Red RC

October 14, 2009

Recio wraps up Argentinian title with Rd3 win

Last weekend saw the third round of the 1/8th scale Campeonato Argentino take place in Córdoba, host track of the 2007 World Championships. Pole position for the race went to Mugen/Sirio driver Sebastián Recio, who converted his starting position into the win. Runner up on the day was team mate Agustín Cutini with third place going to Serpent driver Francisco Rinaldi. After this race the Championship standings saw Sebastián Recio take the title followed by Agustín Cutini, with Juan Ignacio Matticoli in 3rd.

Thanks to Roxana Palazzo for the report.

October 14, 2009

Statement from World Champion Martin Achter

Having done the double at last week’s poorly attended IFMAR World Championships in South Africa, Team Durango/CS team driver Martin Achter got in touch with us with a short statement following his arrival back in Germany.

I’m back again at home from the Worlds in South Africa. It was a really well organised event and the track was awesome! I really have to thank my sponsors Team Durango, CS-Electronics and Hoeco. And to say something about the safety of this Worlds, I think no one felt ever unsafe, on and off the track. I enjoyed the time very much in SA, very friendly and helpful people at the track. I will never forget this event!

October 14, 2009

Tekno RC D8/T & Losi wing mount & Shock towers

Tekno RC have announced some hot new products for the Losi 8 and Hot Bodies D8 line of 1/8th scale vehicles. First up is the new adjustable wing mount for the Losi 8B/8T (and D8/D8T/Ve8). A direct fit for the Losi it is made from an extremely durable plastic composite and has adjustable angle and height. No more body clips to hold on the wing, instead screws take up this task for a tightly fitted wing. The new wing mount is also designed to fit the Hot Bodies D8/D8T/Ve8/Vorza line using of one of their 3 new shock towers. The new rear shock towers are machined from 5mm thick 7075 T6 aluminium and are lighter and stronger than stock and are hard anodized for a sleek appearance. By using the bulkhead as an attachment point for the wing rather than simply attaching it only to the shock tower, the new wing mount and shock tower combo is far more durable than stock. Finally there are two separate towers for the D8/Ve8/Vorza buggies, a standard stock replacement and one for the optional 112mm shocks. All of these shock towers accommodate the new Tekno RC Adjustable Wing Mount, the stock wing mount, or the Losi 8 wing mount.

Click here to see the shock towers

October 14, 2009

Elite RC Electric motor mount

Elite RC have announced the release of their new unique electric motor mount for brushless conversions of gas cars, this one for the MP9. The slide and lock design means there are no gaps and so the motor block has full contact with the mount and so it will not bulge, giving a perfect mesh every time. Machined from solid aircraft grade 7075 T7 aluminium it is very rigid and can handle all the torque from the motor, but despite its strength it weighs in at little over 2oz. Another unique design feature is the 5x10mm bearing built into the motor block for extra shaft support and less flex, which reduces stress on the front motor bearing. Finally its 1 screw lock design clamps the sliding contacts together merging the two parts together to form 1 sold mount. Elite RC have also mentioned that they will soon release a fully adjustable battery tray as well as their own electric chassis.

Click here for more photos of the mount

October 14, 2009

Branson wins BRCA 1/8th Rd9, Wood retains title

Round 9 of the Championship was held at the Cotswold circuit which is located on the Kemble Airfield. A good turn was expected for this the championship decider. This season, the battle for top honours was between the Serpent drivers of Wood, Hicklin and Green. With Green winning 4 of the previous rounds but having to count a very low score, required him to win this race and hope that Wood is out of the top 3 and Hicklin does not finish higher than 3rd. The remaining drivers had to push hard to try and disrupt the overall outcome above.

Continue reading the report here

October 14, 2009

Mike Truhe spotted testing new Powerplant

We have received word out of California that former ROAR National Champion Mike Truhe was recently spotted testing a new power plant in his Losi buggy. The new motor was seen being used in his 8ight chassis and is a departure from the usual Alpha unit that the Team Orion driver normally uses, for starters sporting a black cooling head in place of the familiar red unit. The test was part of Mike’s preparations for this week’s Nitrocross race in Arizona where our source believes he will debut the new engine. Having lost their previous GRP engine tie up, when the Italian company ceased production earlier this year, this new motor could be the result of a bigger plan by US company Horizon Hobby, who own Losi, to once again link up with a major competition engine manufacturer. We will keep you informed as we know more.

October 14, 2009

Reedy 5S 18.5V & 6S 22.2V Competition LiPo packs

Reedy’s hard case 40C 1:8 LiPo batteries are now available in 5S 3800mAh 18.5V and 6S 3100mAh 22.2V configurations for those who want the added efficiency that higher voltage delivers. These batteries fit perfectly in Team Associated’s RC8e, SC8e, and RC8Te and are suitable for use in many other chassis’. For minimum resistance and maximum power delivery, 10-gauge wires are pre-wired and ready to add your favorite connector. Balancing harness makes balancing and balance charging simple and convenient while a hard case helps protect the batteries from crash damage.

Click here to see the 22.2V pack

October 13, 2009

RB Speedline 1/12th scale tires

RB have released their new Speedline front and rear tires for 1/12th scale racing. Made from the best available foam for carpet racing, with incredible grip and traction. The tires are glued on lightweight white rims, delivered in pairs and available in grey, magenta, pink and white.

Source: RB [rbproducts.com]