Coming from Avid is a carbon fibre battery brace for the Tekno RC Eb410 buggy. The part is made from 100 percent carbon fibre and designed for easy balance plug access no matter how it is installed. The brace works with stock or aftermarket hardware and is available separately or including a black aluminium thumbwheel. Source: Avid [avidrc.com]…
…grabbed Q2 with 12 laps 5m 25.51s with his Tekno EB410. However, Q3 will be the round to produce all top 3 qualifiers. Mizan drove his Serpent with a very clean 12 laps 5m 14.77s to snatch TQ with Bashir making the 2nd place on the grid with his Xray. Hakeem completed 3rd on the grid driving an SWorkz buggy. It is somewhat of a challenge to drive 2WD buggies on this outdoor dirt track but that did not stop anyone from putting up a good fight for the overall win. Foong drove a good race to secure A1 with…
VRP have introduced a suspension droop gauge purpose-designed for the Tekno RC EB410 buggy. The tool does away with the need to use callipers to measure suspension droop, instead it slips over the top shock nut and the droop setting is easily readable on the black anodised ruler with white lettering. The USA-made tool is made from high-quality 7075 aluminium and is available now. Source: VRP [visionracingproducts.com]…
Exotek have released a first teaser image of their forthcoming EB Edge body shell for the Tekno RC EB410 1/10th 4WD off-road buggy. The shell is of an all-new design and despite offering a low slung appearance it will allow to run the top-mounted motor cooling fan. The shell will hit stores by the end of February. Source: Exotek [exotekracing.com]…
Coming from Avid and made for the Tekno RC EB410 buggy are several new option parts. First up is a 4-piece set of FastTune titanium shock standoffs that allow to use a common 1.5mm Allen wrench to prevent the standoff from spinning while using a 5.5mm socket wrench on the other side. The parts are machined from billet 6Al-4V titanium and weight in at about 1.07g per piece which scrubs valuable weight from one of the highest parts of the chassis. Next up are titanium lower shock screws for the EB410. This screw set offers two left and two right…
Following the introduction of the new lower front wing and nose cone set for the Team Associated B64 buggy, JConcepts now also have a variant for Tekno RC’s EB410 wheeler available. The lower wing is an option to the tower mounted front wing that has shown to produce enhanced steering characteristics. The package includes the lower front wing and the nose cone on the same mould. The nose cone is similar to what would be found on a 1/8th off-road buggy. The lower front wing can be painted, left clear or frosted for the desired look, fit and finish. Recently,…
JConcepts have introduced their new F2 body shell and front scoop for the Tekno EB410 1/10th 4WD buggy. Starting with the body, the lid’s design is based off of the original Finisher body but the F2 provides an even more aggressive look with an increased windshield angle that provides a steady force upfront during mid-flight wind gusts on large jumps and simplified side pods to remove unwanted changes in height. The narrow rear-end of the Tekno played a role in the look and feel, however, the JConcepts designers wanted more. The team incorporated a high-end floor feature which aggressively provides…
Coming from MIP and made for the Tekno RC EB410 1/10th scale 4WD buggy is a new aluminium Ackermann plate. The part is machined from U.S. grade 7075-T6 aluminium for strength and it c0mes hard-anodised for wear. The rigid structure ensures consistent steering characteristics and the plate is available for pre-order now. Source: MIP [miponline.com]…
