Red RC » P Off Road

February 23, 2018

Kyosho RB6 carbon composite bulkhead & upper plate

Kyosho have introduced theRB6 buggy’s front upper bulkhead and upper plate in a new carbon-reinforced composite material. The parts will flex less than the standard items, for a more linear and precise steering feeling on various surfaces, with the effect fully unfolding on high to very high bite tracks. The parts are available separately and they are usable for the latest RB6.6 buggy as well as the older spec RB6, the RT6 stadium truck and SC6 short course truck.

View the upper plate here

February 23, 2018

RPM E-Rustler rear bumper kit

RPM have introduced a rear bumper kit for the electric variants of Traxxas’ Rustler 2WD monster truck. The bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas wheelie bar. Additionally, if owners decide to run without the wheelie bar, the bumper is so versatile, it’ll adapt and allow either configuration. The part is designed tough, with serious impact absorption characteristics built in. With the use of the optional RPM Rear Bumper Mount, the protection for the motor becomes nearly indestructible. The bumper is made of engineering grade nylons and comes in black or blue colour.

View another image here

February 22, 2018

X-Grip M3 titanium screws

European X-Grip distributors Mikimodel have introduced a new range of high-quality titanium screws. The M3 fasteners are available as countersunk and button head variants and come in various length including 6mm, 8mm and 10mm. The screws are available in packs of ten from now on.

Source: Mikimodel [mikimodel.net]

February 22, 2018

Airflow Laminar RC8B3.1 buggy body shell

Airflow RC Racing Bodies from Italy have introduced the new Laminar buggy body shell for the Team Associated RC8B3.1. The special design, that shows very flowing lines, will make for a more neutral handling buggy especially at higher speeds and while jumping. In addition the body stands out from the current trend of “boxy” lids and it is usable also on the electric-powered RC8B3.1e buggy. The body comes moulded from clear high-quality polycarbonate and it is available now.

View more images here

February 22, 2018

Kaja Novotny takes double Mibosport Cup buggy titles

The final round of the popular Winter Mibosport Cup was held last weekend in several electric on-road and off-road classes. Xray’s Kaja Novotny snatched the runner-up spot in the 2WD class behind Martin Bayer and came out on top in 4WD and with these results and despite missing a round due to the IFMAR World Championship in China, he took the overall wins in both the 2WD and 4WD classes. In 2WD Team Associated’s Alex Bidovsky grabbed the overall 2nd place from young Max Götzl (Xray) in 3rd. Over in 4WD Peter Loncsar (Yokomo) and Adam Izsay (Xray) were tie on points with the better end for Peter, who would take the vice-championship title.

View the 4WD podium here

February 22, 2018

7075.it Air Killer shock & diff air remover tool

Coming from Italian company 7075 Special Parts is the Air Killer air remover tool for shock absorbers and gear differentials. The compact device will create a vacuum, without the need for an additional pump, that removes air bubbles that can occur in freshly-built shocks and diffs and that are known to hamper performance and consistency. The tool, made using high-quality 7075 alloy, sports an inner shock and diff stand for convenient use with flashy black and white graphics making it stand out.

View another image here

February 22, 2018

Exotek TLR 22-4 13.5 spec centre spool set

Coming from Exotek and made for the TLR 22-4 2.0 1/10th 4WD buggy is a 13.5 spec centre spool set. The super light slipper lock-out conversion greatly reduces the rotating mass of the 22-4 drive line for improved acceleration and lower motor temps which is needed in the very competitive 13.5 spec classes. The complete stock slipper assembly weighs in at 32g while the complete Exotek spool is only 19.7g. The axle is made of titanium to reduce weight but maintain durability and the locking plates are lightened polished aluminium. These eliminates the heavy steel shaft, slipper pads, springs and plates all while using the TLR spur gears and pulleys for easy replacement when needed. Due to the lightweight nature of the conversion it is recommended for 13.5T and 17.5T motors.

View more images here

February 22, 2018

PSM A215SV carbon fibre shock towers

PSM from Germany have introduced two carbon fibre shock towers for the popular Agama A215SV buggy. The front shock stay is machined from 5mm high-quality carbon fibre and was designed for heavy duty use thanks to its durable design. It features PSM’s unique double stacked rip machining for cool looks and a lower weight. The 4mm rear variant was developed to simplify vehicle setup while improving traction characteristics and it also spots a double stacked rib design. Both shock towers are available separately from now on.

View the rear shock tower here