.

Click here to view the features and more photos

February 24, 2015

Vectorworks 22SCT 2.0 carbon fibre front shock tower

Vectorworks announce the release of a carbon fibre front shock tower for the TLR 22SCT 2.0 short course truck. The part weighs in at just 10 grams and it is a direct replacement for the stock shock tower. It features triple shock mount locations that match up to the stock version, and it is made from 4mm thick press cured carbon fibre for maximum carbon density and superior strength. It also has counter bored holes to receive the front bumper mount without any extra pieces.

Source: Vectorworks RC [vectorworksrc.com]

February 24, 2015

JConcepts Ruptures 1.9″ performance scaling tyre

JConcepts Ruptures 1.9" performance scaling tyre

New from JConcepts comes the Ruptures 1.9″ performance scaling tyre in green compound. It is meant to be an extremely tacky yet versatile tyre and the design starts with a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirty trail runs. The entire top level of the tread has built-in cuts and recessing which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, JConcepts features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

February 24, 2015

Alejandro Daras wins Moro Race

Last weekend the Moro Race was held at the Moro race track in Sant Joan, Spain. Following a 2nd place in the qualifiers Alejandro Daras took the pole position for the main final. With consistent driving and a bit of luck Alejandro was able to retain his position to cross the finish line as the leader in front of Andres Marcelino and Alejandro Gual who rounded out the top 3 result.

Source: Xray [teamxray.com]

February 24, 2015

Radtec BD7-2015 aluminium chassis

Radtec introduce a 7075 aluminium main chassis plate for the Yokomo BD7-2015 touring car. Made from 2.0mm high-grade aluminium and using the kit’s original chassis shape the chassis offers a higher rigidity than the standard carbon fibre part and precision machining to reduce the overall weight. The left and right outer edges sport 15 degree chamfered edges to reduce chassis scrubbing in high speed corners and the black anodised chassis is a direct replacement for the kit part.

Source: Radtec [radtec-rc.com]

February 24, 2015

Steven Hartson continues with LRP

LRP have announced the contract renewal with 2013 IFMAR 4WD Offroad World Champion Steven Hartson. The Team Associated driver will continue to use LRP’s full line of electronics including brushless motors, speed controller, batteries, chargers and accessories as well as LRP’s nitro off-road engines for his 1/8th offroad excursions. Steven has the following to say about the deal:

I’ve trusted LRP equipment for 8 years now and I’m very happy to be continuing with LRP in 2015. LRP products have provided me awesome power throughout my career and I know there is more “Blue is Better” technology coming soon, starting with an entirely new battery line in April 2015. I look forward to using this new technology to defend my 4WD IFMAR World Championship at Yatabe Arena in Japan this year.

Source: LRP [lrp.cc]

February 24, 2015

Bradley Baird joins Alphaform Reds JQRacing team

Alphaform Reds JQRacing have announced the signing of Bradley Baird to their factory team. “THE Flying Irishman” has been in the JQRacing team for some years and he now secured a full factory deal to run Reds Racing engines, LRP electronics, AKA tyres, Savöx servos, GHEA Accessories and Maugrafix stickers in the year to come.

Source: JQRacing [jqracing.com]

February 24, 2015

T-Pro aluminium wheel nut wrenches

New from T-Pro come two aluminium wheel nut wrenches for the use with 14mm and 17mm wheel nuts. They are of a simple yet ergonomic design for effortless wrenching and separately available aluminium sockets allow to equip the black anodised aluminium handle with both the 14mm and 17mm tip.

Source: T-Pro [tproracing.com]