Red RC

March 29, 2014

Smokem 418-IIX chassis for the TRF418

Smokem’s latest performance chassis is the 418-IIX for Tamiya’s TRF418 touring car. Developed and tested with the help of a top TRF team driver, the 418-IIX chassis utilises a proprietary 2.0mm thick “Pro-Weave” 100 percent carbon fibre construction – which is stiffer than conventional weave but softer than a quasi weave. Together with its flowing contoured design, the 418-IIX chassis provides increased flex and a lowered centre of gravity, improving corner speed over a wider range of track conditions as the chassis already prove with a Smokem equipped car set the fastest overall time by a TRF418 in the modified class during the finals at the 2014 TITC race.

Click here to view another photo

March 28, 2014

AKA extends Evo line of 1/10th buggy tyres

AKA introduce new treads out of the Evo range of tyres in the form of the Deja Vu rear and Pinstripe 2WD and 4WD front tyre. Being compatible only with AKA’s Evo line of rims the tyres come in the company’s clay, soft and super soft compounds including red closed cell inserts with the Deja Vu also becoming available pre-glued on white or yellow Evo wheels.

Source: AKA [raceaka.com]

March 28, 2014

Martin Hudy talks RX8 – Exclusive Interview

As promised, today we are publishing the first of a series of features ahead of the forthcoming release of Xray’s all-new RX8 1/8 nitro on-road car. First up we have this exclusive interview with Xray designer Martin Hudy about the development of the RX8 and 1/8th scale market in general, and also the soon-to-be-released NT1 2014. Following that, some time in the middle of next week we will also have an exclusive write-up available with more in-depth information on what racers can expect from Xray’s new flagship 1/8 on-road racer.

Click here to read the interview

March 28, 2014

TRR TRF418 carbon & aluminium lower decks

German company TRR have three new main chassis plates for the Tamiya TRF418 available. First up is the CDE 1.0 cut from from purpose-made 2.2mm carbon fibre material. It offers a symmetrical design, a different shape compared to the kit chassis and machined openings under the diffs and the main gear. The second new chassis is the CDE 1.1, a chassis that basically is identical to the 1.0 but machined pockets under the diffs and main gear give different tweak characteristics to fine-tune the handling of the car. Both the 1.0 and 1.1 chassis are available from 2.0mm and 2.5mm material on request. Last but not least comes the CDE 2.0, a 2.0mm aluminium chassis. It arrived with a polished finish and may also come with a matte finish in the future. All three chassis require shorter inner hinge pins and come including a manual.

Click here to view the other new chassis

March 28, 2014

JConcepts RC10 WC shock tower & transmission brace

On time with the much awaited release of Team Associated’s RC10 Worlds Car JConcepts have two new carbon fibre option parts for the iconic 2WD buggy available. First up is a dedicated front shock tower that is cut from 2.5mm material. Sporting the Worlds Car’s wide track front end geometry it is a direct replacement for the stock part. Reinforcement ribs add strength and the shock tower is also usable on the narrow track width RC10 Classic kit. Also new is a 2.5mm carbon fibre transmission brace for the Worlds Car’s 3-gear Stealth transmission. An updated design adds rigidity to the rear end while adding a certain amount of “JC” bling to your ride. The brace fits the Worlds Car and all vintage RC10 with 3-gear Stealth transmission.

Click here to view more photos

March 28, 2014

Serpent pre-painted GT8 bodyshell

Serpent now have this pre-painted GT8 bodyshell for the Cobra GT and other 325mm “short” wheelbase chassis available. The body is made from high-quality polycarbonate and comes finished in an orange, black and grey colour scheme. Included is also a large rear wing to add downforce and that distinctive GT look.

Source: Serpent [serpent.com]

March 28, 2014

Novarossi introduce coloured Nova INS boxes

Novarossi recently introduced their new compact design 1/8th on-road INS box and now also have several colour variants available. The low-profile design silencer was originally announced as a standard black and new-colour red version but now also sees the addition of a white, green and tricolour variant for those who are tired of the usual black-only design.

Source: Novarossi [novarossi.it]

March 28, 2014

GRP 1/5th scale on-road bike tyres

Italian company GRP introduce their new line of tyres for 1/5th scale on-road bikes. Coming for the front and the rear they offer an optimised design without sharp edges in order to maximise the side bite and traction available. A newly designed carbon fibre reinforced rim does away with the need to run inserts for improved precision and a very true running wheel. A WMS called weight system allows to increase the weight of each wheel by using two, four or six stainless steel rings to up the rotation mass for improved stability and traction on low to medium bite tracks. The tyres are available in a medium, soft and super soft compound pre-glued on two different design wheels or as rubber only.

Source: GRP [grpgandini.it]