Red RC

October 17, 2010

STRC Ultima option parts

New from STRC for the Kyosho Ultima range of products, including the SC, SC-R, DB, RB5 & RT5, is this complete range of optional products. First up are these CNC Machined aluminium front braces, that will solve the front suspension brace problem on your Kyosho off-road vehicles. The stock brace is held in by the bumper and constantly moves around and can come loose if the front bumper bends or breaks. This front brace incorporates O-rings where the hinge-pins pass through, thus providing a snug fit on the hinge-pins and is less likely to come loose. Next up are aluminium bulkheads that carry the same adjustability of 25 or 30 deg. front kick-up as the stock plastic piece, but offers far superior durability.

View more product information here

October 16, 2010

Hot Bodies Megagrid & Beams 1/8th tires

Hot Bodies have a number of new tire releases for 1/8th scale, starting with the Megagrid. Suitable for a wide variety of off-road and on-road surfaces including loose topsoil right on down to hard-pack, this is our most versatile tire and should be used when you go to a new track because it will be a good starting point everywhere. With interlocking lugs that feature varied step height and a medium gap, these tires provide high bite even in the worst of conditions. Available in Pink, Red and White compounds. The HB Beams are suitable for hard & dry off-road surfaces such as hard-packed clay and ‘blue groove’ high bite conditions and also work great on indoor tracks. With criss-cross bars crossing the tire and small bars in between they resemble an unfinished skyscraper in appearance. Scraping up traction where there is none. Now available in Pink and Red compounds.

View the Beams here

October 16, 2010

Roche touring car wing

Roche have released this new rear wing for use with 190mm 1/10 EP Touring car shells. Claiming to improve the handling of car, it will give better traction when racing on low grip surface. Designed to fit within IFMAR/ROAR approved sizes, which is 190 x 20 x 40 mm, they are made from 1.2mm thick lexan and will fit any sedan body shell that has wing struts.

Source: Roche [roche.hk]

October 16, 2010

Volker is Top Qualifier in Kastellaun

Ronald Volker has secured the overall TQ honours for the opening round of the 2010/11 Yokomo Euro Touring Series as he continued his domination of proceedings in the penultimate qualifier. The European Champion recorded the fastest 5-minute run of the event putting pole position for tomorrow’s finals beyond reach of his rivals. The German switched from a gear diff to a ball diff in the back of his Yokomo BD5 which improved stability through the sweeper but create understeer out of the hairpin but overall the car felt safer to drive.

View our full ETS coverage here.

October 16, 2010

Stéphane Bouche wins Coupe de France

Last weekend the Coupe de France 1/8th scale on-road took place at the LMRC track in Limoges in the center of France. In total the race saw 136 drivers in attendance, the biggest participation for 10 years. Among them were Stéphane Bouche and recently crowned French champion Richard Volta racing for the French Shepherd team. On Friday and Saturday the weather was fine but on Sunday dark clouds covered the sky. Richard Volta was again in good shape and secured himself the pole-position, Stéphane Bouche was ranked on 10th position after qualifying. For this race there were no direct finalists and just 5 minutes before the start of the semi-finals the rain arrived so the conditions were really difficult for all the drivers. Bouche and Volta both managed to bump up to the final after a save 20 minutes drive. At the start of the 30 minutes long final Bouche had a tough battle for the lead with Sebastien Zalta who likes these conditions. After 10 minutes Bouche took over the lead and increased it lap by lap. At the end of the final, it was Stéphane Bouche with his Novarossi powered Velox V8 who took the victory 1 lap in front of Sebastien Zatla with brother Laurent Zalta finishing another lap down.

Source: Shepherd [team-shepherd.com] / Image: Automodelisme.com

October 16, 2010

Sanwa SRG-BL servo

With the brand new SRG-BL servo, Sanwa now offers the new SSR signal transmitting technology also in sensationally small dimensions. With super fast transmission and response times the servo’s brushless motor uses high-quality, maintenance free and extremely long-life brushless technology. Due to its small size, it can be mounted in every R/C car chassis without any problems. Weighing in at only 44g, it makes the SRG-BL the perfect servo for touring cars.

Source: LRP [lrp.cc]

October 16, 2010

Volker opens qualifying with TQ run

Qualifying for the Xenon Modified class got underway this morning with Ronald Volker taking the first TQ run here in Kastellaun, German. The Yokomo ace ended the five minute run well clear of the opposition with Freddy Sudhoff just over 5 seconds adrift with the second fastest time. Volker said it was definitely a good way to start the day but admitted his car was still difficult to drive and he was having to drive a very fine line which on this occasion was possible as he faced no pressure from other drivers during the heat.

View our full ETS coverage here.

October 16, 2010

Dynamite 6.6V 220mAh Li-Fe RX pack

These new Dynamite 6.6V 220mAh LiFe Receiver packs were designed specifically for 1/12th scale on-road enthusiasts looking for increased power over traditional NiMH packs. These packs are lighter than standard NiMH and include an on/off switch for ease of use. LiFe chemistry makes the batteries safer than conventional LiPo batteries but offers the advantage of decreased weight versus NiMH packs providing improved power to weight ratio.

Source: Dynamite [dynamiterc.com]