Red RC

July 18, 2013

ETS arrives at Hudy Racing Arena

Thurs-Track-4

The greatest R/C venue in the World, there is simply no other way to describe the Hudy Racing Arena in Slovakia. Built in 2006 on the grounds of a former soccer stadium, the massive 25,000 square metre facility also includes the factory of both Xray, the only true r/c car manufacturer in Europe, and Hudy but it is the Arena which dominates the grounds. Hosting its first international event this weekend as it plays host to the season finale of the Yokomo Euro Touring Series, the complex houses three tracks and from the moment racers drive in the main gate they can’t but be immediately impressed by what they see before them.

View our complete event coverage here.

July 18, 2013

On the Grapevine – Reims

In 2009 while covering the 1:8 Offroad European Championships in Austria I remember looking through the timing sheets to see what drivers i needed to talk with before I got to work on my latest report and mixed in with Europe’s elite Offroad drivers was a name I had not come across before. Asking around if anyone knew where I might find this Swedish driver I was directed to Frenchman Adrien Bertin. On finding Adrien, beside him was a small shy kid together with his dad. While this was my first encounter with Adrien’s then 13-year-old protege, this kid already knew about winning having just become the European B Champion. Having had to direct my question down at this little figure, with Adrien having to provide most of the answers, last weekend, 5-years on from my first encounter, I was directing my questions up at a much taller and confident driver asking him for his thoughts on a race that had just seen him become the 22nd member of Europe’s most exclusive group of racers.

Continue reading On the Grapevine here

July 18, 2013

Cody King & Ty Tessmann join Team Orion

Team Orion announce the signing of Cody King and Ty Tessmann to run the company’s electric components in order to be ready for the 1/10 Electric World Championships held at Silver Dollar Raceway, Chico, California later this year. Both drivers will power their car with Team Orion’s latest motors and speed controllers while Ty will also use the company’s chargers. Both Cody and Ty will have their first outing with the new equipment during this weekend’s Hot Rod Hobbies Schootout.

Source: Team Orion [teamorion.com]

July 18, 2013

MR..Roche TRF417 double joint driveshafts

Designed for the Tamiya TRF417 are these front double joint driveshafts from MR..Roche. The construction reduces wheel chatter at high steering angles and makes for a more efficient and smoother power supply. Made from high-quality spring steel the 44mm CVD shafts come with spring retainer clips, 5x10x3mm bearings and are a direct replacement for the stock parts.

Source: Roche [mr-roche.com]

July 18, 2013

Xceed aluminium setup tools

New from Xceed come several new setup tools in the form of chassis blocks, ride height, downstop and camber gauges. The setup blocks are 20mm high and ideally used when measuring 1/8th car body heights as per EFRA rule and they also come as set including the droop gauge. Available in two sizes are the camber gauges, the smaller for 1/8th to 1/12th on-road cars and the larger one for 1/8th GT and off-road cars. All tools re are machined from high-quality aluminium and come anodised in Xceeds signature green colour.

Click here to view more photos

July 18, 2013

Xray XB9E electric buggy announced

Xray introduce the XB9E 1/8th electric off-road buggy. The follow-up model of the long-running XB808E is based on the successful XB9 platform, making use of its gearboxes, drivetrain, suspension parts and shocks. The chassis though is developed from the ground up to create the optimum in weight balance, weight distribution and handling. The vehicle is based on a longer and wider 3mm 7075-T6 aluminium chassis with new side guards, a central battery mount and an updated – easy to remove – radio tray with sealed receiver box and carbon fibre servo mount plate. The 7075-T6 aluminium motor mount is of a sliding design and 2mm wider compared to the old variant for improved durability. Also new is the composite battery mount with higher barriers to securely fasten one 4S or two 2S LiPo battery packs while the speed controller finds its home on a large surface plate in-line with the battery.

Click here to continue reading

July 18, 2013

Tourex 1/10th buggy tyre gluing bands

Tourex 10th tyre gluing bands

Available soon are Tourex’ new tyre gluing bands for 1/10th off-road tyres. They are made from a flexible rubber material and are designed to press the tyre agains the rim while the glue dries in order to achieve perfect bonding between the two. Included in the set are four bands in red colour.

Source: RMV Deutschland [rmv-deutschland.de]

July 18, 2013

RPM B4 series front A-arms & bulkhead

The RPM front A-arms and bulkhead set is designed for all Team Associated B4 series vehicles including the newer B4.1 and B4.2. The wishbones sport an updated design with the hinge pin retaining screws now sitting in-line with the pins to overcome structural weakness issues associated with the original design. The arms are also a lot beefier that the stock items and come moulded in RPM’s genuine nylon compound for added rigidity. They are made to retain the stock geometry and also include a suitable front bulkhead.

Source: RPM [rpmrcproducts.com]