Red RC

June 3, 2014

Hupo Hönigl sweeps Austrian EP off-road nats Rd2

Hupo Hönigl sweeps Austrian electric off-road nats Rd2

The 2nd round of the Austrian 1/10th electric off-road nationals saw Team C’s Hupo Hönigl walking away with the TQ and win in both the 2WD and 4WD classes. Run at the TSA Krieglach track, Hupo took quite easy wins in A1 and A2 of the 2WD class allowing him to sit out A3. Philip Stocker finished 2nd, Martin Kreil completed the podium in 3rd. The 4WD class had again Hupo taking wins in A1 and A2 although he had quite a competition in the form of Team Associated’s Stefan Pfeifhofer in A2. Stefan then went on to take the overall runner-up spot from team mate Peter Pinisch by winning A3.

Click here to view the 4WD podium

June 3, 2014

Nejc Mihelic wins at Serpent Challenge Slovenia

The Serpent Challenge Slovenia was held last weekend in Tolmin, Slovenia in dry weather conditions although the weather forecast predicted rain interruptions. The race was held in 1/10th electric, 1/10th touring, 1/8th track, 1/8th, GT/Rally and 1/5th scale classes with a factory driver supported workshop on Saturday while Serpent designer Michael Salven was present for additional support. In the premier class of 1/8th on-road Jernej Vuga tookthe TQ in front of Nejc Mihelic and Michael Salven. Salven then took a time-out before the start allowing Mihelic and Vuga to run off. Vuga was able to hold a lead of a few seconds in front of Mihelic, but Mihelic managed to slowly catch on him. After 20 minutes Vuga ran into engines problems allowing Mihelic to take control of the race and to take the win in front of Salven and Vuga, who completed the podium.

Thanks to Mihelic for sending the report.

June 3, 2014

Edu Escandon wins Spanish 200mm nationals Rd2

The 2nd round of the Spanish 1/10th 200mm National Championships was held in Gijon in the North of Spain. Defending champion Edu Escandon took TQ honours, setting a new track record and being the only driver able to manage 16 seconds laps. Nacho Lopez was 2nd after the qualifiers and with Juan Hidalgo in 3rd and Sergi Franch in 4th.

Click here to continue reading

June 3, 2014

PSM B-Max2 MR carbon fibre chassis

PSM introduce this carbon fibre main chassis plate for the Yokomo B-Max2 MR. Machined in Germany from pure and high grade 2.5mm carbon material, the part is designed for outdoor use as it offers different flex characteristics than the stock aluminium chassis. The part weights in at 63.5g meaning a total weight saving of 50g compared to the kit chassis.

Click here to view more photos

June 3, 2014

Tom Cockerill wins at TORCH round of BRCA nats

This weekend the BRCA 10th Off-Road National series visited TORCH club in Titchfield, the deep South of England. A new venue to the 6 round national series for this year, having previously hosted an end of season final. The club had done a good job of laying a fairly open, race-able track, with plenty of features to keep drivers busy, but nothing too difficult that it was make or break for any level of driver. The national format sees just 2 rounds of 3 minute practice runs before drivers in to 4 rounds of qualifying and then finals, with just the A main having 3 legs to battle it out, 2WD on the Saturday and 4WD on the Sunday.

Click here to continue reading the report

June 3, 2014

More STRC B5 & B5M aluminium option parts

ST Racing Concepts have more aluminium option parts for the Team Associated B5 and B5M buggy available. First up is the rear chassis brace/camber link mount for the rear motor B5. Cut from high-quality aluminium, the camber link mount also helps with adding a bit more weight to the rear of the buggy when conditions call for a tad more rear traction. The rear camber link mount is also available as a variant for the mid motor B5M and retains all factory suspension geometry and ball stud locations.

Click here to continue reading

June 3, 2014

Salvadori doubles at Brazilian nitro on-road nats Rd2

The 2nd round of the Brazilian nitro on-road nationals was held at the Ajarc track last weekend, run in four different classes of 1/8th, 1/10th Open, 1/10th Touring/Sportsman and 1/10th Masters/35+. In the 1/8th class final, the strongest winning contender, Flavio Elias broke his car after start crash. Cesar Salvadori’s car was hit in the same incident and he ran with a damaged tire the whole race but this did not kept the KM driver from leading only until he crashed with a back marker, resulting in a damage to a steering block on his car. This cost Cesar the 1st place but with 2 minutes to go leader Eduardo Dulac suffered a battery failure on his Shepherd so Salvadori was able to take the lead again to cruise to victory.

Click here to continue reading the report

June 3, 2014

Boca Bearings rubber pit mat

New from Boca Bearings comes this thick rubber pit mat ideal for the garage tinkerer, and quick maintenance on-site and in the pits. Measuring 254x355mm it features a total of 7 recessed sections for holding and organising small parts and pieces. The sections of the mat have common dimensional conversions and built-in standard and metric rulers. The mat is easy to clean and protects surfaces from stains and damage while also being easy to roll up.

Source: Boca Bearings [bocabearings.com]