Red RC » 2wd

May 10, 2011

STRC Slash 2wd Universals & lightweight LCG Conversion

Carrying over design and material selection from their HPI Blitz and Associated SC10 universal kits, STRC’s Slash 2wd universal kits feature large diameter universal driveshaft bone for more durability against the power of today’s LiPo battery/Brushless motor combo, the heavier weight of short course truck and larger diameter of short course truck tires. They also used the same carbon steel material for axles, which features two sets of universal pin holes so you can get twice the life out of the same set of axles. The universal joints and joint pins are of carbon steel material as well and the pins features a “step” for the setscrew to have a flat spot to more securely hold the universal driveshafts together. Lastly, even the universal shaft roll pin at the end was not over looked. Carbon steel at the pin although strong will unfortunately add excessive wear to the diff outdrives, thus a different material was selected just for the shaft pin for durability and ease of wear on the diff outdrives.

Continue reading the product release here

May 5, 2011

Team Associated SC10 RS RTR truck

Team Associated’s SC10 RS (Race-Spec) is a Ready-To-Run R/C replica of the trucks driven in the Lucas Oil Off Road Racing Series. After winning the 2010 ROAR National Championships the SC10RS has received some major upgrades including the water-resistant high-power XP SC700 Brushless Speed Control and a water-resistant enclosed receiver box. The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 coil-over shocks. The 2.6:1 ratio gearbox includes a sealed gear differential with new heavy-duty internal gears and the externally adjustable V2 slipper clutch. The new KMC replica hex-drive wheels come standard on the SC10RS with high traction JConcepts racing compound rear tires and inserts for more grip. The XP3-SS 2.4GHz 3-channel radio system and XP S1903MG metal gear steering servo round out the SC10RS as a potent short course race machine.

View the full features list here

April 28, 2011

Losi XXX-SCT rolling chassis

The 1/10-scale XXX-SCT from Losi is ready to take on the short course. As a ROAR-legal rolling chassis, it comes out of the box completely pre-assembled with wheels and tyres. Electronics and motor is the choice of the driver and this means that from the standpoint of putting a race car on the track this all important choice is left to the guy that matters, the driver. It is also a considerable saving for those who want a ready built chassis but would rather choose the type of electronics combination themselves. Another race trait, the body shell supplied is clear. So, all ready to take that all important colour scheme that individualizes the truck and makes it stand out in a race.

View images of the rolling chassis here

April 21, 2011

Traxxas Slash 2wd Chad Hord edition

Traxxas have announced the release of their latest replica truck, the Boss Snowplow Pro 2wd of Chad Hord. This ready to race truck is supplied with a TQ 2.4Ghz radio system and Power cell 7-cell NiMh battery. The base is the same high quality truck from Traxxas with Titan 12-Turn 550 modified motor, XL-5 waterproof electronic speed control, water-sealed receiver box and steering servo, metal gear Magnum 272 transmission and Revo-spec torque-control slipper clutch but with the familiar racing colours of Chad Hord.

Source: Traxxas [traxxas.com]

March 4, 2011

Robitronic Smasher Short Course truck

The Smasher marks Robitronic’s foray into the short-course arena. Straightforward, bold faced and with loads of top-features to boot, the Smasher really appeals to newcomers and rc-enthusiasts eager to experience real racing atmosphere!. Designed as a 2wd short course truck, the Smasher builds upon the typical chassis optimized for extra ground clearance, supported by extra long a-arms and oil-filled shocks to stomach any terrain, you might want to race the Smasher on.

View more details and images here

February 16, 2011

Traxxas Slash 2wd Kyle Busch edition

Traxxas have announced the release of the Kyle Busch edition Slash Pro 2WD Short-Course truck. This Ready to race truck is supplied with a TQ 2.4Ghz radio system and Power cell 7-cell NiMh battery. The base is the same high quality truck from Traxxas with Titan 12-Turn 550 modified motor, XL-5 waterproof electronic speed control, water-sealed receiver box and steering servo, metal gear Magnum 272 transmission and Revo-spec torque-control slipper clutch but with the familiar racing colours of Kyle Busch.

View more images of the truck here

February 8, 2011

Darryn Johnson wins SC at JConcepts Clash

Venom Team Driver Darryn Johnson took the new Gambler Short Course Truck to the top step of the podium after a hard fought battle at last weekend’s JConcepts clash in Australia. After an intense qualifying battle, Darryn started from 2nd on the grid. With tricky track conditions because of intermittent rain, Darryn used the mid mount motor configuration on the Gambler to good effect and took out the first two finals, winning the event overall.

Source: Venom [venom-group.com]

January 26, 2011

JConcepts Tense wheels for Slash 2wd

New for the Slash 2wd JConcepts have released their Tense front wheels which are a glue-on, all-out competition inspired wheel from the ground up designed to withstand heavy abuse and perform under even the most demanding situations. The wheel design begins with a scale appeal and functionality that separates itself from the rest, while a heavy duty black nylon material and 12mm beefy hex design combine to form the ultimate in scale and performance. Topping off the appearance of the wheel are 2 optional open and closed center caps, one with JC logo for authenticity and brand loyalty. With 2 solid and 2 open center caps included, the driver now has the option for complete show with a closed cap or performance and function with the open cap. The center caps are secured to the wheel with included 6 – 2.5x8mm button head screws.

Source: JConcepts [jconcepts.net]