Red RC

September 15, 2008

John Ermen wins Dutch 8th Nats Rd5

The 5th round of the Dutch 1/8th scale nationals was just held in Gouda, a very tight and small track in the centre of the Netherlands. The weather on Saturday was a bit disappointing, because of rain the practice was reduced to only 2 hours in the afternoon. On Sunday the weather was a lot more forgiving and the sun was shining but still a bit cold because of the wind, but this was good for fuel consumption. Qualifying saw Mugen racer Rick V take the pole position ahead of Serpent racer John Ermen in 2nd, with Rik Veenma and Miquel Hereijgers rounding out the top 4. After some semi final action Ilia van Gastel and Daniel van der Drift, who both experienced some difficulties during qualifying, also lined up in the final together with Joey Sorber, Peter Ceysens, Marcel Schouten and Arie Manten.

Continue reading… content

September 15, 2008

Jason Frost wins UK 1/8th Nats Rd8

The 8th round of the BRCA 1/8th scale National championships took place last weekend in Mendip. Qualification was extremely close with 4 seconds separating the top 6 places. Neil Diver and Andy North set the early pace in round 1, just failing to make 20 laps after Mark Green suffered from radio problems. In round 3 with the track slower due to higher temperatures, Mark Green made 20 laps to take TQ. In the final Mark blasted away and created a small gap. Andy North was in second but ended up down to last after a racing incident, while up front Jason Frost was catching Green waiting for a little mistake which happened and dropped him down the order. Tim Wood was then on a charge but just not quick enough to catch Jason who came home first for his second BRCA victor, stopping the Serpent domination of the Championship so far this season, while Chris Heath continued his consistency with a comfortable 3rd place finish.

Thanks to Andy North for the report and pictures.

September 15, 2008

KM Racing NT1 Aluminium pulleys

KM Racing have released a number of new pulleys for the Xray NT1 chassis. Available in 18T, 19T and 25T versions, all pulleys are made from hard anodized aluminium so they are lightweight and strong and their design and coating helps prevent the build up of dirt and debris.

Source: KM Racing [km-rc.com]

September 14, 2008

LiveRC at the 2008 IFMAR Buggy Worlds

LiveRC.com have been in contact to tell us they will be broadcasting the 2008 IFMAR 1/8th Off-Road Fuel Buggy World Championships live to viewers around the world. The broadcast will start on Monday September 15th beginning at 10am EST. LiveRC will be adding many new and exciting features to the broadcast with the purchase of the All Access Pass. Exclusive features for All Access Pass holders for the IFMAR 1/8 IC Off-Road Worlds include:

– Ten LiveRC.com team members on site exclusively for best possible coverage
– Expert announcers Scotty Ernst and Charlie Suangka bringing you live, corner-by-corner action throughout the broadcast.
– Seven fixed-position cameras and three high-definition cameras will be following the action, which allows you to follow the action better than ever – even better than being trackside because you won’t miss a turn!
– Three producers will be rotating shifts on our audio/video switchboards to bring continuous lap-by-lap audio and video coverage throughout the event.
– Two dedicated, redundant servers are reserved exclusively for All Access Pass viewers to ensure the highest broadcast quality and reliability.

All Bonus Lap members will still enjoy the same great features that have always been provided by LiveRC, but if you’re a big fan of 1/8 off-road racing and you want the best coverage of this historic event, don’t miss out on the extra features only available with the All Access Pass.

Full information can be found here.

September 14, 2008

SMP Racing V-One RRR & MRX-4 parts

Swiss company SMP Racing, makers of the Slide 1/8th scale chassis which is no longer in production, have aimed their sites on the manufacture of aftermarket parts. Focusing on lightweight performance parts, they have released some new wheel axles for the Kyosho V-One RRR Evo, one pair made from titanium, weighing in at 6 grams and another set made from hard coated aluminium weighing 3 grams. Also new is a hard coated aluminum servo saver shaft for the Mugen MRX-4, which also weighs only 3 grams.

Click more to see the other products… content

September 13, 2008

Reedy Wolfpack 3600mAh 9.6v pack

Reedy Wolfpack 3600mAh 9.6v 8-cell pack

Reedy have released a new version of the popular Wolfpack 3600mAh battery pack which is now available in a version featuring a whopping 9.6V of pure power. Assembled using Reedy’s 3600mAH high-tech SC-R cells in a configuration that drops straight into the Traxxas Slash, it comes supplied with a Traxxas High-Current Connector to deliver power to the ESC with less resistance and heat than ever before. To further minimize power-robbing resistance and heat, welded connections between each cell and thick 14AWG silicone power wires ensure maximum performance and reliability.

Source: Reedy [rc10.com]

September 12, 2008

Keisuke Fukuda wins Japanese 10th Nats

The Japanese 1/10th scale 200mm Nationals took place last weekend at the Hokusei circuit track in the centre of the country. Practice was hampered by rain with drivers getting very little running prior to the start of qualifying, which was held in dry conditions. It was Kyosho racer Takaaki Shimo that took the TQ spot ahead of former World Champion Keisuke Fukuda in 2nd, Yuya Sahashi in 3rd and Shinnosuke Yokoyama 4th. The 40 minute Open class final saw a very close battle at the front between the top 2 qualifiers and it was Fukuda who eventually came out on top for Mugen, taking the win and finishing less than 2 seconds up on Shimo who finished 2nd, while Xray driver Hiroki Fujita took 3rd.

Source: Central RC [centralrc.co.jp]

September 12, 2008

King Headz XB808 motor mount

King Headz have released this CNC machined 7075 aircraft grade aluminum engine mount for the Xray XB808. Designed with a base mount and removable top blocks, once installed in the vehicle and the gear mesh is set you can remove and reinstall the motor without resetting the mesh. Suitable for both a Nova based or Picco based motor, the mount has an extended leg that will help to reduce chassis flex near the flywheel hole. The top blocks are also available separately.

Source: King Headz [kingheads.com]