Red RC

March 17, 2020

RC Maker T4’20 SlimFlex carbon fibre chassis

Coming from RC Maker and made for the Xray T4 2020 mid-motor touring car is the new SlimFlex carbon fibre chassis. Tested and developed for over six months by RC Maker’s team drivers, the chassis will offer improved handling especially in low-med traction conditions. A new design sees the chassis narrowed all round to provide less scrubbing in corners, leading to increased corner speed. This increases flex substantially, so to counteract this, the designers have recessed the diff and spool cutouts instead of cutting them all the way through. Not only does this bring the chassis back up to the desired amount of flex, it also improves aerodynamic performance by not preventing air from under the chassis being forced up into the car, detrimental to handling. As well as this, RC Maker have removed the holes for the short arm blocks as they compromise the strength and accuracy of the chassis, and also alter the flex characteristics. Screwing weight to the car is now even easier thanks to the added front weight holes, these can be used to screw RC Maker’s “Weight Shift” front weights to the chassis, giving drivers a place to add weight, whilst also being adjustable left/right. All of these features combined make for a chassis which is easier to drive, with more traction and faster lap times, in both Stock and Modified classes. The chassis is precision cut and countersunk in house in Australia from high quality 3K 2.2mm carbon.

View more images here

March 17, 2020

Xpress XQ10 brass & carbon fibre flex braces

Xpress have announced the release of new optionals for the XQ10 touring car in the form of brass and graphite lower bulkhead plates as well as a 3mm chassis stiffener plate. Starting with the bulkhead plates, the set includes a brass and a carbon fibre plate that can be individually installed under the bulkhead’s diff or spool area. They help to limit overall flex if desired plus the brass plate adding a certain amount of weight if conditions call for it.

Continue reading here

March 17, 2020

Power HD WH-65KG waterproof 1/5th scale servo

Power HD have introduced their new waterproof WH-65KG high-torque large scale servo. It offers 8.4V high-voltage compatibility, up to 65kg-cm of torque, a stainless steel geartrain for durability, double ball bearings and a blue anodised aluminium middle section. It is ideal for all heavy duty large scale applications including 1/5th scale cars.

View a list of the features and another image here

March 17, 2020

Traxxas Rustler 4×4 Sledgehammer tyres

Coming from Traxxas and made for the Rustler 4×4 monster truck are the new Sledgehammer tyres that provide extreme traction on a variety of off-road terrain. The Sledgehammer’s increased diameter provides improved ground clearance while the open-block design clears away mud and debris for exceptional traction on loose surfaces. They are perfect for both the Rustler 4×4 and Stampede 4×4 models as the increased diameter provides additional ground clearance and the extreme open block tread design clears debris for unmatched traction. A new heavy-duty wheel design provides additional strength and the eyes are sold pre-glued and ready to install.

Source: Traxxas [traxxas.com]

March 16, 2020

Bornhorst sweeps Holiday Hangover RC Arenacross 2020

The Holiday Hangover RC Arenacross 2020 was held in Moses Lake, Washington over the weekend, attracting over 270 entries including some of the country’s fastest off-road racers. In the premier class of 1/8th Nitro Buggy it was Tekno RC’s Joe Bornhorst with the overall TQ and also came out on top after the 30-minute A-main event, however he was hotly contested by Mugen’s Adam Drake with whom he swapped the lead several times. In the end Adam had to settle for 2nd overall, some 2.5 seconds behind Joe. Four laps down it was Marcus Anzivino (Kyosho) who would round out the top 3.

Continue reading the report here

March 16, 2020

Paul Ciccarello takes Tennessee State Championship title

The 2020 Tennessee State Championship was held at ROCCK Racing in Knoxville, Tennessee last weekend. The event attracted nearly 180 entries and in Pro Nitro Buggy it was Xray’s Adam Johnson with the overall TQ from teammate, Paul Ciccarello in 2nd. The 30-minute saw Adam out in front by up to two laps, however with less than two minutes to go he suffered a mechanical and had to limp his car around the track. Teammate Paul Ciccarello took advantage of this and took home the win with Adam still managing to hold onto 2nd place. William McIver (Serpent) came in 3rd overall to round out the top 3 result.

Image: William McIver

March 16, 2020

Jason Nugroho wins Indonesia Buggy Nationals opener

The Banana RC Track in Batam City, Indonesia held round 1 of the Indonesia Buggy Nationals this past weekend. A total of 24 drivers from Jakarta, Medan, Banjarmasin as well as local drivers attended the event whose schedule saw six rounds of 10-minute qualifying with the best four to count. Ultimately it was Jason Nugroho (HB Racing/Ninja) with the TQ honours, but he suffered a flame out in his semifinal and finished in 2nd place only. This meant he had to start from P3 on the grid, however after the 60-minute main final encounter Jason found his way to the top again as he finished a lap in front of Adrian Wicaksono (Mugen/Ninja) while Rama Danindro (Kyosho/O.S.) ended the race in 3rd, another lap down. Rizki Pradana (Mugen) came in 4th and Andre S. rounded out the top 5 result, also driving a Mugen.

View the final result here

March 16, 2020

Flash 7.4V narrow & LCG LiPo battery packs

RC Hobby Co. have announced the release of their new Flash brand competition LiPo battery packs. The range includes a new 7.4V 6200mAh 120C narrow pack, ideal for the latest breed of mid-motor touring cars where the slim pack helps to centralise weight while the 7.4V 6500mAh 110C LCG battery helps to lower the overall centre of gravity. Both are built using high-quality cells, making the batteries ideal for demanding competition racing.

View the LCG battery here