Red RC

December 24, 2008

ProTek range of LiPo packs

A Main Hobbies have announced a new range of ProTek R/C brand Lithium Polymer battery packs as well as new clutch bell housings. Available in 3200mAh of capacity with a 25C constant discharge rate, 3800mAh of capacity with a true 30C constant discharge rate and a 4900mAh of capacity with a 25C constant discharge rate. These 3 packs include a balance charge lead with a Deans style T-plug installed. The balance adapter included is a 4-pin Align/E-Flite style XH balance connector. These battery packs are built using a hard plastic pack that is required for use at ROAR sanctioned tracks and events. Also new for your starter box is a 4-cell 2200mAh 15C power pack. This pack has T-Style Ultra connectors pre-installed, and comes with a 5-pin Align/E-Flite style balance connector. Finally from ProTek are these hardened clutch bells, which are precision cut, hardened and anodized black to give you the best maintenance free performance. There are three different lines of clutch bells available. The PTK-700x lineup are designed to fit Kyosho family vehicles and come in sizes ranging from 13T to 17T, the PTK-705x lineup are designed to fit OFNA and Mugen family vehicles and come in sizes ranging from 13T to 17T, while the PTK-706x lineup are designed to fit Team Losi 8ight family vehicles and come in sizes ranging from 13T to 16T.

Click more to see the other products… content

December 24, 2008

Tekin RX8 1/8th scale brushless ESC

Tekin have announced the release of this new 1/8th scale brushless ESC called the RX8. Based off of the proven RS series Speed Control the RX8 takes large scale current demands in stride. An industry front runner not only in power handling ability but also size and features with Drag Brake, Neutral width, Throttle Profiles, Voltage Cut Offs for LiPos and much more. The RX8 sits at only 1.5″ x 2.22″ x 1.46″, a small foot print making it easy to install on any chassis.

Source: Tekin [teamtekin.com]

December 23, 2008

Borja Hernandez joins RB Engines

RB Engines have confirmed that Spanish Hobao driver Borja Hernandez, a World finalist and 2 time podium finisher at the European Championship, has joined their international team. The former GRP driver, Borja chose RB engines as he believes it will help increase his perfomances and results for 2009 season.

Source: RB Products [rbproducts.com]

December 23, 2008

CS Electronic Twilight Evolution lamp

CS Electronic have released a second version of their popular Daylight, called the Twilight Evolution. Featuring the same functions as the original version, with an adjustable light angle of 85 to 170 degrees & 13W energy saving fluorescent tubes, this new version can also be powered by a 9V battery. Still able to be powered by 220V, the lamp closes down for easy storage.

Click here for more pictures… content

December 23, 2008

H.A.R.D. Racing Truggy Setup system

H.A.R.D. Racing have expanded their current line of setup tools to include a 1/8th scale truggy setup system. Precision machined from aluminium plate, and hard coated, this system is similar to previous versions from the company which has the side plate attached to the main plate by the lower side knob. On conventional systems where the 2 plates connect at the top point, sometimes the main plate cannot move freely and it may cause some accuracy problems. Sold in a set of 4, for each corner, they are supplied in a handy carry case and can be assembled and disassembled with ease.

Source: H.A.R.D. [hard-racing.com]

December 23, 2008

HongNor X2 1/8th scale buggy

The follow up to the X1, HongNor have released the X2, developed using feedback given to them by their team drivers, in particular from those in the US. Jay Halsey from Jammin, had spent a lot of time testing and came up with this world class buggy for the 2008 World Championships. The intention was to have a very fast low weight car without sacrificing the durability of the model. The car is stronger than most models on the market and while the steering geometry has not been changed, the weight distribution has. The chassis is narrower with the engine moved forward and more to the center, they have gone away from the center universals and added light-weight aircraft grade alloy center drive shafts. The Center differential mount is the same design as the optional aluminium mount but is now made from a lighter nylon to save weight. The Front and rear towers are a 4mm carbon fibre further reducing weight and the company’s new BT-118 tires and ultra light wheels are included and are proving to be a popular wheel and tire choice. Also included is their optional long life silver clutch shoes and 16mm big bore shock absorbers along with the suggested springs to suit. Finally a new body has been designed for this model with a separate nose cone.

Click more to read the specs… content

December 23, 2008

VP Pro sign George ‘T-Mizzle’ Drake

VP Pro sign George 'T-Mizzle' Drake

VP Pro have announced the signing of US off road racer George ‘T-Mizzle’ Drake. For the 2009 season Drake will run the Asian Champion VP Pro tires on his World Champion Hot Bodies D8 chassis, which is powered by GO engines.

Source: VP-Pro [vp-racing.com]

December 23, 2008

JConcepts Illuzion Truth Body wraps

We recently wrote about the new JConcepts Truth shell for the Traxxas Slash, now the Florida based company has released 2 body wraps for the same body. As well as a red coloured wrap JConcepts has teamed up with the apparel wizards at Good Run Gear to offer an officially licensed GRG off-road truck body wrap. Let the Truth body wrap completely redefine the look of the Slash and look like an official off-road truck while tearing up the local track or neighborhood. Simply spray on a simple 1 or 2 color paint job and apply the GRG / JConcepts wraps and you’re off to the races with a unique looking off-road truck body.

Click more to see the body wraps… content