Red RC

November 29, 2012

Maxi Vogl wins German Open Indoor Masters

Shepherd driver Maxi Vogl won the German Open Indoor Masters the second time in a row in front of his team-mate and 2012 German vice-champion Daniel Sieber. The race took place at the “Faszination Modellbau” fair in Friedrichshafen in the very South of Germany and attracted 35 drivers in the 1/8th scale class. Unfortunately the race was overshadowed by a bad accident during the main final. On Friday the track was open for free practise and both Shepherd drivers had a good pace already. The qualifying was held on Saturday and Maxi and Daniel showed a great performance. At the end it was Maxi taking the TQ less then 0,1sec in front of his fast team-mate Daniel with both drivers being the only one to reach 18 laps in qualifying securing themselves the pole-position in the semi-finals.

Continue reading the report here

November 29, 2012

Serpent Cobra 2.0 Buggy rear shock tower

From Serpent, for the 1/8 Cobra 2.0 Buggy, comes this lightweight rear shock tower. Machined from 7075 T6 aluminium, with titanium grey anodizing and Serpent logo engraving it weighs in at only 35 grams. The tower features 6 roll center holes and 5 for shock angle adjustment.

Source: Serpent [serpent.com]

November 29, 2012

VBC Racing WildFire option parts

VBC Racing have introduced a number of new option parts for their WildFire touring car. First up are this lightweight CVD shafts made from 7075-T6 aluminium and hard treated. They are over 50% lighter than the standard steel axle and they come in a pair together with self lubricating 3.5mm shaft end shoes. Also part of the drivetrain are the new lightweight hardened steel gear diff axles which have been heavily machined for weight loss yet maintain their strength. The ‘EX Slide’ ceramic ball bearings set contain high quality red rubber seal ceramic bearings of 4pcs of 10x15x4mm, 8pcs of 5x10x4mm & 2pcs of 5x8x2.5mm. Friction is reduced to near zero, so your car acceleration and top speed will be even better. Finally their is new version 2 composite steering blocks.

View the other new products here

November 28, 2012

Reedy 350mAh 7.4V LiPo RX battery

Reedy’s 350mAh 7.4V LiPo RX battery is perfect for use in 1S powered 1:12 and 1:10 pan cars that require a receiver battery, or in applications where the use of a receiver battery is advantageous. The battery features an integrated switch so that the car can be powered on and off conveniently. Thanks to a separate non-switched charging jack, the battery can remain plugged into the receiver during the charging process. A 350mAh capacity is good for a typical day’s worth of pan car racing. Start the day charged and run two qualifiers and a main event without having to worry about re-charging. Weighs in at 13 grams.

Source: Reedy [teamassociated.com]

November 28, 2012

Adrian Berntsen win Rd2 of Norway Indoor Nats

The 2nd round of the Norwegian national indoor series was held in Gjovik last weekend. All of the best modified drivers in Norway were attending the race which increased the level of the race and made it even tougher to make the A-main, and also making it harder to make the podium. After qualifying it was Adrian Berntsen who took the TQ spot being the only driver to make a 30 lap run. In second was Tom Erik Haaversen, while Petter Berntsen took the 3rd spot. The gap between Tom Erik and Petter was 0.142 seconds. In the first two finals it was Adrian who could take two easy wins and claimed the 1st place overall. Talented Oskar A. Fjeld drove two impressive finals battling both with Petter and Tom Erik to take the 2nd place in both of the two first finals. Petter Berntsen took 3rd in the first final, while the newly crowned 1:10 2wd buggy Norwegian Champion Niklas Bjørkå-Roos took 3rd place in the 2nd final. In the last final Adrian was having a safe lead, but after rolling on the curb in the last minute, Petter was able to overtake the lead and in the end finished right ahead of Adrian, taking an important win in the last final to take the 2nd place overall from Oskar.

Source: Xray [teamxray.com]

November 28, 2012

Elangears Cronus 400S power supply

Elangears have updated their Cronus power supply line up to include the 400S. This 400W unit features an output current of 30A and a fresh new look. The 400S also features an updated USB port outputting 5V at 1.5A, suitable for charging your iPad.

Source: Elangears [elangears.com]

November 28, 2012

Speedpassion F-68 1/10th scale F1 body

Speedpassion have released their new F-68 1/10th scale Formula 1 body. The new F-68 body takes customization and tuning to a new level in the rapidly growing 1/10 scale F1 racing segment. Racers can mix and match the included 4 interchangeable nose profiles and 2 interchangeable rear fins to create their own personalized F1 car. Along with the different front nose profiles and rear fins, the body includes a driver’s helmet, double-sided tape, a decal set and assembly instructions. The F-68 body fits all popular 1/10th scale racing chassis on the market.

View more body images here

November 28, 2012

Exotek RB6 alloy shock post set

More new products for the RB6 with Exotek releasing this alloy shock post set for the Kyosho car. The secure threaded posts offer quick adjustments and are precision machined for perfect fit onto the shock caps. Includes rubber rings to keep the shocks in place and to protect the factory red finish. Fits a 7mm wrench, same as the wheel nuts.

Source: Exotek [exotekracing.com]