Red RC

July 25, 2013

Losi Drake & Phend Edition Mini 8ight

Losi Drake Edition Mini 8ight

Losi’s nifty little Mini 8ight brushless buggy is now available as an Adam Drake or Dakotah Phend Edition kit. The 1/14th scale vehicle makes use of many design cues also found on the ‘full scale’ 8ight buggy and features 4WD, long A-arms, high-volume shock absorbers and adjustable turnbuckles. The buggy is powered by a Dynamite 4500kv brushless motor and comes with a waterproof speedo and SR200WP receiver as well as a Spektrum DX2L transmitter. The package is rounded out by the pre-decorated body shell and rear wing sporting Adam Drake’s or alternatively Dakotah Phend’s signature designs.

Click here to view the features

July 25, 2013

JConcepts B44.2 aluminium steering bellcrank set

JConcepts B44.2 aluminium steering bellcrank

New from JConcepts comes the aluminium steering bellcrank assembly for the Team Associated B44.2 buggy. In the stock trim, the B44 steering swings an all moulded, plastic bellcrank system as well as a plastic steering rack supported by bushings. The JConcepts design includes an aluminium driving and driven bellcrank and incorporates a flat panel 2.5mm material as the steering rack with three locations for Ackermann adjustment. The new rack includes bearings for the system to glide on while long stainless steel ball studs provide the connection between the system and steering tie-rod. The servo-saver less aluminium bellcranks, that are available in blue or black colour, allow for a more precise steering feel with increased steering through less defection while the carbon fibre rack pivots freely on the bearing supported system allowing the driver to feel less drag and quicker response.

Click here to view more photos

July 25, 2013

RT announce option parts for the RB One R

Reckward Tuning from Germany announce new option parts for RB’s One R 1/8th buggy in the form of front and rear carbon fibre shock towers, vented fibre glass brake discs and a set of rubber-sealed ball bearings. Starting with the shock towers, the parts are CNC-machined in Germany from high-quality 5mm carbon fibre and designed to fit the One R buggy only. Both the front and the rear shock stay sport additional inner shock mounting positions for added tunability. Next up are machined fibre glass brake discs whose design and material makes for better stopping power and minimised brake fading. The discs are white of colour and a direct replacement for the stock parts. Last but not least comes a RS spec rubber sealed ball set. Included are 24 ball races, treated with high-quality grease for long durability and less maintenance.

Click here to view the other new parts

July 25, 2013

Hobbytech Sprint RTR nitro buggy

The new Hobbytech Sprint RTR is a factory-assembled ready-to-run buggy of race-worthy specification. Based on a 3-diff drivetrain the buggy offers a widely adjustable, race-oriented suspension with 16mm aluminium big bore shock absorbers, alloy shock towers, adjustable turnbuckles and front CVD driveshafts. A GO21 3.5cc engines is already installed as are genuine Savöx metal gear servos, a polished tuned pipe and a 1400mAh 5-cell NiMH receiver batter pack. This all is covered by a pre-painted cab forward body shell and included with the vehicle comes also a digital 2.4GHz pistol grip transmitter and grippy tyres on black multi-spoke rims.

Click here to view the features and more photos

July 25, 2013

Wheeler & Lutz score at Futaba Nitro Challenge

The Futaba Nitro Challenge was run at the Dirt Burners track in St Louis in most of the important 1/8th classes and saw Team Durango’s Ryan Lutz being the fastest in Pro Buggy qualifying. The double A mains saw Xray’s Josh Wheeler taking A1 with Carson Wernimont, Mark Pavidids, and Ryan Lutz taking the following position. Wheeler had another great run in the deciding second A main and wrapped up the overall championship. In the Pro Arena Truck class, more commonly known as Truggy, top qualifier was the always fast Ryan Lutz. AKA teammate Josh Wheeler was able to take the win in A1 but Lutz came back to take the win in A2 which gave him the championship for Arena Truck. Electric 1/8 Buggy saw Lutz being TQ, followed by Wernimont and upcoming driver Dylan Gerard starting 4th on the grid. Bad luck would plague Wernimont and Gerard, causing them to retire early but Lutz would prevail and go on to take the win in the 10-minute main.

Source: AKA [raceaka.com]

July 25, 2013

Cavalieri & Gahan win at 2013 HRH Off-Road Shootout

The 16th annual Hot Rod Hobbies Off-Road Shootout saw Team Associated’s Ryan Cavalieri taking the winning honours in the Modified 2WD Short Course class. Starting from the second position on the grid, Ryan made quick work by getting around Team Associated team mate and TQ Ryan Maifield in both A1 and A2, clinching the overall win and sitting out A3. TLR’s Dustin Evans came in second while Cavalieri’s Associated team mate Ryan Maifield completed the podium. In Super Stock Buggy TLR team manager, Kevin Gahan was looking good all week, taking the TQ of the class. Gahan would go on to win the first two of three mains, and watch the final main as the overall was already his.

Click here to view the Super Stock Buggy podium

July 25, 2013

Mibosport steel and ceramic ball bearings

Mibosport introduce their new line of standard and ceramic high-performance ball bearings. Coming in two specifications as red rubber sealed standard steel ball races and orange shielded ceramic ball variant, both of them are lightly oiled to further reduce friction and to improve performance. The bearings are available in sets of four or as complete car kit.

Source: Mibosport [mibosport.com]

July 25, 2013

EZ Power Kicker brushless motors

Italian company Italtrading introduce the new EZ Power Kicker brushless motors. Coming in a rebuildable gun metal anodised aluminium can, with adjustable timing and heavy duty solder tabs the motors are available from 4.5T to 13.5T and are build using a 12.5mm all-purpose rotor. A 13mm high torque rotor is available separately.

Source: EZ Power [ezpower.it]